Assistant
REPLY |
GU on Android 6.0.x and 7.1.x, Allwinner T3 Quad Core 1.2GHz platform (new version of GU) - Discussion | [Car] Car and Android device |
Message#1 02.08.17, 21:22 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1336 Check in: 22.04.12 Innos D6000 Reputation: 172 | DiscussionGU on Android 6.0.x and 7.1.x platform Allwinner T3 Quad Core 1.2GHz (new version of GU) Car and Android device Discussion � | The original version of the state on T3 | Model K2001 State on T3 | Theme GU on R16 | Theme GU on T8 | XDA thread
Specifications OS Android 6.0.1 (there are firmware on 4.4, and appeared on 7.1.1), CPU Allwinner T3 - 4 corex A7 1.2 GHz core (sometimes 1.6 GHz is mistakenly written), display 1024x600 HD quality and high brightness. Capacitive frost resistant Multi-Touch. RAM 2Gb, built-in memory 32Gb (there are options with 1 / 16Gb and 2 / 16Gb). Sound amplifier TDA7851L (there are options with Toshiba TB2929HQ), FM module TDA7786 / TDA7703 / TEF662x, audio DSP Rohm BD37xxx / TDA7729 (TDA7719 indecodingMCU). It is possible to distinguish GU from other options on T3 by the settings menu, it is in black letters on a white background, see photo. A photo Firmware Attention, all actions you do at your own peril and risk. If everything works well, everything turns on, turns off, does not puff, does not buggy - then you do not need to flash anything! This is especially true for the MCU, if something broke during the MCU firmware, roll back to the previous version and do not touch it anymore, the MCU flash drive has a very delicate memory, and there were cases when you received the MCU after the firmwarekripich, so think ten times before stitching an MCU. There are no ways to restore a brick with a damaged MCU firmware today, just replacing the motherboard. Official firmwareAndroid 4.4forAndroid 4.4 ownerson this gland: Android 4.4 Official firmwareAndroid 6: Android 6 Version 8.2.1
Version 8.2.2
Version 8.2.3
Official firmwareAndroid 7: Android 7 Android 7 firmware haveother firmware file names, to update from Android 6, you need to rename files from Android 7 to the names you expect to see 6. However, it is important - with this updateold uboot remains. Method and files forupdate ubootand a full update from 6 to 7 or rollback from 7 to 6. Another version of rollback from 7 to 6 is throughemergency flashing mode.
VariousMCU, also come bundled with firmware: MCU Attention! When flashing an MCU with a different type of radio module, the radio will not work. When flashing an MCU with a mismatched audioDSP type, the volume, balance and equalizer will not be adjusted, or it will be done incorrectly (Section 20 of the FAQ). On which radio and DSP the MCU firmware is also designed in its description when selecting, and can be seen by double clicking on the MCU version.
Equipment composition decryption program for MCU firmware name from R16. Enter the version without T at the beginning, the decoding accuracy on this PG is not verified. MCU + 1.4 + (+ 4core) .exe(89 KB) Modifiedfirmware. All firmware fromdickjoneslooklink: Android 6: Android 6 mod
Android 7: Android 7 mod
MCU File Firmware Firmwarebd07a5ee-fbb0-11e4-ae78-000c29ba27c0can lead toloss of car choicein ExtraSettings, do not flash it if you are not sure that it is suitable for your PG. The firmware of different manufacturers differ, at a minimum, with the identifier in build.prop, when you install "someone else's" firmwarewill be red inscription - "UI unauthorized, please contact the supplier". Performance does not affect, but unpleasant. You can fix itlike this(requires root), orlike thisEditing the firmware file before the firmware. To distinguish the manufacturer can be spelled at the end of the firmware version. If you are not confident in your abilities, it is better not to install firmware from other manufacturers. JP1 - Youmecity TW2 - TopWay KED1 - Kaier JYZC1, JYZC2 - ??? AKW1 - ??? there isprobabilitythat both are Infidini TH6, TH6-A -Tocado(Shenzhen Tonghai Create Electronics Co., Ltd. -http://www.tocado.cn Compliance analysis here, please send informationcastelo. For the firmware insert a USB flash drive with firmware in the root directory, enter the Settings menu ->General (Car Settings) ->System update or MCU update.Here is the instructionand here is the instructionin pictures(from another State on R16, but the procedure is similar (and the firmware is different). The same instructionin Russian. Very detailed and correctfirmware manualfrom redpower.ru.Recommendeddo a reset to factory settings (Factory reset) after the firmware! Mirror firmwarehere, making copies is welcome.Mirror copyon 10/14/2017 from edi_08. What is an MCU and why should it be stitched separately? The MCU is a specialized microprocessor that controls the entire PG, turns it on and off, adjusts the volume and equalizer (giving commands to the audio processor), radio (tuning to frequency, RDS), Bluetooth, switching audio and video signals, handles button clicks on the steering wheel and signals from Canbus where there is, etc. If you exaggerate a lot, you can say that this is one of the main