X96Max (S905X2) [Android] | [Media console]



Rep: (354)
DiscussionX96Max (S905X2)
Tv box
Discussion пїЅ | Marriage and Repair пїЅ | Catalog of programs for Android set-top boxes пїЅ | Games for Android TV Box пїЅ | IPTV playlists пїЅ | Playlists IP-radio пїЅ | discussion panels |



Specifications
old revisions
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 32/64 GB + 4GB LPDDR4
  • Network: Gigabit Ethernet, WIFI 802.11 b / g / n / ac, Bluetooth 4.0 | Ampack AP6356S
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards

---------------------------------------------------------------------
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 16 GB + 2GB LPDDR3
  • Network: 100 Mbit / s Ethernet, WIFI 802.11 b / g / n | Realtek 8189E
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards
new revision
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 32/64 GB + 4GB LPDDR3
  • Network: Gigabit Ethernet, WIFI 802.11 b / g / n / ac, Bluetooth 4.0 | Ofeixin 6222B-SRB RTL8822BS
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards
A photo
Attached Image
Attached Image
Attached Image
Attached Image
How to determine the audit?
Reveals the console and see the markings on the board next to the CPU.
Example

The old revision with 2GB RAM
Q5X2 V1.0 18482
Q5X2 V1.5 19023
Q5X2 V2.0 18375
Q5X2 V4.0 18472

The old revision with 4GB of RAM
Q5X2 V3.0 18395
Q5X2 V5.0 18483
Q5X2 V5.5 19015
Q5X2 V7.0 19133

The new revision with 4 GB of RAM
Q5X2 LP3 19215
Firmware
Linux
PC software
Recovery
Instructions
Useful
Polls
Attached Image


Before asking a question in the subject line, please use the search engine!
Attached Image


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedCuphead - Yesterday, 04:57
Reason for editing: X96Max_20200115 of RUS-05 + patch for a new revision



Rep: (16)
* freekoks , I decided to take advantage of this setup: Copy hid-betopff.ko in "/ system / lib /"
Rights chmod 644 "/system/lib/hid-betopff.ko"
Copy Vendor_20bc_Product_5500.kl in "/ system / usr / keylayout /"
Rights chmod 644 "/system/usr/keylayout/Vendor_20bc_Product_5500.kl"

Reboot, if not start, then
Add file "/vendor/etc/init/hw/init.amlogic.board.rc" line
insmod /system/lib/hid-betopff.ko
Reboot

Download here:https://yadi.sk/d/YOaldKIZ3GuQeAThe result is zero, the red LED lights up one or more responses there

Post has been editedyustasyustas - 24.07.19, 19:00
Reason for editing: Adding



Rep: (0)
Hello! I do not prompt, change the brightness settings in the set-top box (drain) and nothing happens.
and what that color is too saturated in applications. Can I adjust the settings?



Rep: (70)
* Egorka97,
I just adjusted on the TV. But I have a set-top box in addition to a TV set connected to nothing at all, no antenna. By this I am not critical.

Post has been editedAL22 - 24.07.19, 19:42



Rep: (-1)
* Egorka97, with the help of prefixes can not do it, only on TV



Rep: (13)
Egorka97 @ 24/07/19, 19:20*
changing the brightness of the set-top box (drain) and nothing happens in the settings.
and what that color is too saturated in applications. Can I adjust the settings?

No brightness adjustment, etc., only on TV.



Rep: (215)
* Buratino Karlovich ,
Buratino Karlovich @ 23.07.19, 23:20 *
Gafni, a long cable? try to shorten, someone else wrote, if there is a short as possible, as an option, long tightly rewind (not tested), I sew only a short adapter yusb-yusb

So I'm thinking maybe I ukaratit my cable to not uznovaemosti or rewind it)))))
The whole point kechestve cable and its conductivity. 1m 20cm sew on hurray for 2 years))) but it is not of wooden))) for the cons have turnip ready to accept ...



