If anyone interested won the sound when the TV is turned off. It turns out after turning off the TV and the loss of sound you need to re-add volume and ... it is now saved when the TV is turned off, and after the TV is turned on, another saved volume of the O.O volume is turned on. Two separate volume levels with memory: Girl_Cray:

Question:
1. Is it worth updating constantly updating programs (such as Lazymedia Deluxe)?
2. How to update correctly if it is? Just installed on top of installed or demolition and installation on a new one?
3. If you put on top of the existing, whether the settings remain or everything will need to configure again?
Thank.

Kestol ,
1. It costs because different changes are made \ feathers.
2. No need to remove anything, just put on top.
3. nothing will disappear everything will remain as it was.

Happy New Year!
Yesterday I was going with my thoughts, I read everything about the firmware of boxing, about how to close the contacts, etc.
Sell, pushed USB from the laptop to the console, download the necessary files, in parallel I read the additions to the firmware.
After 7 minutes, the box was lit by the inscription BOOT ... But the computer does not see him, I tried different yusb ports.
The reaction is generally zero the reaction at all, kept shedding secrets 10-15.
Okay. Give me, I think, I change the ports again. Perebed. Boot ... and on the box the watch tanned with the right time o_o
Supplied to the TV - everything works as before. Data none dropped.
Otherwise, as a New Year's miracle and you won't call))

Post pliz generic.kl and vendor001 from the stock firmware pliz. Thanks in advance!

Dear connoisseurs, bought this miracle recently, a bunch of back texts reviewed and ...... here:

Miracle At the first inclusion began to flash the Ecrand (HDMI), then after a few overloads, it began to be clarified on Bluetooth, it hung up several times / rebounded and invested me on the lying droid and now.
HDMI does not work (well, let's drink someone, as it jerked and came to him kapets), but there is an analogue ... The analog is working (although the video goes through the right tulip), but also on it a few minutes - black ekran and Again for a few minutes - a car of the reboot.
I understand it is Chinese, but not half a day)))))

So the question is: maybe this overheating is some or x / s

I even stitched the cable, the firmware approx ... And there is no sense.
______________
That's just not touched - and 5 minutes she lived, Batz and a black screen))))))

Post has been editedhottake - 04.01.20, 22:30

hottake And when you go to the stock recovery, the prefix does not reboot? What firmware flashed?

Most likely you used your HDMI? The native cable is not high-quality, a lot of people complained about him, including my image too, I also had an image. Try another cable.
It can also blink when using the AFRD program or another that changes the frequency.

You are right, unpacking tulip here is non-standard.

Is it by chance not when watching IPTV?

The cable was both the same

Black Ecraran observed only when loaded android, even if I don't blow on it, but it fades that you no longer see if you don't pull the cord))))

Posted on 04.01.2020, 23:46:

Sarikazzz,
That's just stood for 10 minutes in the recovery and was alive, but as soon as I kicked the restart menu - we no longer see each other))))

Posted on 04.01.2020, 23:49:

On the board written A95xF3_v10
It is so for general development

hottake , A bit unclear. In the recovery, I haven't done anything anything yet, as soon as you start moving along the Rekkovery menu, or what?

Not, in the recovery he simply does not hang, I pulled the menu to see if the rewind, but only a reboot, he already had any image, while on the prefix he writes boot and then time, well, not actual of course.

diman19,
Would be grateful thanks, we can ride, although I hope that I will be the last one of the "Boxes took out the corpse")))

You marriage, most likely caught, it concerns cooling. Perhaps the cooling radiator is incorrectly installed.
You have 5 minutes when starting - install APK from a flash drive - CPU Monitor. Or run trotling test. Task - track the temperature.

You can put the cooler under it, if there is an opportunity to cool down the temperature to clarify the tests.
If you have through the tulip, the same thing is not an HDMI problem.

Android_rex,
By HDMI, we are no longer visible at all, only tulip.

The problem is that the title of "Miracle" she still worked for an hour 1.5 and only after that began.

I wrote first the blinking of the Echana (as when installing Windows), then swore on Bluetooth, and somehow Batz and came out. Well, it was the thing that Android stood up when I was not aware of the scale of Buga, it alerted me and I immediately began to collect evidence for Ali.

Somehow going with the forces and try to argue with the temperature, only at first I'll wait for a kind person diman19, Rows a flash to it.

Post has been editedhottake - 05.01.20, 00:51

I will not say categorically, but it seems to me, I found the reason for the unstable work Waifa on Ampaca6212.
Problems began relatively recently, namely after receiving the G30S panel.
Apparently the remote makes it interfere with the drift signal. Without it, speed as the usual limits of the provider, and with the remote control speed begins to pour 2-3 times, and on unloading the test stops with an error (not always, but not less than half aisle). And the cursor during unloading "freezes", if you wash them on the screen.
###
On the old box 16 years (S905x NEXBOX A95X)
The Internet with this console works perfectly, without jambs - but there are wiring with the selection of antenna.
###
Request the winner of ampaka 6212 and G30S (G10, G20) to drive the box of speedtest and unsubscribe.

Today I played with the prefix and different players to withdraw multichannel sound on optics. In addition to Vimu, no one rolled. Used VLC (for convenience I liked the most), MX, Nova Video Player. Could remove the multi-channel only Vimu. But, he seemed to me more inhibited than VLC or MX (slowly loaded and somehow all slower when navigating during viewing). And more about Vimu: In the Recommendations for Setup "Use Vimu Engine - ON". I put it as recommended, I am rejoice in multi-channel sound, but after viewing from the services and an external disk connected to the USB console, I entered the network to the computer to check the movie via Vimu, and here the window jumped like "You use Vimu Engine, this type of file Do not reproduce. " I go to the settings and turn off Vimu Engine. It seems like looked. And then when viewing from anything, it took again to include Vimu Engine. What, constantly change: then turn off, then disable. Something somehow not ice. Or I misunderstood something or unstorn.

Who does not operate the Enter key on the remote keyboard.
I'll show an example on your console


My button is defined as the 28th. You can determine from thisthe program.Next, we go along the way \ vendor \ usr \ Keylayout \ generic.kl and change the code of the 28th button.

on


If after that there are problems with entering text with a remote control on a virtual keyboard, change everything back)


Post has been editedSarikazzz - 06.01.20, 19:26

I put everything myself, the copper ordered from Ali. Glued on thermo wired glue. The temperature to all this alterations during about an hour in the tank was 72 В° after 55 В° when viewed 4K above 46 В° did not rise. And this kind of bottom



Post has been editedSERG726 - 06.01.20, 15:04

Added byfirmware Based on Beelink in OTA.zip format, for both versions of WiFi (installation through stock recovery, all user data and applications will continue)


Post has been editedRUS-05 - 08.01.20, 15:24

chados6 , You can say so

Install through what?