I do not remember under what circumstances, but something like that was.
Even the router reloaded.

Post has been editedandykha - 20.11.19, 23:53

The people who use smartyoutube, all the search works fine, only Lite works normally, in most cases, in most cases, falls out when choosing a video from the search results. Can anyone come across such? SMARTYOUTUBE versions tried different. Everywhere one result, firmware stock.

lime-urec,
I'm on a slave. I launch a voice search, then I press the results in the smartube and everything.

lime-urec, I put Full 4K (at least I and the TV in FullHD - I just like that you can enable the sound quality separately) - there were no such problems with the search. Quietly accommodation and simply letters, and voice input: happy:

Post has been editedMOnsTeR__ - 20.11.19, 10:03

WiFi antenna for ampaka 2.4 GHz is the most problematic version of the boxing discussed.
The simplest antenna for those who like to experiment.

The photo shows a long thin middle line, which comes from the Wi-Fi module (left lower corner) to a matching P-filter, in which there is no 1 concern. Then - something similar to a strip transformer (on the right above), ending with a short thick vibrator. There, there is a rudimentary strip of antenna for 5 GHz, which are not connected anywhere.
The alteration is reduced to the subformation at the end of the vibrator of the lambda length / 2 = 70mm. The idea is taken from ESP32 module lovers.
Result: The signal is clearly increasing. I have increased from -62dbm to -56 dBm. But there are bad news - speed as 2-3 Mbit, and remained! At the same time, at the same signal, the smartphone shows 12-16 Mbps. Apparently, the problem is in the software, the wretched driver or something else. On android, they do not even easily dig in the guts, hope for a new firmware. I have stock with all OTA updates.

RUS-05, The item "Picture in the picture" appeared in the settings>applications->Special access, but unfortunately it does not work. I trial Vimu and MX Player Pro. There are assumptions, what else to fix?

Post has been editedvodik7 - 20.11.19, 18:18

vodik7 , In the settings of the application, you also need to activate the corresponding item in MX

Post has been editedRUS-05 - 20.11.19, 18:25

RUS-05,
Point "Playing video / audio in PIP mode" no

And immediately another question
I have 2 TVs, he connected to the main TV 4 HDMI inputs, the picture after a couple of Sikund begins to be red or blue, as if the wire is already breathing. And on the other TV, all the rules, he is simpler and there only 1 HDMI input, it turns out in the standard HDMI wire?

Install a maze, or chrome this and not update


Post has been editedshornik15 - 20.11.19, 18:48

Not. 4/32 goes with both one and two modules. I have two for example.
Native cable immediately change to another, with him some problems.

And another question to all. Has anyone able to make the microphone on bluetooth? It does not work on the remote (from Mikula), nor with headphones

Snickersgt , More pictures and sound will not disappear? What permission to set up the console is worth?

Here someone in the subject not so long ago asked how to make the voice search results found for Youtube, opened in some of the Adfree versions - Smart YouTube or (AD) Vanced. I don't know about vanced, for the smartyoutube, the solution was found - adds extra. A program, the so-called Bridge, which in itself does not show anything, but simply redirects requests to YouTube on Smart.I'm not sure that this bridge will work normally with all the versions of Smartyoutube (you can try yourself), but at leasthereThis coupleWorks with each other without any problems.
1. I download both files on the link, honestly try to put ... they did not want to install it, but the presence of root rights makes everything easy: create, let's say, in System / App two folders - Smartyoutube and SmartyoutubeBridge - and copy downloaded apk -File. As always, check the rights RW-R - R--. Reboot ...
2. After overloading, YouTube and ATV Smart YouTube TV Bridge should appear in the overall list of applications. Both launches SMARTYOUTUBE (in our case, version 6.17.211 - see Screenshot)
The main focus is that the top number of voice search results - allegedly for YouTube - now must open in Smartyoutube. Well, the results from the lower row for Smart YouTube will naturally be opened in it.
If someone is already worth Smart YouTube or do not like third-party modes, you can try to put (if necessary, by copying the file in the System / App) only Bridge and check its compatibility with your version. Bridge itself - without Smart YouTube - it is meaningless.

(ADD) renewed the version a couple of timesSmart youtube- until 6.17.274 and 6.17.284, the sameBridgeWithout any problems, all requests will forward all requests (including voice search results from the top line) to the canonical version of YouTube and on them. From small "problems" only the color discrepancy between the one-time screensaver Bridge, fitted under the light blue tone of fashion 6.17.211, and the classic red colors of the new versions of Smart YouTube. It doesn't really annoy me, but if you suddenly start, replace one graphic file on another - work per minute.


Post has been editeddiman19 - 12.01.20, 22:27

And you can adjust the scale in the TWRP laid out, I don't know how to put it right? The fact is that on the old TV, even it has the 29th diagonal, the left part of the screen turns out to be partially hidden I do not see the folders as you have on the skin, And with a backup, it is not seen that the checkboxes are noted. The readability of the text of speech does not even go to the general picture to see.
A95X F2 with Soc Amlogic S905x2 (post rus-05 # 90419349)

Post has been editedfil0828 - 21.11.19, 07:27

There is no kindergarten, HDMI is always connected, complied with the power off in all devices, turn off the console is not enough, you need to turn off the TV.

Posted on 11/21/2019, 11:09:


After entering the data, we press the button back again to hide the keyboard, then one (two) times down and twice right.

No difference what remote. Mouse only turn off in front of these manipulations.

Codecs for replacement (Elimination of IPTV freezes) vendor_lib.zip. (2.57 MB)
Installation via TWRP, before installing, make a backup section of the vendor.

Post has been editeddiman19 - 21.11.19, 15:42

You do not quite rightly understood: putting in TWRPUniversal System.img.(Well, or, if you want, the backup section of the System from the folk firmware) over its section of the SYSTEM, you will change only it, and everything elsewill remain in place. Moreover, if you do not do wipe, all user programs and their settings will be saved.
If you need to change it on a vendor stock decoders, prone to friezes on IPTV, you can or copy them into a file marker on top of stock manually orChange them from TWRP(No matter, before or after the firmware System.img). Briefly: you do not need cable, everything you need sews fromtwrp.

Well, in general, I entered. Although the cable bought to sew through UBT, but toli cable did not approach something else that, in general, the firmware process never started (I tried all the USB sockets in the computer and the console in all combinations, with HDMI without it, let go of the button immediately and With a delay, in the overall cherished signal I did not hear).
Sewed through TWRP (system section firmware - VIPE cache and Dalvic - VENDOR firmware with codecs - Vipe cache and Dalvik - reboot into the system)
Everything started, the interface for me, with large icons (I'm a little blind), and everything would be fine, But here I do not find a voice search at all.
On the hands of the G20S remote control - by pressing the search button no reaction, the applications also disappeared voice search icons.
Voice Search Gulla Judging by the list of system applications has been cut
The method of substitution of the Velvet.apk file from the cap is probably not the case, since there is no directorysystem / priv-app / VelvetLike current

Tell me where to dig?

Helped video S.Technozone

Post has been editedfighter1 - 21.11.19, 23:09