devices in the PG, and the block on Android is only a beautiful interface to it. More details likehere. And the MCU file is its firmware (in encrypted form, decrypted during the firmware process). Firmware of something "wrong" in the MCU is a good chance to turn a radio tape recorder, lose control or functionality, and something "wrong" - fix existing glitches in the above (together with the correct setting). The resource of MCU flash memory (pdf 1000 rewriting cycles, but there are nuances) is less than the board on Android, so you should not reflash it too often.Heremore details. If there was an MCU firmware error - do not turn off the GU, try to sew up the version that you had before, and hope that it will work. There are no ways to restore the GD after an unsuccessful MCU firmware, except for a complete replacement of the motherboard, and bricks sometimes really happen. But in most cases, everything goes fine. Do not flash the MCU, if all this works for you and everything suits you. FAQ - Regularly updated
Cap changes
Attention! Discussion of the original version of the GU on Allwinner T3in this thread, discussion of version K2001in thisThe new version is here. Iron and firmware of different versions of PG are not compatible. To understand what your topic - look at the Android menu settings. Is it in black letters on a white background? This is a new version of the State, you are in place. Is it in white letters on a black background? Youhere. Does it have a menu block on the left, and does the firmware version start with K2001? Youhere. Not sure - hereFAQ-type GU, or bring here a screenshot of the menu system, they will help you. PSAllwinner T8 branch here. Topics Curator: There is no curator in the subject. For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links. M Withdrawing from supervision Post has been editedkumarai - 08.05.19, 12:34 |
Message#2 02.08.17, 23:30 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1336 Check in: 22.04.12 Innos D6000 Reputation: 172 | GU type identifier on Allwinner T3. There are people who have several types of GU on Allwinner T3, which have different firmware, sewn up differently; menus look different, different features work differently and settings are invoked. Iron is also incompatible. The common thing is that they have an Allwinner T3 processor. In order to avoid confusion, it is better to indicate the type of PG in the signature. I propose to call those GU on T3, which were first discussed on Android 4.4hereand then on android 6.0 inthis topic, original version, and those that appeared later and remind and look like R16 -new option. They are discussed here. So, differences between GU on Allwinner T3 ATnewversion of GI on T3,topic on GUhere: 1) Settings menu - in black letters on a white background, viewing versions - "About the tablet", see the photo below. 2) The engineering menu is called in Settings ->General (Car Settings) ->Extra settings (password 123456), for which they are often called extra settings. The password for entering the menu is 123456, some other menu items are also locked with passwords, there are suitable oneshere. 3) Versions and firmware files - versions are referred to as version + date + machine code for CANbus / hardware ?, for example, V8.2.1_20170419.173320_JYZC1, MCU versions as T + version + code + date, for example T5.3.19-24-10- C06101-170418.FilesThe firmware looks like several, usually 4, files with names - GUIDs, some of which with extensions .0 .1 .2, GUID encodes the purpose and type of GU, for example, e24b0eb4-f9b4-11e6-813c-fb743717e00b.0. 4) Method of firmware - insert a USB flash drive with firmware in the root directory, enter the Settings menu ->General (Car Settings) ->System update or MCU update. 5) Iron options - PG is usually more compact, or supercompact (about 5 cm deep) execution. The firmware is based on the recompiled version of the one that was previously used on the GU branch on Allwinner R16, its discussionhere. The processors themselves are very noticeably different, direct transfer of firmware is impossible - there will be a 100% brick. ATthe originalversion of GI on T3,topic on GUthere: 1) Settings menu - in white letters on a black background, viewing versions - "About phone", see photo below. 2) Engineering menu - called alternately by clicking three times, in turn, on the Kernel version - OS version (Kernel version - OS version). There are no passwords to enter or configure anywhere. 