> Important!

We strongly recommend to familiarize withRules section "Android - devices"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Tecno Pouvoir 2 - Discussion | Smartphone, 6 "



Rep: (0)
DiscussionTecno Pouvoir 2 (LA7)
PictureTecno Pouvoir 2 (LA7)
Discussion пїЅ


Specifications
Common parameters

Year of release - 2018

mobile connection

Support for 3G networks - WCDMA: 900/2100, FDD-LTE Cat4
Support for HSPA / HSPA + networks
Support 2G networks - GSM: 900/1800
Support for 4G (LTE) networks - is
Frequency bands LTE - Band3 / 7/20

Screen

Screen size (inch) - 6 "
Screen resolution - 1440x720
The pixel density (ppi) - 268 ppi
Screen Manufacturing Technology - IPS
Display number of colors - 16.7 million

Housing and protection

Body material - plastic

System

Operating System - Android 8.1
Processor Manufacturer - MediaTek
Processor Model - MediaTek MT6739WA
The number of cores - 4
The frequency of the processor (GHz) - 1.28 GHz
Processor Configuration - 4x Cortex-A53 1.28 GHz
Technical process - 28 nm
Graphic Accelerator - Mali-400 MP2
The amount of RAM - 2 GB
The amount of internal memory - 16 GB
Memory card slot - is (universal SIM + SIM / SIM + microSD slot)
Types of supported memory cards - microSD, microSDHC, microSDXC
The maximum amount of memory card - 64 GB
Sensors - light sensor, proximity sensor, accelerometer
FM radio - there is

Main (rear) camera


The number of main (rear) cameras - 1
The number of pixels main chamber - 13 Mn
The aperture of the main chamber - 2
Autofocus main camera there
Flash Type - Dual LED
Shooting Modes and shooting functions technology in low light, bokeh effect, mode "Portrait"
video format - Full HD
video resolution and frame rate - 1920x1080
Front camera - 1
The number of megapixels front camera - 8 Mn
The aperture of the front camera - 2
Built-in flash - there
video resolution - 1920x1080

Communications

Version - Bluetooth 4.2
Wi-Fi standard - 802.11b, 802.11g, 802.11n
GLONASS - is
GPS - is
A-GPS - there is

Wired Interfaces

Interface - micro USB
Headphone Jack - Mini Jack 3.5 mm
OTG support - is

Additional Information

Components - USB cable, documentation, clip for removing the SIM card slot, power adapter
Biometric Protection - Fingerprint Scanner, Face Scanner

Nutrition

Battery Type - Li-Ion
battery capacity - 5000 mAh
Opening hours of standby time - 720 hours
Opening hours of talk time - 26 hours

Dimensions and weight

Width - 76.8 mm
Height - 159.8 mm
Thickness - 8.5 mm
Weight - 170 g

Photo
Attached Image
Attached Image




There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedLexx808 - 29.12.19, 23:54



Rep: (0)
Damn, I tried to put the TWRP, got bricks. This program Tecno_Flash_Tool beg normally but rekaveri remains native (came immediately after the firmware to boot). Then I decided to try Sp flash_tool, and similar Download-Agent ruined. Telephone signs of life gives no, it does not respond to button. Re-flash does not work
Attached Image

Someone will tell whether the phone can still revive?



Rep: (44)
snatex @ 26.06.20, 17:10*
This program Tecno_Flash_Tool beg normal but left his native rekaveri

All pravilno.Ztot flasher -servisny and sews it only runoff.
snatex @ 26.06.20, 17:10*
Then decided to try Sp flash_tool,

Which mode and that sewed? You can change the version fleshtula and try again raz.I connect to a computer and hold down the button for ten seconds off.
snatex @ 26.06.20, 17:10*
does not respond to buttons

Even fastbut or rekaveri not included?

Post has been editedLeonid-27 - 26.06.20, 23:09



Rep: (0)
Only sewing mode. SP fleshtul swore at da-agent. I tried this DA_SWSEC, and this MTK_AllInOne_DA. Then psihanul and disabled in the settings check lib DA match .. Phone ceased to be switched without entering any rekaveri nor fastbut. But Manager phone identifies the device. I remembered that the old body had to juggle the battery .. and tore the battery trail. Calmed down, soldered loop, but either korotnul or overheated. Now the computer does not see phone. Who will go for a new phone. Like this.



Rep: (6)
I have a similar trial
Lem help vklyuchaetsya not and never comes to hanging on emergency mtk usb port and nothing can be done

Post has been editedruslanich1 - 27.07.20, 20:49



Rep: (0)
xcm75 @ 10.10.19, 21:04*
Shit is normal and no root is cleaned through ADB. I can put the batch file for batch removal of all debris, however there and all of Google services are cut, plus dofiga what hardware such ZHPS.

It would not be bad, help you decide what you can endure without serious consequences, and that - no.



Rep: (19)
Hi all, given danyj smartphone motrvom form, namely, there is no reaction to pressing keys, not to be connected to charge (laptop determines) said that the updated apparently in the air and went out without any further signs of life. I can not dig up a working link to the firmware. If anyone has is to google share pliz



Rep: (14)
* dorian_grey86 , At Yandex has, inside the flasher there must be native and firmware update https://yadi.sk/d/jHVLQzAE7BzQ0g?w=1
If you still need



Rep: (19)
* Ilka00001 Thank you, but the problem is that the smart nivkakuyu not want to be sewn. Issues a connection error, though firewood normally, the computer determines. When the flasher was replaced on the other, an error that asks deciphering disconnect the battery (how to open it? To disable the battery?) On the cover latch or glued?



Rep: (5)
A neighbor asked for help. We had to roll back to the factory. Prior to this, insert the card, I format it on the request of a smart and moved to it all necessary. After rollback smart smart again to format it requires. So on it just what you need on a smart just to move. PC also requires formatnut. What to do?


Full version    

Help     rules

Time is now: 23/09/20, 22:11