CPE903-1 (CPF903) 3G 4G LTE WI-FI router - discussion [CPF903_PCB_V2.0_20180813] | [Ltemodem, 3gmodem, wifirouter] | 1x100Mb



Rep: (0)
CPE903-1 (CPF903) 3G 4G LTE WI-FI router [CPF903_PCB_V2.0_20180813] - discussion
ltemodem, 3gmodem, wifirouter | 1 • 100Mbit \ s

Attached Image

The forum decided to post images under the spoiler

Description
-4G WiFi router provides wireless data transfer rates up to 300 Mbit / s
-Proizvodim access point WFi 2,4 GHz WiFi coated with a powerful 300 square meters
-Access to the Internet connection up to 10 WiFi users
-Internal dual antenna, the choice of 4G / 3G signal
-Stylish and thin design blends perfectly with your home
C LCD display, easy to see the status of
Specifications
Brand: TIANJIES
Modem function: Yes
Type: Wireless
Wired transmission speed: 150 Mbit / C
WAN-ports: 1x300Mbps
Number of USB Interfaces: 1 x USB 2.0
Supported speed Wi-Fi: 2.4 D
Maximum of LAN data transfer rate: 300 Mbit / s
Model Number: CPF903-32
Standards and Protocols: Wi-Fi 802.11b
Standards and Protocols: Wi-Fi 802.11n
Standards and Protocols: Wi-Fi 802.11g
Wi-Fi Transmission Standard: 802.11n
transmission rate of Wi-Fi 2,4 GHz: 150 Mbit / C
LAN Ports: 1

Topic Curator: Topic with no curator


Posted on 03/03/2020, 19:40:

How to change the IMEI, which would work with a SIM card (tariff) for a smartphone?



Rep: (0)
To change the device IMEI need to download and install drivers.
driver installation instructions:
1. Download the archive Drivers for writing IMEI CDC Serial.zipAttached filedrivers-for-writing-imei-cdc-serial.zip(15.28 KB)
Unpack your computer. You can also use an alternative driverAttached fileDrivers_MTK.zip(18.36 MB)

2. Open the Device Manager. Making the illuminated "your computer" by clicking once on the "Win-XXXXXXX". Click "Action" and select "Add legacy hardware."
Attached Image

3. click "Next" ->In the next window, select "Add New Hardware, selected from a list"
Attached Image

Attached Image

4. click "Next" and the following window click on the "Have Disk"
Attached Image

Attached Image

Attached Image

5. Then click "Browse" and select the file in Windows Explorer cdc-acm.ini folder "Drivers for writing IMEI CDC Serial". Click "Open" and "OK".
Attached Image

Attached Image

Attached Image

6. Select one of the available drivers and click "Next" ->"Further" ->"Done" (if still be stops on the "Get kernel port" in the program, then try to choose a different driver). If in the process window pops up with a warning "Do not verify the publisher of this driver" - confidently press on "I would like to install" (digital signature verification from the driver at the same time must be disabled in the system, otherwise it will not be installed!)
Attached Image


Next, set your computer Maui METAAttached fileMauiMETA_exe_v10.1816.0.01.zip(44.87 MB)

Run Maui META.
In the window that opens, set the parameters as in the photo:
Attached Image

Click "Connect" in the lower right corner of the window and immediately connect the disconnected the router to your computer using a USB cable. The program will begin the initialization process unit.
Attached Image

Attached Image

After connecting the device to the Maui META router must be defined in the program and have the status of "Connected".

edit the IMEI

1. Click "Load DB" button (2)
2. In the pop-up window, select the "From target" (3)
3. click the mouse to the search box (5) and select the "IMEI Download" (6)
4. In the window that opens, click "read" we click 2 times on the line with your IMEI, prescribes new IMEI (7), the checksum will register itself.
5. Push the "Write" (8), and if successful, pleased inscription "Write IMEI to target successfully" (9).
6. Turning off the device from the computer.
7. Insert the SIM-card and turn on the router.
8. Go to a web muzzle device (in the address bar of your browser write 192.168.199.1) Username / password: admin / admin and in the Information calibratable new IMEI tab.
Attached Image



Rep: (0)
Port forwarding it can be done?



Rep: (0)
* nik-mikkr , With custom firmware I think not.



Rep: (5)
Prompt at milestones so or not?
Why is not stored "4G only" priority settings. After the restart, setting the priority indicates "2/3 / 4G".
While setting vayfay network remain persistent across reboots.



Rep: (0)
* kuz00 Yes the same garbage



Rep: (0)
Good evening!

Is it possible to configure ipTables this modem?


Full version    

Help     rules

Time is now: 11/03/20, 00:25