3) Versions and firmware files — versions and naming of firmware are calculated according to the BT module model and release date, for example, BSP1.3-IVT-170228 for MCU — radio module (TDA7786) and DSP (TDA7719) chips are additionally written, for example, 1.13.5.00 -20170225-77867719T. The firmware files are os_update.zip and mcu.bin, plus the firmware (or download) from a specially formatted bootable microSD card. 4) Firmware method - insert a USB flash drive with a firmware file in the root directory into the downloaded GU, optionally choose what to flash, confirm the firmware in the pop-up menu 5) Iron options - in older GG the processor daughter board is installed on top of the mother board, on the newer ones - on the bottom. Outputs (and entrances) - tulips can be bred on pigtails, or soldered on the board. From a software point of view, iron is more or less identical, the exception is the need to add a wire and a capacitor to an audio DSP for navigation mixing to work. About the phone, the original version of the GU Firmware from one model to another, due to the different firmware mechanism, do not fit. Firmware and MCU, and Androidincompatible with each otheras iron. Use tips from one version of the GU in the subject on the other should be with caution. The pinout of the PG connector and the colors of the wires, for example, do not match. In optionK2001State on T3,topic on GUthere: 1) The settings menu block is located on the left and is always visible, see photo below. 2) Additional settings are made through a separate shortcut in the Car Setting applications. The engineering menu is in Car Settings - Factory Settings, password is 1617, for a larger number of available settings is 16176699. 3) Firmware versions are called K2001_xxx_Syyyyyy. Models K2001_NWD_S112101, K2001_YZG_S212104, K2001_TL_S212103, etc., the general - K2001, therefore this name. On the processor board sticker K2101_G. 4) Firmware mode - write update.zip and update.script to the USB flash drive in the root directory, insert the USB flash drive into the loaded and working GU, the firmware will start automatically. It is possible that only one of the two ports is suitable for the firmware, and to start the firmware you will have to go to Car Settings - Factory Settings and select Update there. 5) Iron options - GU compact, or supercompact (about 5 cm in depth) performance. 6) It is Android 4.4, sometimes forged for 5 or 6. The recently delivered 6.0 already has an honest Android. The Android version is better to check with third-party programs, focus on API Version 19 (4.4.x) and 23 (6.0.x). What is displayed in the regular menu (5.1 or 6.0), happens, does not correspond to reality. The settings menu looks like this: First casethe emergence of such hardware and firmware inshelline. Firmwarehere. Photo iron andexperiments with firmwareand cooled from tophos. Continuation. Archive firmware for all options holdhereI will try to keep it as long as possible, but if someone makes a mirror - only for. Post has been editedbazanovv - 13.10.17, 14:45 Reason for editing: Updated information about K2001 - there are 6 Android -------------------- Bonroad C1060706A5 (2Gb + 32Gb, Allwinner T3_p3 original version, with tulips on the GU board) os 2017.07.18 mcu 2017.07.18Allwinner T3 / T8 Themes |
Message#3 03.08.17, 00:08 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1336 Check in: 22.04.12 Innos D6000 Reputation: 172 | Colleagues - owners of the new version of the State University! mick63 mv-alex, wcnu87 SilverOne74, castelo denis.imm niton, ZerG16rus 2869684, anti-snayper ice_zirg _kaktuz_, ruslanvas, Audi_007, olser69, nikniknik27 BRILok, Genok84, GreenMuzzy, pilotmg, kostations, Vladimir_kud, Su = 27, _re,and excuse me if I forgot anyone else. Now you have your own theme, settle in, make yourself comfortable! Welcome! Post has been editedbazanovv - 10.08.17, 07:33 Reason for editing: Add-ons -------------------- Bonroad C1060706A5 (2Gb + 32Gb, Allwinner T3_p3 original version, with tulips on the GU board) os 2017.07.18 mcu 2017.07.18Allwinner T3 / T8 Themes |
Message#4 03.08.17, 09:31 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1193 Check in: 08.01.10 Reputation: 79 | Thanks for the invitation! Where do we start? With problems? I do not like the work of GPS. Out of the box, everything seemed to be ok. But for the holiday I drove 3000km and several times the GPS fell off. Were treated only by rebooting the radio. Now installed redmod. At the moment, the radio cassette sees satellites rather badly. The antenna is fixed on the car rack. I think to go still to see something change or not I also do not like the brightness of the screen. In comparison with the container version T3 - the sky and the earth. Post has been editedniton - 03.08.17, 09:33 -------------------- |
Message#5 03.08.17, 09:46 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 504 Check in: 12.04.13 Reputation: 15 | I don’t really compare with anything, everything seems to be less. I don’t like that the radio station doesn’t work, the station doesn’t switch from the buttons on the steering wheel, but it is searching. Android 4.4.2 I want to update. And, yes, even the button illumination does not work. Post has been edited2869684 - 03.08.17, 09:46 |
Message#6 03.08.17, 10:10 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1193 Check in: 08.01.10 Reputation: 79 | 2869684, switching by stations - update to red mod or receive Ruth and replace the Radio application. And so that the arrow worked adequately - they assign it to the nation as the default application. The rest of the programs of the nation and so make their way Post has been editedniton - 03.08.17, 10:13 -------------------- |
Message#7 03.08.17, 10:15 | |
