traveler-z ,
Maybe my information will help you:
Teyes Spro - Discussion (post savelovav # 87031533)
Why all the SmartLock advise for me is not clear. This function refers to the unlocking of the screen and to pair the Bluetooth devices has nothing to do. It uses already conjugate devices for unlocking the screen and not what Bluetooth device does not block, there is no such functional. The screen lock is turned off programmatically on the guinea for driving safety.

I agree, yes I was adjusted by a familiar electrician, the quality of the chamber's staff is of course shit complete, but at least something is visible.

bart_hs , all right. This is a conflict window with notifications in the status bar. Therefore, they were cut out and there are no them on stocks. The fixes use a stable system interface with notifications and icons in a darkened status bar. But he makes the right upper SS2 window buggy. Therefore, the Chinese abandoned the firmware with two lanemers from the CPO and CC2. Previously, a couple of such tests was, but they did not go to the light as described above the reason. Nevertheless, Fix was made for the rest of the Lunera.

Posted on 16/07/2019, 20:38:

Savelovav This is a spoiled phone. Ktoto wrote that it helps and all became another advise)

And you did everything right?







Post has been editedKС‘niG - 08.09.19, 15:07

And when activating the microphone there are no movements?
And the built-in normally works?

Most likely after rebooting ...

It is the multimedia buttons, FM, Trek + -, etc. In Sportage under GU, I did not find in the settings. On the steering wheel all buttons work.

Hello everyone! I did not find convincing answers ((
Installed SPRO 4/64 (May Firmware)
Auto Ford Focus 2 2008 (Hatchback) CAN bus tires.
There were questions:
1. The video recorder X5 lives his life (that is, turn off the engine, you close the car, go) And the registrar continues to shoot 30-45 minutes (5 min files)
Although in the settings of the GU, I set off the GU (not to go to sleep after the ignition off)
On the DVR from above on the left date and time how to fix them? (they are not right)
2. Video from the rear view camera does not look exactly in the middle (there is an image offset by 25 cm. Ivlevo) - Yes, I understand that it is not installed in the center of the car behind, but how can you turn it or send it to the center smooth Watched?
(By the way, when turning the steering wheel, the strips do not move, is it because of the lack of CAN? Or did I not hear something wrong? I can't hear the column (the only sometimes for a moment the picture was twisted)

Thanks in advance for the answers.

mid1977 ,
I think here 2 options, or this speed of the network (most likely, because Simka is not installed, therefore it writes any nastiness), or the display of temperature overboard (if the canbus is installed, in Rio 4 Kan tire is almost fiction, then possibly from For this, such numbers) Try to disable the whole thing in the settings.

Post has been edited_Pechalniy - 16.07.19, 23:18

Yes, they sailed, then why the wires are thrown into the SPRO with an output for a microphone and also put it. Maybe it's generally in software? Who has a firmware CC2 on SPRO CHE by microphone? Does not work?

g'oldman
Maybe it's in the firmware at all, those who do not work micro on SPRO

sashok140836 , I have the last CC2 dated 09.07.19. Microphone is not working. I bought my head in February, came then with stock March firmware

Yes, but I was still cut into the Quacket of the extra lace on 2 Sims, most likely the Chinese as always confused with Pins, no matter.

g'oldman ,
I have suspicion that the external microphone can be activated by the program, as well as cameras.
While the command is not a pledge on the command, it does not activate the camera input and does not show the camera. The same can be with a microphone, provided that it is correctly planted on the board.

Nobody tried to connect the bluetooth microphone to this gu, and in general there are such? Maybe it will save everyone ...

Post has been editedSlyusarchuk. - 17.07.19, 05:26

mid1977 , Display settings. The lowest item is disabled.

SlyUSARCHUK,
I doubt that it is possible to do this, even if it happens because I have not met.

ATTENTION: Currently (07/17/19), this Fix was not checked on systems with a connected video recorder (DVR, ADAS).
There is a possibility that after installing the fix, the registrar will stop launching the record itself and set the time.
Request for people who have a registrar and the ability to check the performance of fixes:Test the work of the Fix and write me in a personal .



Fix:DVR_FIX_NOTOASTMESSAGE_09.07.19.zip.(7.83 MB)


It is determined as well as all other fixes.

Post has been editeddrerix - 21.07.19, 19:31

Slyusarchuk. ,
Probably the main feature do you need a Canbus Is any information about the machine (gasoline consumption, temperature, adjusting the standard alarm, rear chamber and partctrons displayed in gu or on tidy, etc.). This shows that there is a CAN tire wire in the standard GU connector.
The display of dynamic lines depends on the presence of steering position sensors in the machine. If you have nothing to turn them in the chamber will not. Again, this information processes CANBUS and displays in the GU.

Friends Tell me why the name of the contact is not defined with an incoming call? Only the number , phone book is loaded and saved with the names, and at the incoming call I try to press the button on the steering wheel with a raised tube, it will be connected , it is necessary to press the green circle on the screen, then it is not very convenient to be distracted , are all so? The last firmware, I tried the June the same trouble.