TP-LINK Archer A6 V2 (AC1350) - Discussion | [WiFirouter]: 450MB \ S - 867MB \ s + 4x1gb



Rep: (3323)
TP-LINK Archer A6 V2 (AC1350) - discussion
Wifirouter: 2.4GHz (450Mbit \ s) - 5GHz (867Mbit \ s) + 4 • 1Gbit \ s

A photo
Attached Image
Description
The new model of the router from TP-Link, which will be interested in those who are looking for a modern and productive router for a good price.
On the basis of TP-Link Archer A6, you can create a quick and productive network. The speed and performance of this network will be enough to view the video as 4K, online games, load torrents at high speed, etc. In addition, due to support for the standard 802.11ac and gigabit ports, you can easily broadcast movies in 4K on a TV DLAN technology. Only the TV and the device from which the broadcast will be going to recommend connecting to the router either by cable or via Wi-Fi in the 5 GHz band.

In addition, the Archer A6 has powerful antennas (four external and one internal), at the expense of which the router gives a good Wi-Fi network coverage. Judging by the reviews, very good Wi-Fi range in the 2.4 GHz band. The network coverage in the 5 GHz range will not be so large, but this is a feature of this frequency, and not the problem of the router. There is support for the BeamForming technology (sends the Wi-Fi signal towards the device).

As for the program part, everything is very good here. On TP-Link Archer A6 installed firmware with a new web interface. It is possible to choose a web interface language (Russian, Ukrainian and English). Well, the control panel itself is very simple and pleasant in appearance.
Specifications
Main characteristics
Plastic case
The colors used in the design of Black
TP-LINK manufacturer
ARCHER series
Model Archer A6.
Type of equipment Router WiFi Find similar Wi-Fi Equipment
Description WiFi router
Buttons RESET, Wi-Fi ON / OFF, WPS
Manage web interface, via TETHER, Mobile application for iOS or Android
Support for Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista
Delivery and Options
Delivery kit power supply, RJ-45 cable, User Manual Set в„–1
body Features
LAN, POWER, USB, WLAN indicators, WPS
Fastening options Fastening to the wall
Operational parameters
Operating temperature 0 ~ 40 В° C
Communications
Wi-Fi IEEE 802.11ac standards, IEEE 802.11a, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
The interface connectors and output
Gigabit ports 4 port 10/100/1000 Mbps
WAN ports 1 RJ-45 port
Other features
Other support beamforming
Security
Firewall SPI (Stateful Packet Inspection), protection against DOS attacks, parental control, IP filtering, filtering by MAC addresses, domain filtering
WPS (Wi-Fi Protected Setup) is supported
WPA2-PSK data transmission security schemes; WPA-PSK; WPA2; WPA; WEP encoding with a 64- or 128-bit key
Network characteristics
Protected VPN protocols PPTP, PPPOE, L2TP
IGMP support (Multicast)
Getting IP Address Static IP, Dynamic IP
QoS is supported
WMM support (Wi-Fi Multimedia) supported
VLAN supported, IEEE 802.1q
Virtual Server supported, Port Triggering
DMZ supported
DHCP server is
Nutrition
Mains power supply
Power supply external, complete power supply
Wireless signal and transceivers
Output power, wireless networks 23 DBM
MIMO MU-MIMO support
Modes, wireless networks AP
Maximum speed WiFi 867 Mbps
5 GHz wireless communication frequency, 2.4 GHz
Dual-band network supported Wi-Fi routers, adapters, access points with dual-band support
Receiver Sensitivity (802.11a) -93 DBM
Receiver Sensitivity (802.11g) -78 DBM
Receiver Sensitivity (802.11n) -71 DBM
Receiver Sensitivity (802.11ac) -62 DBM
External antennas 4 antennas (non-removable + non-removable + non-removable + non-removable)
Dimensions (width x height x depth) 230 x 35 x 144 mm
Packing dimensions (measured in Nix) 32.97 x 24.18 x 7.6 cm
Gross weight (measured in Nix) 0.8 kg
Useful information
MU-MIMO - The router has support for MU-MIMO technology. The presence of this technology increases the speed and performance of the wireless network. Due to the fact that the router can simultaneously exchange data with multiple Wi-Fi clients (if there is also support for MU-MIMO).
Optional solution with wifi connection breaks
Instructions for those who have damaged Wan port

Topic Curator: Topic with no curator


Post has been editedAndrewP_1 - 21.07.20, 16:22
Reason for editing: instructions for those who have damaged Wan port



Rep: (36)
An excellent router passed the AC10U with a surcharge took this satisfied. The network is stable at 5GHz issues the claimed. One species causes aesthetic satisfaction. : OK: Very good for the state employee.



