zhorik13 I'll try, ATP

Posted 09/15/2019, 9:09:

Colonel0789 I'm sorry, in the drain run updates, writes that this is the latest version. How to update the firmware and how to take?

And that she should write, if the latest version is, and hardly at all updates will be

Sergio159 The March firmware provides an update on the April once all sewed then ota.

I also had 311_20190223-1604, updated OTA on v311_20190302-1355, after not coming updates. It turns out that I need to sew the April?

Fog07 Yes, but I bought with the April and OTA was at 25,062,019.

People burned HDMI port today checked Diode Arrays (in harness HDMI port protection) 0524P, shows the fault / breakdown. Someone took it for the diode assembly in the circuit ?,
Who can measure up the diode assemblies in the circuit?
It's called circuit diodes or indeed breached.

Sergey591983,
See datasheet on them. Google easily. There, each data line is worth two "diode" on + and on -. They immediately opened at about 6V, and anything above this threshold goes to the power bus and the earth. It is the job of the defense in theory. There will be clear how to properly call.

zibuchigor

Perfect player - reliable, Halva - comfortable and beautiful

zzzaj ,
Diode Arrays show fault on both sides. In the photo line 4 datasheet and so I found, I have no confidence that the board did not call.

Hello,
I bought this device a couple of days ago. I puzzled firmware.
Also I jumped with a tambourine, perevtykival ports to connect external power to the box.
... and so on until you have tried to connect the box via an active hub
with an external unit. Power supply - Laboratory ammeter table.
When the firmware current jumps from 0.4 to 0.6 amps. Therefore, many ports are refusing to
to work with him. When the firmware through a hub (10 times in the sewing end) .. All firmware and successfully the first time.
Yes .. and meals consoles via jack - does not help with the firmware .. seems different power circuit.

Now the problem with studying spdif. At first he worked, then a distortion of the cable, is now no way.

Sergey591983,
It is hoped that the assembly have fulfilled their function and protect cent, even irreversible, are dead at fault. Blow off their hair dryer, ping without them.
Where the pin is a digital data link, simplified. Only on my screenshot for some reason not specified connection with + supply and it should be.

Post has been editedzzzaj - 15.09.19, 13:39

Anubis_OD,
Therefore, from here and follow recommendations about the cable yusb Dad / Dad that he should be a short and very expensive. Anyone can be, with 4 thick wires, at least two network 220 from the iron, the main thing that they did not fall.

Sergey591983 ,
That's the same problem, I burned hdmi port. 3 months not worked. HZ now do with it.

Post has been editedArturgprs - 15.09.19, 13:50

I offered to add a hat, but something did not want

For me the best prog - TiviMate. user-friendly interface, and Amlogic fixed function makes the video smoothly, without jerks.

I flashed X96 MAX 2/16 DDR4 onboard q5x2 v4.0 of 18472Stock firmware 15.03.2019. When you press the remote button "mouse," a virtual keyboard pops up with the cursor, ie and "mouse" is activated and klavitura on the floor screen. Remote non-voting standard. Why is it possible to download the correct configuration over the console and where to get it? Thank.
Maybe it's a feature, not a bug? I do not even know what to think

Post has been editedsimpampon - 15.09.19, 14:28

The branch has events with the translation. Although the launcher Russian language is not strong and need. This is not a novel in three volumes.

These assemblies protect against overvoltages between the signal line and the common wire device, but not from the potential difference between the devices. That is the reason for this difference is out of the hdmi most often. And not only in this box. On the Internet, described cases, when burnt out ports on the laptop and your TV at the same time, about a variety of other devices, too.
The main problem is the lack of proper grounding line in our networks.

Post has been editedAndreyD - 15.09.19, 14:59

Tell me, please, I beg X96 MAX 2/16 DDR4 onboard q5x2 v4.0 firmware runoff 15/03/2019 18472
All seemingly good, but in fact all applications fall or nothing happens: lime tv "unresponsive" and then "in the application failed" - it all depends upon inclusion of channel smarttvyutub the same thing after starting the roller hdvideoboks at film launch not hanging, but mhpleer broken too, the RT-TV - similar to
What happens with the prefix? Something on the iron or you can do something?

Update:
CHANGED BLOCK and everything was okey

Post has been editedsimpampon - 15.09.19, 15:20

AndreyD,
Network at anything. Leveling potentials should be between the boxes: TV, set-top box, PC / laptop, a receiver, a cinema house. Multivarka maybe someone.

Posted on 15/09/2019, 15:18:

space71,
Try adw nastraivaivaetsya absolutely ace, there are Russian.


top app shortcuts, folders below.

Post has been editedzzzaj - 15.09.19, 15:19