Visitor [offline] Group: Active users Messages 22 Check in: 02.12.10 Samsung Galaxy Note 3 LTE SM-N9005 Reputation: 0 | And what's the difference with redmod? How not found an explanatory description of them. Revealed small kosyachki. Sometimes an image with a ccd becomes black and white. He stopped playing the right rear speaker, although the sub takes the signal from this channel, the thing is incomprehensible. Player. Rarely, but sometimes, the song itself starts playing from the beginning, i.e. switches to the beginning. Well, everyone knows the wrong switching of radio stations from the buttons on the steering wheel. And so, in general, like everything) |
Message#8 03.08.17, 10:23 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1193 Check in: 08.01.10 Reputation: 79 | |
Message#9 03.08.17, 10:25 | |
Visitor [offline] Group: Active users Messages 22 Check in: 02.12.10 Samsung Galaxy Note 3 LTE SM-N9005 Reputation: 0 | In general, the player is a bit annoying, all the folders that you have with the music are thrown into one pile. No matter the folder in the folder, Everything goes one after another, it turns out such an endless list of folders - inconvenient. Did not find how to play multiple folders or there is no such function at all? Who uses which player? I didn’t pick myself up so that it was the type of favorites, so that I could play by folders .... Posted 08/03/2017 10:27: niton, niton, you can look, whoever was already asked? |
Message#10 03.08.17, 10:44 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 98 Check in: 23.12.07 Reputation: 4 | I purchased a usb hub, at first I did not see the USB flash drive. I decided to delve into the settings. In extra settings I found the point extSD1, turned on compatible, voila, the Hub works, writes usb1-1, usb1-2, etc. Post has been editedolser69 - 03.08.17, 11:00 -------------------- GU indifini Allwinner t3 new version (port R16), Huawei P8 lite |
Message#11 03.08.17, 10:58 | |
Visitor [offline] Group: Users Messages 10 Check in: 15.09.08 Reputation: 0 | RedMode worth buying? In stock, everything suits in principle. Perhaps there is a significant difference? |
Message#12 03.08.17, 11:31 | |
Guru [offline] Group: Moderators Messages 3115 Check in: 25.02.11 Oneplus 5 6/64 Reputation: 586 | M The topic has been moved to the destination section. bazanovvappointed curator of the topic. |
Message#13 03.08.17, 14:23 | |
Novice [offline] Group: Active users Messages 31 Check in: 17.10.10 Reputation: 0 | MCU: T5.3.EQ-145-30-C06101-170417 System: V8.2.1_20170410.135936_JP1 Worth on Toyota RAV4 2011 About the problems with the sound. Here that it turned out: Columns sounded in antiphase, but the pinout in the standard pads did not touch. Both front and rear speakers were in antiphase. I changed the phasing in the block from the GU in the front left and rear left speakers and the sound became normal. There was such a glitch: if during radio playback, transfer the balance in the equalizer to the rear speakers and switch the radio to the radio, the balance jumps to the front speakers (and vice versa) and does not change in the future. Looks like a problem in the DSP. Tell me where to dig? (can flash MCU or firmware? Will RedMod help?) |
Message#14 03.08.17, 15:40 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 504 Check in: 12.04.13 Reputation: 15 | |
Message#15 03.08.17, 16:18 | |
Veteran [offline] Group: Curators Messages 1643 Check in: 07.05.10 Xiaomi Redmi Note 6 Pro 4/64 Reputation: 316 | 2869684, Installed the radio from the February firmware, now switches the stations from the steering wheel, and does not look for the frequency com.tw.radio_78cc.apk(390.41 KB) -------------------- �� Allwinner T3 1.2GHz downloadAndroid 7.1.1 |
Message#16 03.08.17, 16:20 | |
Visitor [offline] Group: Active users Messages 22 Check in: 02.12.10 Samsung Galaxy Note 3 LTE SM-N9005 Reputation: 0 | [/ SNAPBACK]kostations, and how to put the radio? Just over the current rolled apk? |
Message#17 03.08.17, 16:21 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 504 Check in: 12.04.13 Reputation: 15 | |
Message#18 03.08.17, 16:47 | |
Veteran [offline] Group: Curators Messages 1643 Check in: 07.05.10 Xiaomi Redmi Note 6 Pro 4/64 Reputation: 316 | |
Message#19 03.08.17, 16:49 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 98 Check in: 23.12.07 Reputation: 4 | |
Message#20 03.08.17, 17:28 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 504 Check in: 12.04.13 Reputation: 15 | Rolled on top of a new radio, it replaced the old |
Message#21 03.08.17, 20:45 | |
Visitor [offline] Group: Users Messages 14 Check in: 08.08.09 Sony Xperia XA Reputation: 1 | Hello forum users! Please tell me what version of GU I have, otherwise I'm confused in the land Also, the seller on Ali claims that I have a 1.6 GHz processor, and Antutu and Cpu-Z say 1.2 GHz. Who should I believe? Took here Post has been editedshishkaridze - 03.08.17, 20:49 Reason for editing: Added a link to complete the picture -------------------- Infispruce Allwinner t3 (new version) for VW |
mobile version | Now: 05/25/19 00:40 |