TP-LINK WDR3600 - Discussion [OpenWRT, DD-WRT, TP-Link, Gargoyle, etc.] | [WiFirouter, USBWIFI, Firmware] 300 MB / s (2.4 and 5 GHz), 5x1 GB / s, 2xUSB
SOLALEX1 @ 08/10/19, 18:27
GRENTAN @ 08/10/19, 15:09
Open-WRT cuts speed via wifi roughly twice
Cuts speed not firmware, but the presence of other WiFi points and the channel used. Still affected the width of the channel (20 or 40 MHz)
Open-WRT cuts speed via wifi roughly twice
Cuts speed not firmware, but the presence of other WiFi points and the channel used. Still affected the width of the channel (20 or 40 MHz)
It seems to me a person is not full of Bolon, explicitly in 15 minutes spent on the firmware, the presence of other points has not grown in geometric progression;)
By the way ..
For TP-Link WDR3600 VER.1.2
DD-WRT_06.08.19
DD-WRT_31.08.19
Oh and by the way ..
Who used .. What is the principal difference between Open and DD WRT? Locking interface ..
Post has been editedevenxen - 31.08.19, 15:46
For TP-Link WDR3600 VER.1.2
DD-WRT_06.08.19
DD-WRT_31.08.19
Oh and by the way ..
Who used .. What is the principal difference between Open and DD WRT? Locking interface ..
Post has been editedevenxen - 31.08.19, 15:46
evenxen As far as I know OpenWRT uses only open firewood, if you're all hides, then there is no assembly to this device. And DDWRT can also use blobs.I have version 1.1. Firmware should own, buy a router 4 years ago. Chances are you can and firmware update, but for now everything is working, I decided not to touch. And now the question. I want to pull up the hard drive to it, then to the music from your phone to run, kind of like in the phone player must support upnp. Prompt, I realize it is not MLM. And whether it is necessary to change the firmware?
SMIT1972 @ 12.07.19, 00:13
In principle, the device is not bad for the Internet into the house. But this is all.
1) WiFi 5GHz disappears periodically. It helps only reboot. I suffer with this from the very acquisition of (3 years). In TP, they answered that they need to change the region to the United States, the UK or something else. All this garbage. Does not help.
2) Cinema Watch from the disk or copy something (read, write) only for about 15-20 minutes. Then the disk disappears. After a few minutes, it seems magically. I thought about the problem with the disk, changed the disk - the same crap. I had to throw the idea to use the device as a repository of files available in 24/7 mode.
3) Support for the printer is also through stump a deck, so it is unparally.
So it turns out that I gave 5tr for a banal router with gigabit ports to which the red price is 2.5.
1) WiFi 5GHz disappears periodically. It helps only reboot. I suffer with this from the very acquisition of (3 years). In TP, they answered that they need to change the region to the United States, the UK or something else. All this garbage. Does not help.
2) Cinema Watch from the disk or copy something (read, write) only for about 15-20 minutes. Then the disk disappears. After a few minutes, it seems magically. I thought about the problem with the disk, changed the disk - the same crap. I had to throw the idea to use the device as a repository of files available in 24/7 mode.
3) Support for the printer is also through stump a deck, so it is unparally.
So it turns out that I gave 5tr for a banal router with gigabit ports to which the red price is 2.5.
There was the same problem, glued to the chip radiator and everything decided. Five years is normal, firmware factory.
Tell me who in the topic will be firmware from this router to TL-WDR4300?
https: //www.tp-link.co...ifi-router/tl-wdr4300/
I want to solve the problem, the speed of WiFi cuts into 2A times.
Post has been editedIegudil - 11.09.19, 19:22
https: //www.tp-link.co...ifi-router/tl-wdr4300/
I want to solve the problem, the speed of WiFi cuts into 2A times.
Post has been editedIegudil - 11.09.19, 19:22
Imegudil @ 09/11/19, 18:20
Tell me who in the topic will be firmware from this router to TL-WDR4300?
https: //www.tp-link.co...ifi-router/tl-wdr4300/
I want to solve the problem, the speed of WiFi cuts into 2A times.
https: //www.tp-link.co...ifi-router/tl-wdr4300/
I want to solve the problem, the speed of WiFi cuts into 2A times.
It is suitable .. also on MIPS architecture built.
DD-WRT tried?
evenxen , I tried OpenWrt Attitude Adjustment 12.09 / Luci 0.11.1 Release (0.11.1) for TL-WDR3500 / 3600 / 43xx models, , when distributing Wi-Fi, cuts the speed in half.
Imegudil @ 09/19/19, 23:29
When distributing Wi-Fi, it cuts the speed in half.
And what should be speed?
For the purity of the experiment in the field it is necessary to check where there are no other wifi points for a kilometer;)
Imegudil @ 09/19/19, 23:29
... when distributing Wi-Fi, cuts the speed in half.
GRENTAN @ 08/10/19, 15:09
... Open-WRT cuts speed via WiFi roughly twice. Is it normal for this firmware or what are there any other configuration?
Try to enable the parameternoscan: OpenWRT / LEDE - Alternative Firmware (Post Salexa # 87967616)
Previously check whether the 40MHz channel width is enabled in Network ->Wireless ->Edit ->General Setup ->Operating Frequency ->Width
Post has been editedsalexa - 01.10.19, 20:32
Reason for editing: Link to a more detailed post
Hello.
I already have this device for years 5. Everyone suits. But recently there has been a problem. 2.4 GHZ began to fall off. And there is a connection, but the Internet does not pass. After 5 GHz I connect, I do a restart and works further. The firmware was the last original, lowered, but did not help.
Who can that will advise?
Thank you in advance.
I already have this device for years 5. Everyone suits. But recently there has been a problem. 2.4 GHZ began to fall off. And there is a connection, but the Internet does not pass. After 5 GHz I connect, I do a restart and works further. The firmware was the last original, lowered, but did not help.
Who can that will advise?
Thank you in advance.
Dimoncik I have a similar problem. Previously, someone wrote that the problem is related to overheating. You need to disassemble and make a normal cooling system.Smoukers @ 10/30/19, 14:30
I have a similar problem.
Have you tried to make cooling? And it would be necessary to know exactly what module it is necessary.
Just if one module is responsible for WiFi by 2.4 and 5, then why 5 does not disappear?
Vovan26_ @ 10/30/19, 15:48
Processor 2.4 and 5GHz!
Then explain how it may be that the processor on both frequencies, but is only 2.4 stuck?
5GHz works steadily constantly.
Post has been editedDimoncik - 30.10.19, 18:39
Dimoncik, https://openwrt.org/toh/tp-link/tl-wdr3600
Put the radiator on 2GHz.
Post has been editedvovan26_ - 30.10.19, 19:21
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement