All subsequent versions will be the topic cameraGeliosoftCamera2GeliosoftCamera2 version 3.7for photo Changes.
For recording in YUV sharpness lying in luminance channel and color channels can reduce color blur for the noise. Added contrast for curve circle. BB corrected and the focus for some phones.
The basic idea is that the camera on manual settings can be removed better, but each time they do not expose apply scenes. Each stage can be set up under certain conditions, and then only when it is necessary to choose. So this camera is more designed for those who want more control when shooting and understands the manual settings.
Before asking a question is better to read the description. After installation if you had the old version better clean up the data. I look forward to the test results and the continuation of the optimal settings.
Installation: unzip the zip, read the description and install apk as usual.
Loading:
geliosoftcamera2v3.70.zip(2.12 MB)
Loading:
geliosoftcamera2v3.61.zip(2.12 MB)
Loading:
geliosoftcamera2v3.60.zip(2.11 MB)
Loading:
geliosoftcamera2v3.54.zip(2.11 MB)
Loading:
geliosoftcamera2v3.53.zip(2.11 MB)
Loading:
geliosoftcamera2v3.40.zip(2.1 MB)
Description
The main screen.
Top left scene selections: "Auto", "the HDR", "Landscape", "Night", "Portrait", "Night Portrait", "Macro", "Sport". Scenes customized to your taste. Everyone can customize for yourself.
The following selection of continuous shooting. How many at a time to take pictures.
Timer 2 to 10 seconds. After shooting, the camera flashes on the timer flash. Flashing can be switched off when shooting at night. 2 sec. conveniently set when shooting with remote descent, you can see that there was a shot or to avoid shaking after pressing.
Also, a timer is convenient to use when the main selfie camera instead of the front.
Locking the white balance. Brings to the stage where the BB the right, blocking and shooting where the balance was not right. To facilitate the frame can be put in a white sheet or a palm for example.
Turn on the flash torch mode. Convenient to use with a lack of light or when shooting close-up, even in the sun.
Top-center of the status bar.
Show an increase. Done mixing, dilution of two fingers on the main screen or prescribed in the scene.
Horizontal and vertical tilt angle.
Focus in meters. If supported. Focus on the touch also works. Reset after shooting.
On right.
"Remove" button.
After clicking the lift button, the screen is locked and there is shooting. At this time, the phone is better not shake. Once unlocked, you can move your phone, and you can not remove the recording is in progress.
"Save" appears after recording. Then it can be removed or concealed chamber. To shoot, you can use the volume keys and the remote control.
Switching cameras.
You can select all available cameras on your phone settings also switch since each camera on your own. For mi9 available 8 cameras. 0-main. 1-front. 2-telephoto. 3-Shirikov. 4,5,6 and 7 - program camera may not operate stably.
The choice of settings.
Settings.
The settings are saved for each camera.
Photo settings
Resolution Photos
You can set different permissions for a photo with aspect ratio 4: 3 and 16: 9
Raw Resolution
Ask a picture resolution equal.
Save in RAW
RAW will be stored in the DNG files.
Ask focus.
"Continuous," "When shooting". On mi9 better "when shooting", which is focused in the moment of clicking on Remove. "
Quality JPG compression
Values ​​from 100 to 70.
Grid.
Disable or set the grid 3x3, 4x4.
Shutter sound
Turning on and off the shutter sound.
"JPG from YUV"
Shooting in YUV and clamping to JPG Some phones can give better results and work more stable.
in Exif Rotation
Prescribe exif turn in rotation. You might need for those who shoot vertically.
scenes settings.
You can adjust the scene to your liking, and then choose the main screen.
Aperture
It appears not those phones where there is a choice of the diaphragm.
The value for the curve
Default - the curve which is calculated in the phone. It can give a good result on those phones where the exposure is determined by the light areas. Also on Samsung phones, where the problem of the curve.
If "Auto" - the curve is automatically set based on the "average brightness". On some phones may not work. can be set to manual for full control. To do this, select the curve Log or circumference.
Adjustment takes place on the main screen of the engine displacement.
average brightness
It works only if the curve is set to "Auto". Specifies the average brightness of the image. Typically in the range of 110 - 130. For the night, you can put less. For large values ​​of "Zoom exposure 'to bet more.
Contrast.
Changes the contrast to the curves in Auto mode and Log. Usually 1-5 working values.
A series of curve
Log Select curve or circle, set the pitch curve, and the main screen to the initial value. After shooting we obtain 9 frames with different curve. This mode is useful for those who then merges the photos into your computer.
It allows you to choose the best vyriant, rather than spending time on the installation when taking the curve.
