Before you close the firmware, take into account:
1. This firmware will delete all your personal data on the TV and return it to the state, "" out of the box '. "
2. We are not responsible for problems occurring due to a breach by you of firmware instructions
3. Do not turn off the TV during the firmware until the main menu appears.
4. We recommend not to transfer the firmware to third parties, as this file was sent specifically for your model, taking into account the date of issue and the serial number.
When using this file for any other TV, you may experience problems because of which will need to appeal to the service center.
INSTRUCTIONS:
1. Download the file to your computer.
2. Rename the file to "" Mstarupgrade ""
3. Copy the file to the root directory (not in a folder, just in the main directory) flash drive with the FAT32 file system.
4. Plug the drive into the USB port of the TV off (at the bottom of the TV's light is red). Previously, remove all the other drives or wireless modules \ device.
5. Hold down the joystick button to turn the power button on the TV package (not on the remote) for 5-10 seconds, until the image update process on the TV screen.
6. Do not remove the USB flash drive to the main menu appears.
7. Wait for the update process without disconnecting the TV from the mains and without removing the drive.
If the TV does not respond to the software perform all actions with the other flash drive and try to reconnect the drive to the other USB port (if available) on your TV.
After installing the firmware, please notify us at:
[email protected] whether solved all the problems that have been observed in the TV.