Rep: (110)
Yes, tightly roll up and twist the blue tape and it will Hadron Collider o.O



Rep: (-1)
Advise quality hdmi cable v2.0 with aliekspress.



Rep: (262)
* vova0502 , Look inexpensive on the number of purchases and a good rule otzyvam.kak quality and price does not correlate with the cables, low-cost cable exactly how expensive



Rep: (215)
vova0502 @ 24.07.19, 22:09*
Advise quality hdmi cable v2.0 with aliekspress.

Now look here:https: //ugreen.ru.alie...00002.2.39257fa4wKfcQd



Rep: (0)
Model x96max_v311_P VYa 4.9.113
Tell me, why aida64 = manufacturer should droidlogic, franklin board, and the purity of the range of 100-1800
When the photo other options?



Rep: (975)
wertolet77 @ 24.07.19, 20:27*
Tell me, why aida64

This question is here:
https://www.aida64.com/support



Rep: (2524)
wertolet77 @ 24.07.19, 21:27*
Model x96max_v311_P VYa 4.9.113
Tell me, why aida64 = manufacturer should droidlogic, franklin board, and the purity of the range of 100-1800
When other photo options

Because:
1. Ondroid P to x96 max, this is not the official of a test betka
2. franklin is the code name for amlogic s905x2 assemblies
3. Chinese molodsy quickly orient



Rep: (1)
diabolusss @ 24.07.19, 15:37*
Good afternoon, forum users. Recently I received this wonderful boxing and was happy with everything until the FOTA upgrade the software to the latest version ... 311_190302_1355. Before that ran Tspu_trottl, as surveys have met an interesting opinion that additional cooling provokes CPU throttling, and hoped to refute it ... But not in time, because after the second consecutive update found that:
1. The maximum frequency of the processor everywhere (Aida, system, etc.) is now less than 100 MHz, i.e. 1.8 GHz instead 1.9Ggts and therefore the best results in the test throttling is not about 45k, and 40k.
2. The last update brings stiffer throttling and now after a few minutes of operation frequency decreases steadily (without discontinuities) up to 80% of maximum. The temperature as above is less than 54 degrees on the passive cooling. The result is accordingly an average of 30fps, that is on the z28 Pro level.

Who can faced with such behavior? I understand now the only option is to rewrite a custom kernel (some recommend)? or the ability to roll back to a previous version without flashing? I want to make sure that I understand from reading on the forums: with the SD card, you can flash any custom kernel on this box !?


* lolas34,
It's not about parrots, and that the last upgrade is clearly lowered productivity consoles. And at the moment I am concerned it is a solution to this problem, but thank you for sharing your opinion.

And earlier voiced issues I want to add one more - Were you able to override the behavior of the basic hours of boxing? Those. what would you shutdown or sleep boxing clock continue to operate.

Post has been editeddiabolusss - 24.07.19, 22:16



Rep: (83)
* diabolusss,
dvfs amogic taxis on a separate module in the soc, which receives from the figures in proprietary binary file. So that only the downgrade will help ... But you uereny
proizvditelnosti in the fall? Another benchmark did not try?



Rep: (0)
Does not start Tricolor TV Online

x96 max 4/64, of the box, firmware sink is connected to a cable grid.

Uploaded by Tricolor TV Online (I subscribe to the cottage).

At start Tricolor outputs "Error 21" (there is no connection to the network).

In the setting grid Tricolor (nowhere else he will not allow) with the cable-existent. According vayfay hangs.

Thus Vink by cable runs.

Does anyone know how to fix this bug?

Thank.



Rep: (143)
* Huntvar , Ruth mb reaction.? Vink scrambled with unhidden Ruth also does not seem ..

Post has been editedItMan_75 - 25.07.19, 09:40



Rep: (9)
* Huntvar, by searching in the subject look about the flag, someone has written



Rep: (209)
* ItMan_75,
Vidoz on copyright: D



Rep: (209)
* ItMan_75,
This video is unavailable
This video contains content owned by the user to the UFC. He blocked their show in order to comply with copyright.


Full version    

Help     rules

Time is now: 11/08/20, 23:01