Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
✱ Specifications
Communication standards:GSM, 3G Number of SIM cards:2 SIM SIM card format:Mini-SIM Screen diagonal:5.5 Screen resolution:480x960 Number of colors:16 million The pixel density, ppi:263 Display Type:IPS CPU:MTK6580M Cortex-A7 Number of Cores:4 Processor frequency:1.3 GHz Graphics processor:ARM Mali-400 MP2, 500MHz Inner memory : 8 GB RAM:1024 MB Memory Card Support:microSD 128 GB OTG:Do not support Camera:8.0Mp (SW) + 5.0Mp, diaphragm aperture of F / 2.0, LED flash, wide angle lens 80 ° Front-camera:5.0Mp (SW), the diaphragm aperture of F / 2.2, a wide angle lens of 70 ° Operating system:Android 8.1 Oreo Go Edition Wi-Fi:802.11 b / g / n GPS technology:A-GPS Fingerprint scanner:At the rear, while unlocking 0.1sek, scan angle 360 ​​° Bluetooth:4.0 FM tuner:there is Interfaces and Connections:microUSB, Audio 3.5 Sensors:Approximation lighting Battery:3300 mAh, not removable Sizes, mm:151 x 70.8 x 9.35 mm Weight, g:165
Photos (8 pieces)
WDrivers and Utilities
SP FlashTool The flash program for smart phones based on MTK.
WwR MTK The program works with ROM files (read from the device using the SP Flash Tool), based on MTK processors.
В®Rashr - Flash Tool The application for firmware and backup, restoring your device and kernel firmware without rebooting, fast and easy, without using a PC.
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.
I collected from the source to the firmware of the base cap.
Installation
Sew TVRP Fleshtulom or via fastboot. Go directly to TVRP, bypassing the system, otherwise TVRP replaced drain rekaveri. Sew Magisk-archive, clear the cache \ dalvik, reboot the system. Ruth will be obtained.
Push buttonScatter-loading . Select scatter file (MT6580_Android_scatter.txt) from the unpacked EEPROM;
Check that the selected modeDownload Only ;
Be sure to remove the check mark from the fieldPRELOADER . Sew it has only just in case the smartphone completely without signs of life!
Push buttonDownload ; Attention!If the box is checked on userdata, then the data of internal memory will be erased device.
Connect your smartphone to your PC off! Click "volume minus" and connect the USB; If done correctly, the bottom will run the firmware download bandwidth. In no case did not turn off the smartphone before the end of the firmware of the process!
According to the firmware download is finished, disconnect and smartphone.
Guys what I'm doing wrong? I decided to put Ruth. Downloaded flash tul put firewood, firmware download, extract replaced rekaveri the fact that the cap has stitched I go in there and rekaveri system ....
- System-less mode, boot image support required - Creating paths mkdir: can not create directory '/ su / bin': File exists mkdir: can not create directory '/ su / xbin': File exists mkdir: can not create directory '/ su / lib': File exists mkdir: can not create directory '/ su / etc': File exists mkdir: can not create directory '/su/su.d': File exists - Removing old files - Placing files rm: can not remove '/ su / bin / su': No such file or directory rm: can not remove '/ su / bin / daemonsu': No such file or directory rm: can not remove '/ su / bin / supolicy_wrapped': No such file or directory rm: can not remove '/su/lib/libsupol.so': No such file or directory rm: can not remove '/ su / bin / sukernel': No such file or directory
Hello! Somebody changed the display module on Doogee X60L? Already two modules on Alik ordered, and the Chinese do not display the version sent, in the end, instead of the image color bars