Yes, and more, long chose this cover, worn out, it turns out there are several models that interested me (they turned out to be as much as 3 types): two models with remote control from the side and one model with the side buttons. Those who side with the remote control, one with vayfay, the other - no. Which with vayfay- under it there is an application, and can be controlled by it, as it is a function of air freshener. So I chose between the two. As a result, in his home town I found them at a price lower than Ali, given that Ali I need to take through an intermediary in Moscow. As a result, a side panel cover and without vayf (as pictured in the cap threads) cost $ 207 (plus-year warranty).
Ps. But a colleague and found a description of themselves:Smart-Device Xiaomi - Purchase (Post KD75 # 74534257)

Post has been editedmcroff - 23.08.19, 00:14

The first step is to ring heating element. If all the rules that check the power supply to it. If all the rules that refer to the thermocouple (resistance change upon heating if there is a conventional thermistor)

It's all good but there all the boards are filled with resin. Maybe someone knows a workshop in Moscow, who are engaged in repair of these devices?

If someone looks at the toilet of this beast, just perfect AM.PM Awe, as a mother posed.
PS. If there is a topic curator, mb, bring about the Old appropriate "thrones" in the hat? The very long sought in their time.

Post has been editedemerGator - 01.10.19, 16:03

Came socket Livolo, came as a native, it looks great!

mcroff but as it powered? Stroebe wall, or installation?

emerGator , For installation. Pinout made of polyethylene per bachek drain valve and immediately provided, and omitting the cap.

Hello.
Stopped working body sensor shall operate, most likely heat when landing on the cover.
Seen on YouTube that has to operate even if you make the hand.
Brown sensor is a rectangle with dimensions of 1 * 2 * 0.3 cm, 3 contact wires, about 50 cm long, 3 pin plug is connected to the control board. All the filled resin. Photos will put later.
Sometimes triggered 1 time immediately after turning off / on (the button on the home plug).
Help the link where you can buy like.
The device worked for about 10 months without any complaints.
Thank you in advance.

PS Removed resin, photo attached. At microchip marking like MA33?

Post has been editedara01 - 04.10.19, 04:24

It is impossible to raise the photos :-(

emerGator,
Or you can put pictures? Just online AP.MP distance between fasteners 180, and smart cover a maximum of 178. It normally stood, did not have to fret?

malganis87 There is only a photo with the repair stage

* EmerGator,
Thank! : Thank_you: A great option. And do not tell, how to hide the filter and connect a hose?

Post has been editedmalganis87 - 08.10.19, 10:28

malganis87 , Especially not hide it on the left side, but the "throne" of his hiding

Custom firmware is? Rutanut really?)))

dlumv,
Thank you, and can connect the place itself take a picture. Just do not understand what to do with it unwieldy white filter. You're under a separate toilet vodorozetku do?

And is there in that rim the function of air purification, deodorization type?

sartreek Is, but in a different version of the cover, where there is a connection to the phone on vayfay.

I would like to understand if there is a removable filter and how it is changing ...

and whether one of the lucky owners lay out the exact size?
not only the length / width and rounding begins and where?

Today was in the shop attached to the toilet seat AM.PM Awe C111738WH.



Post has been editedmusicmarkelov - 15.11.19, 20:38