Amiko A5 Combo [Android] | [TV Box] [Amlogic S905D]



Rep: (2)
DiscussionAmiko A5 Combo
Other
Discussion пїЅ
Specifications
General specifications:
Processor: Amlogic S905D 64bit Quad Core 2.0GHz
GPU: Octo-core Mali 450MP (600MHz)
RAM: 2GB DDR3
Flash memory: 16GB
Supports standards: DVB-S / DVB-S2 / DVB-T2 / DVB-T / DVB-C
Operating system: Android 7.1 / dualboot Enigma2

Interfaces:
HDMI: Type-A, Version 2.0
AV: Jack Type (CVBS video & Audio L / R output)
USB: 2x USB2.0
SD-card: 1 MicroSD slot (up to 32GB)
Ethernet: 100 / 1000M RJ45
WiFi: 2.4G wifi Plank
S / PDIF: optical digital audio output
Card reader: 1

audio / video decoding:
Input Rate: Max. 120Mbit / s
The aspect ratio of 4: 3, 16: 9
Video codecs: H.265 / HEVC, MPEG-2, MP @ ML, MPEG-4 Part 10 / H.264
Video Resolution: 720 * 480, 720 * 576, 1280 * 720, 1920 * 1080, 2160p
Audio codecs: MPEG-1 layer I / II, Mpeg2 layer II, Dolby Digital
Audio Mode: Left / Right / Stereo / Mono
Sampling frequency: 32, 44.1, 48KHz

Tuner and demodulation:
Tuner type: DVB-S / DVB-S2
Input connector: F-Type (Female)
Signal level: -65 to -25 dBm
LNB Power: Vertical: + 13V / 14V, Horizontal: + 18V / 19V
LNB Current: 400mA max (overload protection)
22kHz Tone: Frequency: 22 kHz В± 4kHz
DiSEqC Control: Version 1.0, 1.1, 1.2, USALS (Amplitude: 0.6 В± 0.2V)
Demodulation: QPSK, 8PSK
Input Symbol Rate: 2-45Mbps, Convolution Code Rate
FEC: 1/2, 2/3, 3/4, 5/6, 7/8, 1/4, 1/3, 2/5, 3/5, 4/5, 8/9, 9/10, auto
Tuner type: DVB-T2 / DVB-T / DVB-C
Frequency range: 48 ~ 862MHz
RF Input Level: -80dBm to -20dBm of
Antenna power output: DC 5V at max 75mA, Overload protection
Demodulation: COFDM 1K, 2K, 4K, 8K, 16K, 32K normal and extended
Input Symbol Rate: 1.0 ~ 7.0Ms / s
Constellations: QPSK, 16QAM, 64QAM, 256QAM / Both rotated and non-rotated
Guard Intervals: 1/4, 19/256, 1/8, 19/128, 1/16, 1/32, 1/128
Code Rate: 1/2, 3/5, 2/3, 3/4, 5/6

Power supply:
Type: external power supply
Input voltage: 110 - 240V AC
Output voltage: 12V (2A) DC
Consumption Standby power:<0.5W

Physical characteristics:
Size: 140 x 100 x 31 mm
Operating temperature: 0ВєC - 40ВєC
Storage temperature: -10ВєC - 70ВєC
Storage Humidity: 5-95% RH (non-condensing)
A photo
Attached Image

Attached Image

Attached Image

Firmware
system images to flash through Amlogic Burn Card Maker / USB Burning Tool
Version: 1.0.04link_droid_1.0.04_cis_s905D_20180402.img


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editeda.l.t.a.i.r - 23.09.18, 21:27
Reason for editing: Added firmware



Rep: (2)
Connecting to a TV without hdmi. Pinout AV cable 3 Г— RCA - TRRS

To connect via tulips requires 3 Г— RCA-TRRS elongate cable connector jack 18 mm long, less will not work.
Photos jack connector
Attached Image
cable pinouts (the main thing - the location of the "earth" contact, the rest can be reconnected)
AV cable pinout
Attached Image



Rep: (0)
I bought the receiver. it works, but I can not load the keys and configure Sharing, help, please, for the teapot, what and in what sequence to do. Thank!!!



Rep: (0)
Probably all similar to the A4 - is a special Oskam. I would immediately put Enigma emulators out there working like clockwork
http://images.mynonpublic.com/openatv/6.2/index.php?open=alien5



Rep: (0)
Bought Amiko A5 COMBO 4K set Enigma2 from OPENATV 6.2 neiogu opened to feed section Softcam, may have the file ipk ukovo emulyator wicardd 1.19 OpenATV by other receivers are not suitable or tell how to open SoftCam to feed thanks in advance.