Rep: (3323)
* sturface,
Also replaced my TP-LINK Archer C50 for this due to gigabit bandwidth and fresh technologies, in general updated: yes2:

Post has been editednoskojv - 29.08.19, 17:48



Rep: (3)
Something the topic is quite inactive, really so little owners?
Actually the question, acquired almost the same modelTP-Link Archer C6, On the Internet in 1Gbit, on WiFi 5Hz, on the prefix MI BOS S4, it gives only 200-250 Mbps, I want to know how others are doing with speed, only my router does it cut or is it the problem of the entire line?



Rep: (36)
NEMA7 @ 08/31/19, 17:49*
Router so cuts
Why did you decide that it cuts. The prefix takes into the cache as much as it is necessary and with the speed with which "she" is enough so that the data stream does not occur. For HD data of television, it is enough 2 megabytes / s + -. All of your norms. You can check the real output speed of 5GHz in FTP with flaws , personally gives it an approximately 85 megabyte / s. This is about 680 megabits / s (FTP protocol I think it cuts off) with the stated 867 email / s. Very not bad result
And the prefix takes what she needs.

Post has been editedsturface - 01.09.19, 00:42



Rep: (3)
* sturface,
Then why do the speed check missions give no more than 250mbit? How, in this case, check the maximum speed that the router gives via WIFI?



Rep: (3323)
NEMA7 @ 09/01/19, 10:46*
Speeds give no more than 250mbit?
Perhaps the bandwidth of the device on which you check is limited to these parameters.

Post has been editednoskojv - 01.09.19, 08:50



Rep: (0)
I think to buy, not bad but firmware "0" sorry !!!!



Rep: (3323)
Sirenko @ 05.09.19, 16:43*
Not bad but firmware "0" sorry !!!!
Therefore, there is no need for them, it works out of the box normally.

Post has been editednoskojv - 05.09.19, 14:48



Rep: (89)
Hello! I apologize that I am not writing about the topic. I have a similar router Archer C6 V2.0. The fact is that in the settings of the WPS router turned off, and the Wi-Fi hacking program (WPS Connect) indicates that WPS is turned on. Those. My SSID program shows green (see screen), which can be hacked. And should be red, because In the WPS settings is disabled. What's wrong here?
Attached Image
Attached Image
Attached Image



Rep: (2)
screted ssid, and you overloaded a router after daw removed from WPS



Rep: (89)
* Oldgudwin ,
OldGudwin @ 09/11/19, 0:03 *
You overloaded a router after a daw removed from WPS

Yes.
Where is the hidden ssid? If the WPS disabled, the program should not have breaking this network ... There's something wrong here, there should be no such ...
There is another router (ASUS RT-N12VP), there, too, the WPS is disabled and the program shows red without hiding SSID



Rep: (2)
* Albert_Salimov,

If you hide the SSID, it will not be visible to the network name, respectively, no one will break if it is not necessary to know the name of the network. Check you have on both WPA2-PSK networks and encryption AES, come up with a password of the wedding + special march 10 digit, also check the guest network. In the extreme case, reset to the factory and once again the mood all over again.

Post has been editedOldgudwin - 14.09.19, 02:23



Rep: (89)
Wrote to TP-Link technical support about it, they replied that when WPS is turned on, then the WPS Connect program displays the network in red ...
Attached Image



Rep: (1)
The apparatus is frankly raw. V1.1 is constantly falling off WAN, so far it is impossible to work. I hope the firmware will be firmly.



Rep: (90)
NEMA7 @ 08/31/19, 17:49*
According to WiFi 5Hz, on the prefix MI BOS S4 it gives only 200-250 Mbps

This prefix on nurses can no longer.



Rep: (36)
Exclus1v3 @ 09/20/19, 22:22*
The apparatus is frankly raw. V1.1
Here version V.2.



Rep: (22)
Tell me, this router is suitable for Rostelecom, namely for IP TV?



Rep: (3)
Igor-TLT @ 09/25/19, 19:15*
T for Rostelecom, namely for IP TV?
Suitable, works without problems



Rep: (2)
The device three times on the day cuts speed up to 10 Mbps. It helps only reboot. Cuts on Lana and by air. Technical support is silent



Rep: (0)
Hello ! Does anyone tell me what antennas are responsible for 5gz, medium or sides?


Full version    

Help     rules

Now: 03.01.21, 03:56