Lenovo IdeaPad 330-15IGM - Discussion
Windows 10 | 15.6 "| Intel Pentium 4415U | 2.0 | 8.0GB
Windows 10 пїЅ | Windows 8-8.1 пїЅ | Windows RT and software пїЅ | Windows 7 пїЅ | Android | Remix OS пїЅ | Linux on tablets пїЅ | Change the operating system пїЅ | Search programs пїЅ | Antivirus пїЅ | Ambulance tablet owners пїЅ | Ambulance laptop owners пїЅ | IT smoker пїЅ | Operating systems and software

Topic Curator: Topic with no curator

Post has been editedWinSSLioN - 30.08.20, 23:05

Audit

81D100HJRA - Screen 15.6 "(1366x768) HD, matte / Intel Pentium Silver N5000 (1.1 - 2.7 GHz) / RAM 4GB / HDD 500 GB / Intel UHD Graphics 605
81D100HKRA - Screen 15.6 "(1920x1080) Full HD, matte / Intel Pentium Silver N5000 (1.1 - 2.7 GHz) / RAM 4GB / HDD 500 GB / Intel UHD Graphics 605
81D100HQRA - Screen 15.6 "(1366x768) HD, matte / Intel Pentium Silver N5000 (1.1 - 2.7 GHz) / RAM 8 GB / SSD 128 GB / Intel UHD Graphics 605
81D10091RA - Screen 15.6 "(1920x1080) Full HD, matte / Intel Pentium Silver N5000 (1.1 - 2.7 GHz) / RAM 8 GB / SSD 256GB / Intel UHD Graphics 605
81D100HMRA - Screen 15.6 "(1920x1080) Full HD, matte / Intel Pentium Silver N5000 (1.1 - 2.7 GHz) / RAM 4GB / HDD 1 TB / Intel UHD Graphics 605
81D100HHRA - Screen 15.6 "(1366x768) WXGA HD, matte / Intel Celeron N4000 (1.1 - 2.6 GHz) / RAM 4GB / SSD 128 GB / Intel UHD Graphics 600
81D100HPRA - Screen 15.6 "(1920x1080) Full HD, matte / Intel Pentium Silver N5000 (1.1 - 2.7 GHz) / RAM 4GB / SSD 128 GB / Intel UHD Graphics 605
81D100HARA - Screen 15.6 "(1920x1080) Full HD, matte / Intel Pentium Silver N5000 (1.1 - 2.7 GHz) / RAM 4GB / HDD 500 GB / Intel UHD Graphics 605
81D100MWRA - Screen 15.6 "(1366x768) HD, Matte / Intel Pentium Silver N5000 (1.1 - 2.7 GHz) / RAM 4GB / HDD 500GB / AMD Radeon 530 2 GB
81D100HBRA - Screen 15.6 "(1920x1080) Full HD, matte / Intel Pentium Silver N5000 (1.1 - 2.7 GHz) / RAM 4GB / HDD 500 GB / Intel UHD Graphics 605
81D100M1RA - Screen 15.6 "(1366x768) HD, Matte / Intel Celeron N4000 (1.1 - 2.6 GHz) / RAM 4GB / SSD 128GB / AMD Radeon 530 2 GB
81D100Q5RA - Screen 15.6 "TN (1366x768) WXGA HD, matte / Intel Celeron N4000 (1.1 - 2.6 GHz) / RAM 4GB / HDD 1TB / AMD Radeon 530 2 GB
81D100K9RA - Screen 15.6 "(1366x768) HD, matte / Intel Celeron N4000 (1.1 - 2.6 GHz) / RAM 4GB / SSD 128 GB / Intel UHD Graphics 600

Post has been editedWinSSLioN - 08.12.19, 12:11

Zhene4ka74 Official drivers are not suitable? Kind of like the article was to install the drivers under Win7

In case of difficulties, you can find the driver through the Driver Pack Solution

1.kirill,
You can link to the article?
The problem is not even in the drivers, but the fact that when installing Win7 goes into the blue screen ...

Zhene4ka74 here> http: // lenovremservice ... ows-na-noutbuk-lenovo /
Even the video is! And so ... I advise you to put not with the stick, and the disc (less likely to fly in a blue screen)

Lord, tell me whether to take this miracle of engineering technology for work or school (work mainly scientific, doing all sorts of testik (jupyter) Peel prilozhuhi to visual studio)

pcgames 1 For office the most it ... something like Photoshop or Illustrator graphics editors drawn correctly

To work in Visual Studio go, but will sometimes be quite hang

Zhene4ka74, on the Lenovo site and Intel driver website only under Win10, most likely they do not exist. Defeating the blue screen of death and failed when installing Win7. When you add USB3 drivers in the distribution of Windows and ends with a blue screen. When replacing boot.wim instal.wim files from Win10 driver requests and further business is not. Tried distribution replaced with files from Win10 to rutrekere, installation takes place, the files are copied, but after the restart the same blue screen of death.
In general, I think that is a question for the manufacturer why they have such the BIOS, which does not go installation. But does it make sense to put Windows 7, if there are no drivers for it? I understand from the 10's wood it will not be able to feed.

