Switching on and off Hitaste P6

Turning on
Quickly press the power button 3 times within 2 seconds to turn on.
The apparatus vibrates once for preheating. Preheating of vibration is completed after the other, after which it is ready to smoking.

Power off
In standby mode, briefly press the power button 3 times.
The device vibrates once with automatic shut-off and displays OVER lettering.
------------------------------------------------------------------------------------------------
Setting the temperature and time of smoking Hitaste P6

Setting the temperature
Adjustable temperature range: 200 В° C - 300 В° C
Press +/- to increase or decrease the temperature. We recommend using 250 В° C as the best heating temperature.

overheat protection
When the device or using the cleaning function displays TOO HOT. Please let the product to stand for 1 minute, then restart it.

Setting the time of smoking
Adjustable range of smoking time: 180 - 360 sec
In standby mode, press the power button 5 times, flashes the smoking time, click the "plus / minus" to adjust the desired time of smoking, press the power button once to complete the setting. Setting the time is not supported during the time of smoking.

---------------------------------------------------------------------------------------------------

automatic cleaning function Hitaste P6
There are two ways to start the cleaning function.

First way
Press the power button 8 times continuously in standby mode,
automatic cleaning device starts vibration with 1, showing cleaning after 5 seconds and the timer is running.
The surface of the heating element is automatically cleared, and the device vibrates again when automatic cleaning is completed.

Second way
After every 5 sticks of tobacco smoked, the system automatically notifies that the device needs to be cleaned. At the same time it vibrates 5 times, remove the stick and press the plus / minus to switch the Y and N, select Y to start cleaning.
After confirming the removal of the stick, press the power button to confirm and enter into a state of purification, select N or no operation for 15 seconds, and then return to the main interface. Do not forget to remove the stick before cleaning.

After the automatic cleaning is completed, remove the heat insulating cover, clean coal dust at the bottom of the heat insulating cover and lower holder tobacco sticks with a brush for cleaning, cleaning swab and t. D., Then put the lid back on the device for continued use.