The minimum and maximum shutter iso.
In good lighting conditions, shooting is done at the minimum iso. With deteriorating light camera will keep a minimum speed and iso raise to the maximum value.
If the lighting still fall survey will be conducted at the maximum iso and shutter speed will increase. If the "minimum exposure" set the MAX. Shooting will take place with a minimum of ISO and shutter speed to mi9
It can go up to a few seconds. The same will happen if the "Maximum the iso" set to MinIso. When you use the mode which is a series of exposure can not be more than 1/2 since at longer exposures phone series does not remove.
Manual focus.
If "no", it is not used. In manual focus is chosen near the value of the focus.
An increase.
It allows you to set from 1 to 4 digital zoom. If you disable the squelch on mi9 left vertical band appears, you can hide the increase in 1.1
Face detection
It includes face detection mode and set the area for focus and exposure on the first face. The status bar on the main screen at the end of writing as individuals identified.
Squelch.
Use to Auto, MFNR, MINIMAL, FAST, OFF or HIGH QUALITY.
When set to Auto on, to iso MinIso * 2 worth OFF, then to MinIso * 8 used MINIMAL, above HIGH QUALITY. It is better to use Auto or OFF. When OFF can be a vertical bar to the left, where you can remove the zoom 1.1.
Also, at a minimum ISO HIGH QUALITY removes color noise and little soaps. Lack of HIGH QUALITY that colored spots may appear on plain surfaces.
MFNR - gluing of 9 frames. The highest quality, but the alignment yet, so only shoot static tripod. For normal operation, you need to set the value for the curve, when cars will be at 50.
When using MFNR better to set "minimum exposure" 1/2 or shorter, as the slower shutter speed is not running series. For "Maximum Iso" better set MinIso * 32
Raise the shutter speed.
Since mi9 exposure is considered to be on the light areas can be left at 1.0. For other phones for HDR effect have to put 1.5 or 2.0
When the frames are very bright and overlook the curve can not be obscure, it can be used on mi9. It is also possible to use for night shooting.
Sharpness type.
Use unsharp mask with a radius of 1 or 2 and contour sharpness.
The value of sharpness
Between 5 and 10 can be completely safe to use. 0 - sharpness is not used. When taking into YUV sharpness mode channel lying in brightness and color do not increase noise.
Blur.
When shooting mode allows blur YUV color channels to reduce color noise. 0 - blurring occurs. 1 - 10 with a larger operating value can save and smaller objects appear colored contours in color.
Saturation.
Value from 0 to 10. The black and white standard value of 5 offline processing. The values ​​6 and 7 is also working.
Change of size.
Reduces the size of photos in megapixels. For example, if shooting in 48mp, the installation will reduce the size of 2.0 to 24mp. 1 - size does not change.
Flash.
It works in flashlight mode. "Macro" and "Night Portrait" can be used on stage. It is possible to turn off the flashing timer for night shooting.
Optical stabilization.
On mi9 there is better not to change.
Recommendations for shooting.
On the day the pictures "Reduce exposure" is better to put 0.7 - 1.0 in order to reduce noise. For a night on the contrary 1.0 - 4.0 or more to the photo came out dark. For the scene "landscape" is better to register a manual focus to infinity.
For saturation is well suited even for 5 colors, you can pick up to 6-7. For night may decrease to 4. People tend to shoot better 5.
With a lack of light shoot at min. iso with a tripod. Also, when a tripod for static scenes short exposures can include gluing (MFNR) and sharpness longer.
All information on the survey is written in the exif in the comment box. Therefore we can use the information from there to adjust the scenes for specific shooting conditions.
Photo examples All subsequent versions will be in the chamber subject to a cap at the end ofGeliosoftCamera2GelioSoftVideo version 1.3video Version 1.3
Added curve "Filmic Log", changed its curve and is now available for the contrast it. The number of chambers increased to 8.
There is a choice of cameras. Recording is disabled with noise reduction and sharpness until there will be a free 100MB. There is information on the angles of inclination, manual focus, saturation, gain, white balance, white balance lock, exposure and focus. Selecting codecs for video and photo sources for sound recording. Audio recording in wav. Removal of flicker and switch off the stabilization. Different types of curve.
Installation: unzip the zip, read the description and install apk as usual.
Loading:
geliosoftvideov1.3.zip(1.74 MB)
Loading:
geliosoftvideov1.2.zip(1.63 MB)
Loading:
geliosoftvideov1.1.zip(1.62 MB)
Loading:
geliosoftvideov1.0.zip(1.62 MB)
Post has been editedGeliosoft - 10.10.20, 20:20