Rep: (0)
try
Attached filesoftcam-feed-universal_2.0_all.ipk.7z(1.32 KB)



Rep: (0)
try
Attached faylsoftcam-feed-universal_2.0_all.ipk.7z (1,32 kb)

ipk file is installed on the feed softcam appears.



Rep: (0)
Good evening! I ki pro. For iron, much like a box. Very interested in the quality of sd channels. On ki pro soap.



Rep: (0)
on AmС–ko a5 - normally.



Rep: (0)
Could you tell? I AMIKO A3. He regularly (once a week) ceases to be loaded, it is necessary to throw off the setting. I want to go on AMIKO A5, there is no such problem? And another question dogonku. Time shift through the pause button on the remote control is working, or only via the menu, as in the A3?



Rep: (0)
There is a new software 1.0.9, when the A5 an opportunity for 5 seconds select the Android system or Enigma 2.



Rep: (0)
Where to buy a Russian?



Rep: (0)
Prompt at Galaxy Innovations such a model, no?



Rep: (2)
Installing OScam emulator on android Amiko A5 Combo

1. Downloading oscam, e.g.Attached fileOScamNew_20171214_with_lib.apk(2.95 MB)
2. apk throws file to the device from the archive (e.g. via flash usb) and install.
(Installing as usual on android, select the file in Windows Explorer our .apk file and install)
3. After installing the application run OScam
Attached Image
4. Next, you need a PC to go to the browser by the link specified in Annex OScam. (This is a link to the web interface to manage oscam)
Attached Image
Upon entering the browser asks for login, specify the username and password in oscam application.
(Look at the parameters, they may differ from the ones in the screenshot)
5. As you can see, OSCAM works, you can make the necessary settings from the web interface.
Attached Image

More information about the setting of the oscam can read here to see prices:
https://giclub.tv/index.php?topic=6166.0
https: //sat-madi.com.u.../showthread.php t = 4001?


OScam 11391 (apk) Attached fileOScamNew_20171214_with_lib.apk (2.95 MB)



Rep: (2)
OScam update on android

OScam for android can be supplied as a full .apk (app together with OScam).
And as only a binary file that can be useful if the application is already installed, and we want to update itself OScam.

To update only binary OScam
1. Download and unpack the archive with OScam, egAttached fileoscam-ndk-EMU-A5-11431.zip(826.64 KB)
2. Take a usb flash drive, create on it the following directory structure \ plugin \ var \ bin and throws back the decompressed file
(In our example: \ plugin \ var \ bin \ oscam-ndk-EMU-A5-11431)
3. Insert the USB flash drive into the receiver, it prompts you to upgrade Planina agree
4. Go to the OScam application, we see that section, a new plug-in item (in this example oscam-ndk-EMU-A5-11431)
Select and run it
Attached Image
5. To check, go to the PC in the web interface and see what works and OScam version corresponds (in the example r11431)
Attached Image


OScam 11431 Attached fileoscam-ndk-EMU-A5-11431.zip (826.64 KB)



Rep: (3)
I want to replace my old amiko 8900. I can not determine the choice amiko a5 combo, ki pro or kiii pro. Which of these is better to take. Priority satellite TV practically does not turn off, which of these receivers from a satellite image better?



Rep: (3)
He became the owner of this receiver, after unusually amiko8900, but figured no problem.
Once updated, set Oskam, Shura started up immediately, but biss me tortured, half of the channels opened in any half and re-copied keys, and put mcas still the same.
Lastly, I had the idea to update the oskam, and all opened.
Generally the device like one thing, there's no sleep timer, for me it is a big disadvantage, because I used to fall asleep to the TV.

Post has been editedvitli - 02.11.18, 20:46



Rep: (1)
vitli @ 02.11.18, 19:45*
Generally the device like one thing, there's no sleep timer, for me it is a big disadvantage, because I used to fall asleep to the TV.


And through the application or how? even HAND?
I'm interested in this question too



Rep: (3)
* zvasl ,
Enigma on any timers nastrayuesh himself.
On Android settings do not have, but it is not needed, there is a car off in standby mode, I do not know how many disabled fall asleep, get up in the morning it's off. So everything is fine.



Rep: (1)
Where you can take ready-made list of channels for android and Enigma?
thank



Rep: (0)
Please tell me exactly where and in what format throw BISS keys Oskam on android?


Full version    

Help     rules

Now: 01.12.20, 17:47