I can not find where to adjust the screen size

How to solve the problem with the mouse when scrolling the list down? Version 2/16.

We are talking about the standards of Zhdmay, they are connected to a chemny one taken 5 years ago with a standard 1.1, etc.

Sergo_PnL , I had a kind of creak kodi how to install?

1. InstallReassignment + keys_V_1.12.2_Premium.apk(6.37 MB)

2. Go to the app if asks the right, we give. Next, we make an active first line "Service Active";
3. Turn on the mouse mode, click on plus in the lower right corner. Choose a "short and long press".
For example, we put on the "Back" button, "long pressing" put a daw - 0.5s, action - "recent applications".
You can put naturally not the back button, but on any button that you like (for this at the end of the list there is a "Other" button).
It is possible and not for a long press, and select a button that is not in the list, for example, to put the output of the latest applications simply on the number "8" of the console.
Switching by applications buttons "up", "down" on the remote control. Delete - button "Back with a cross" on the remote control on the keyboard, where the numbers are. There is a moment that when one application was deleted and you want another immediately, you need to click the "Down" button or "up" on the remote control. To be better clear, after removal, you still have an empty place, and you need to go to the application that needs to be deleted.
To delete all applications at once, you need to press "the latest applications" to "recent applications" on the "Recent Applications" on the remote. Turn on the mouse and click there, everything is cleared.

On AIR Mouse Vontar G10 Long click did not work, so I put it on a combination (in a plus) - double click, "Menu" button, the action "Recent applications".
By double clicking on the "Menu" button, the panel (three horizontal sticks) carries out the application window with applications. Deleting applications on the DEL button. Of course, on "Clear everything" go through a much more convenient way.

Bonus - How to Share the AIR Mouse screen.
We go into the "Recent Applications", press for a long time "OK" on the console on the appendix, there are two frames on the sides, pull the mouse in the right side. Another application we have on the other side, we work with both applications, YouTube is so twist, you can climb the Internet and watch videos.


Post has been editedVasily_5 - 27.01.19, 15:20

Recently running applications on X96 MAX

Immediately make a reservation, with my native PO, third-party status bars and na-bars are not a panacea. For: You need to switch the console to the mouse mode, slide to the bottom of the screen, the left / right "catch" buttons in the focus button responsible for calling the running applications, click the mouse, then already in the list that appears, switch the remote control to normal mode and only then you can control Background applications.

It is much more convenient to use the program for reassigning buttons on the remote control, for examplethis. Just need:
1. Run the utility
2. Activate the service
3. For example, long press buttonHOME to appoint>Select from the list Recent Apps. , confirm the change.

The process itself:
Being on the desktop, or in some program
• Click keyHouse
• RunRecent Application Manager
• Up / down buttons, go through the windows with programs
• ButtonDelete Located on the right under the medianefok block, close the desired (unnecessary :))

Oops, koss7777 You do not have time for you. While wrote, you already laid out your manual :)

Post has been editedserge_kononoff - 27.01.19, 17:21

Now on the hands of M96X. Does it make sense to go to this box if mostly are used to view YouTube, HD VideoBox and television channels in applications?

koss7777 ,
I strongly recommend this to do for those who use the remittance when entering the digits, and not a virtual keyboard.

serge_kononoff
For those who did on my video instructions on the buttons and the frequencies of AFR are tied, it is naturally only for example - all the buttons of the console can be used)

Do not squirt, I know what you mean. There is a binding only in SPMC, and here globally

Yes, the meaning is the same - who uses these buttons (or for frequencies, or for entering numbers), let it choose others or a combination of double pressing, the choice is.

Sanek8 X96max (S905x2) [Android] (Post Anpaza # 80969323)

The other day I was stitched from an SD card on ATV. WerenuancesWith TWRP setting for backup of stock.
As it turned out, the best use of custom recovery, is the launch of the so-called SD"Attached"TWRP (A laPortableon PC).

1. Img file.With TWRP from Camrad sasvlad You should put in the root of the memory card
2. Disable the device from the network
3. Insert sd in a slot
4A.. Click the "Recovery Mode" button in the receiver AV-jack
4b. Continuing to hold the button Connect the TV box to the network.
5a. Wait on the recovery environment launch screen (Not Logo with the name of the installed firmware!), in this case, TWRP
5b.. Release the button.
6.For the use of custom recovery, you need an aeromic, or a USB mouse, for the remote control of Sabza can only be controlled by stock recovery!

Would bring order in the header, or it is available to paint that this recoverynot stitched inanddoes not replace the recovery mode.

Post has been editedserge_kononoff - 27.01.19, 15:38

Hello everyone. I brought me sad yesterday, no image via HDMI, AV works, but the picture was expected.
So I remembered about Bluetooth / WiFay whistles in TV. It will go to spend the whole thing? I tried who? How to picture? TV LG 1080

Replace a mouse. Buy just more expensive than 300 p))
Really. The problem is disappeared

Be sure to do after a complete recovery with the new stock firmware, otherwise the old software and other AFR tools will only interfere, and it is even more difficult to clean it or disable them than to make a full recovery and still you can forget something.

Installation of the script in Kodi:
1. Come here -Kodi.amlogic.script.frequency.switcher., Choose script.video.fswitch-2.1.1.zip (if not new), download yourself to the USB flash drive and connect a USB flash drive to the console.
2. Run KODI, in "Settings / System Settings / Supplements" we turn on "Unknown Sources".
3. Go to the Kodi main screen, we go to "Add-on / My Supplements /../ Set from the ZIP file", there we find your flash drive and install script.video.fswitch-2.1.1.zip.
4. Go to "Supplements / My Supplements / Videos", find Frequency Switcher there - open, run, go to "Service".
5. Here we turn on "Playback Starts", select 50 or 60 Hz by default (depending on the native frequency of the telly).
6. We leave the notifications on and save the configuration.
7. Restart Kodi.

Checking Droid Settings:
1. DISPLAY.
1.1. Display Screen Resolution
1.1.1. Auti Switch to Best Resolution - OFF
1.1.2. Display Mode - 1080p60hz (if 50Hz is selected in KODI, then we put 50 here, the resolution is only to display the system screen, the movie will be displayed with its resolution)
The rest of the items depending on the capabilities of the TV, but I finally managed to work with YCBCR444 at these settings.
1.2. Screen Position - I got 92%.
3. Playback Settings
3.1. HDMI Self-Adaption - Totle Mode.

It is advisable to restart the console.

We start KODI, here we select the desired content and check the operation of the script - with the settings specified above when the movie is turned on, the screen should go out to the half second second, after which the frequency change appears. After turning off the movie when you return to the KODI menu, the frequency return message will appear.

I have not seen the more correctly working AFR on my prefix. The first couple of seconds after starting the film, as well as during operation with the menu during viewing there may be micro-tweers - this is normal, the view itself is ideal.

Enjoy!

On 2/16 folk firmware will not be?

I do not have such a box, do nothing on ...

I can pull Alice_Launcher out of my Tanix, if anyone needs it.

Post has been editedsasvlad - 27.01.19, 15:51

Firmware from Tanix TX5 MAX, no one tried?
https://mega.nz/#F!QAp...lcoiouVfX7uCg!8EgiFAJC

Somebody revealed the dispute on Ali because of the burnt HDMI? I wonder what the Chinese answer.