The situation is this, the installation proceeds normally until the first reboot, when you try to boot crashes blue screen with an error 0x000000A5 - not fully bios acpi compliant, when you try to boot into safe mode, leaving at the same BSOD on loading file disk.sys
Even when you try to boot from the disc Live 7 or 8 takes off the same BSOD 0x000000A5 - not fully bios acpi compliant. BIOS 7XCN20WW version of 04.09.2018. OnLenovo Onlinejust the same - BIOS Update for Windows 10 (64-bit) - 330-14IGM, 330-15IGM 7XCN25WW 03 Sep 2018- no other.
Write that Lenovo laptops have a way to fix the error 0X000000A5, - In the BIOS tab Save setting to deliver optimized for Windows 7, and then click on the label Load default settings (Load Defaults). But this is no bios points Optimized for Windows 7. It seems that this beech 7 does not install?

Post has been editedkjerom - 19.11.18, 22:45

kjerom, also update the BIOS to version 7XCN25WW through Life CD 10's and nothing has helped. The BIOS is like loading default settings for previous systems, but for Windows 7 as well as for XP is not good there, the same error. Maybe there really is no ACPI table?
TabExit there is OS Optimized Defaults if it is Enabled , The parameters will be set for Win8 64 bit and later, if Disabled , Then the idea to previous written at a legacy support mode. When selecting and pressing Enter on Load Default Settings loading default settings. But that Toshiba previous manipulations do not give anything, a blue screen with an error 0x000000A5 and remains.
I also read a little internet and disable all tabSecurity . Tab Boot I Boot mode - Legacy Support, Boot Priority - Legacy First, USB boot - Enabled.
In general, so far no manipulation helped not install Windows 7 x64.

Post has been editedAlecksey991 - 19.11.18, 23:37

I tried here on this method - but also zero (and tried to put on GPT and MBR)
"The first step is to put the BIOS OS Optimized Defaults - Other OS
then in the Boot menu - Boot mode - Legacy Support
Boot priority - Legacy First
When you start the notebook FN + F12 and select the installation device (I had a flash drive)
after booting start the installation according to the instructions converted a drive in the MBR:
Boot from the installation disc of Windows 7
- Press the Shift + (+ Fn) F10 - open the command prompt.
- Run the command line command-line utility for working with disks, partitions, and volumes in Windows. - diskpart
- View a list of drives to find the one with which we must work. - list disk
- Select the desired disc. - select disk 0
- Remove the drive from the other sections. - clean
- Convert GPT disk to MBR. - convert mbr
- Exit the Diskpart - exit
Files successfully copied and went to restart, here are having problems with the Windows logo in the care system reboot, I entered the BIOS and the Exit tab, click Load Default Settings, preserved, rebooted and installation prodolzhilas.Dalee all install and run without any problems. "

Post has been editedkjerom - 20.11.18, 11:20

Usual integrating the USB 3.0 driver in win7 distributions does not help.
Tried to install one of Frankenstein assembly, in which the loader taken from Win10 (during installation connected by a USB mouse works and the touchpad is not present), as well as to integrate different drivers, including the Intel I2C (v1.2.2.1008 & v30.61.1519 .07 x64). Hard disk installer sees breaks it, something currently set, but after the restart or when the falls in a blue screen, or simply reloaded without screens.
And that legacy is that UEFI.
Who cares - the assembly of the AG, it is easy to find.

It seems like a dozen - only a working history at the moment. Given the fact that in the BIOS, unlike older models is not possible to switch to a USB2.0 (precisely because of this, the installer without manipulation does not see the hard drive), Lenovo has not left us a choice and it is not going to return.

Does anyone have a problem with the touchpad? Pressing any button stops working, and when released, the runs again.

No one was able to put the Win7?

Maybe look for an older BIOS to support sevens?

Post has been editedavkiev - 08.12.18, 13:34

How did the machine?
There are weaknesses (for study, the code works)?

And could someone upload on this machine something to work with HHD, for example, Acronis Disc Director or elementary MHDD?

Aunt my daughter presented such a miracle for the New Year (and left back for 1000 km, where he bought). Aunt only classmates (through the Yandex browser), no longer knows anything and does not use. On the second day began to constantly fall out the blue screen of death (10-15 minutes after loading). There are no viruses (I checked everything that you can, and until the utility works, no reboots occurs). The BIOS settings on the standard dropped, when trying to roll back the system to factory installations, suggests that all programs from Lenovo will be demolished and they will have to search and put it manually, and there was no disc included. What can be done?

krupa13, to start to find out the error code would be nice, but look a memory dump.

Here it is impossible to switch the controller in Native SATA (IDE), because no MHDD, Victoria or the screw will not see. Acronis has to but because the latest versions with ACHI enabled.

Hello people, who managed to put some sort of distro linux? I would like to take this laptop for Linux, so I think it makes sense? I 330 -15ARR, on that I did not succeed, except win10. I did all manipulations and secureboot cut down and BIOS emulation and include uefi left and gpt mbr and when recording to a USB flash drive, not in what does not. Maybe my hands from the wrong place. Unsubscribe one out.

e67 On this model to get up without problems
And I advise you to try to do here in this post:Jumper EZbook Pro - Discussion (Post ser100 # 62989808)