DiscussionPrestigio MultiPad Wize 3161 3G
Prestigio MultiPad Wize 3161 3G, PMT3161_3G_C_CIS
Description | Discussion пїЅ



There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedMr.Camar - 14.08.20, 08:59

This requires a root and root conductor (or conductor es)
Go to the folder system and are looking for a text file build.prop
Next, we change


That's it

Thanks to the userPuBas
Page with correctionshere

Post has been editedMr.Camar - 21.01.19, 16:25

There was a small thing. How to get root?

List of reviews:
the number of comments - 1
Reviewed by mihail.metod

Post has been editedMr.Camar - 10.02.19, 17:39

Guys, do not apologize to your topic (not found its model across the entire site). Tell me please, PRESTIGIO Wize 3151 3G is the same model or all the same differs significantly from the model that is described in the topic? Compared the iron is almost the same: the only difference in the volume of built-in memory (I have a 16Gig) and video core (I like the Mali-400, but in your model Mali-400 MP). so no longer I noticed the difference (mine produced began in August last year).

Post has been editedleon111_09 - 29.01.19, 02:23

leon111_09 Yes, probably only in the amount of internal memory

Old hat threads

Recently I picked up for the baby. I do not remember where, but read that mixed up the volume buttons. And there is. Especially in the store a few pieces of checked out, and then another 3171. There's the same problem ...

More I noticed a glitch. If the settings in the application to put the lock, and then turn it on in the application itself, the lock is not turned off (via a long press of a button back, as required by the instruction). Is observed when blocking youtube and chromium. Helps only restart, otherwise no other app does not include ...

Post has been editedmihail.metod - 06.02.19, 07:33

mihail.metod Devices from Prestigio always glyuknutye, but that's it! What is the price and quality.

After a week of using it should be noted that no significant problems: a good battery, the screen is large enough, a good responsiveness of the system, although not ideal. If not for minor bugs, which are stated above, in general, no major complaints. Child at all happy with everything.

To put the tablet in fastboot mode, you need to do the following:

On the tablet we go to the settings, there About the tablet, we tap many times on the Build number until it says that it’s become a developer.
Go to the menu For developers. Turn on the switch at the top. Turn on USB debugging. Check the box "Always allow debugging from this computer", click OK.

Download Platform-tools (adb & fastboot)ADB and all that can be done with it (Post Displax # 76594511)

Next, run the cmd console using the "cd" command, going to the folder with adb & fastboot, execute the commands:

The tablet restarts in fastboot mode and then we execute the commands you need.

Post has been editedagranbox - 15.03.19, 04:54

To make sure that the tablet automatically turns on when power is supplied (by default, charging is just going on), you need to do the following:

Go to fastboot mode and run the command:

The King Root program did not help me, so I had to research to get root rights.

To get root privileges, you must do the following steps:

Perform actions frominstructions for transferring the device to fastboot mode, but do not reboot the device in this mode yet.

Find the firmware on your device, pull boot.img from it, copy the file to the device.
Install Magisk Manager.apk on your deviceВ® Magisk - The Universal Systemless Interface
Launch Magisk Manager Where it says Magisk “Not installed”, click “Install” and select “Patch the kernel image (boot.img)” and specify your “boot.img”, copy patched_boot.img received on the computer to the folder with “Platform-tools (adb & fastboot). "
Here is the file prepared by me:patched_boot.img(9.14 MB)
Next, start the cmd console using the "cd" command, going to the folder with adb & fastboot, execute the commands:
When you turn on the device for the first time, it will erase all data from the device and you will need to re-configure Android. After setup, install Magisk Manager.apk again and now you must have root privileges.
And now the device will give an error message every time it is turned onThe message does not interfere with further loading of the device and will disappear if you block the bootloader, but then root rights will disappear.
Later I prepared a patched filelk-nowarning.zip(581.77 KB)
which removes this message, to install it you need to reboot in fastboot mode (you can do everything right away when the bootloader is unlocked) and execute the following commands:
The command to block the bootloader (root privileges will be lost):
If you update the firmware, then you probably have to repeat all these steps to restore root rights.

Post has been editedagranbox - 17.03.19, 03:49

To disable ads when loading a tablet, you need root rights.

The easiest way is to delete the file /system/media/bootanimation.zip (animation when you turn on, containing ads)
If you delete it, then the animation will be replaced by the standard one (iridescent Android inscription).

The shutdown animation is stored in the file: /system/media/shutanimation.zip

Download Platform-tools (adb & fastboot)ADB and all that can be done with it (Post Displax # 76594511), enable developer mode and enable USB debugging.
We mount the system section for recording to make changes.

At the time this command is executed, a request for granting root rights will be displayed on the tablet, it must be enabled.
Removing animation at boot and replacing it with standard Android:
Delete animation on shutdown and replace it with standard Android:
Download files with animation on PC:
After editing them, you can fill them back into the device:

You can read more about editing animation files here:Bootanimation

Post has been editedagranbox - 15.03.19, 04:53

agranbox,
Please tell me if there is Android 8.1 Go for this device?

Not in the know, most likely not.

agranbox,
heated display on the left side, even with little or no load (setup and removal of standard applications, etc.) that it can be, can display a loop? I can not find the system board layout to determine which is the left side, right next to the frame on the left hot potsentru relatively Top Bottom

Can you tell me?

All ku.Prinesli me this unit, you forget all the data Google account and resetnuli. To say that they are great - nothing to say. But here is now to get around? I tried through the most popular security holes, by type - through extreme. challenges, but all smeared. Maybe, who knows? ;)

maksoncheg97 So easy to get around probably will not work, erase data via rekaveri have