> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Xiaomi MiPad 4/4 plus - Informal firmware
Best firmware
Android 10
BlissRom [ 70 ] ** [27,34%]
HavocOS [ 77 ] ** [30,08%]
AICP [ 6 ] ** [2,34%]
SuperiorOS [ 5 ] ** [1,95%]
Carbon [ 28 ] ** [10,94%]
LineageOS [ 47 ] ** [18,36%]
ArrowOS [ 13 ] ** [5,08%]
Android 9
SoperiorOS [ 12 ] ** [4,69%]
Pixel Experience Plus [ 35 ] ** [13,67%]
Crdroid [ 9 ] ** [3,52%]
LineageOS [ 23 ] ** [8,98%]
Omnirom [ 6 ] ** [2,34%]
HavocOS [ 98 ] ** [38,28%]
Floko [ 5 ] ** [1,95%]
AOSP Extended [ 2 ] ** [0,78%]
Pixel Experience [ 21 ] ** [8,2%]
Mokee [ 10 ] ** [3,91%]
BenzoRom [ 1 ] ** [0,39%]
ArrowOS [ 9 ] ** [3,52%]
Total votes: 256
 



Rep: (2997)
Xiaomi MiPad 4/4 plus - Informal firmware
PictureXiaomi MiPad 4, Clover
Description | Discussion » | Purchase » | Accessories » | MIUI firmware » | Bootloader unlocking » | Unofficial firmware »




Drivers and Utilities



Firmware
Instructions
Useful


There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply by creating a new topic in the sectionI want to be curator(having previously studiedRules and recommendations for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedferhad.necef - 26.06.20, 06:49
Reason for edit: OS Oxygen [Port]



Rep: (62)
Comrades, has anyone already tried it outMokee ??



Rep: (21)
Dysentary @ 08/06/18 13:21*
Comrades, has anyone already tried MoKee ??

Here the review was writtenXiaomi MiPad 4 - Discussion (Post TexnoUser # 75587318)



Rep: (128)
Dysentary @ 08/06/18 13:21*
Comrades, has anyone already tried MoKee ??

While special shoals did not notice. All in Russian. The only event indicator flashes for some reason) But maybe because of Antutu

I took myself a tablet. A suitable device of course, toys fly to the top-max. Ladders really straining in NFS NL and Asphalt 9, but there configs can be fixed. In Antutu 142 thousand knocks out. Convenient to hold in one hand.
I would like to get a root, if someone has already received, write down pzh, with me +
Screen antutu
Attached Image


Post has been editedSt2ff - 23.01.19, 15:23



Rep: (169)
At the request of colleagues I translate the instructions for installing Treble - firmware on our device. The original ishere.
Instruction
1. First of all, we need to unlock the bootloader, how to do it - described in the correspondingtopic
2. Install the appropriate recovery. For convenience, rename the downloaded file torecovery.img
Put in any convenient folder, in the same folder on Windows, hold Shift + Right mouse button - open the command window. We connect the tablet in Fastboot mode (it is necessary to turn off and hold down the power button + sound down until the hare repairman appears on the screen) to the computer. Enter the following commands:
fastboot devices
If everything is ok, your device will be displayed here.
fastboot flash recovery recovery.img
wait until it settles

3. Download the filemisc.bin(I don’t know why it is necessary in our case, because everything works without it), flashing with the appropriate command
fastboot flash misc misc.bin

4. Boot into the recovery team
fastboot boot recovery.img

5. Download the image of any favorite firmware from the topicProject treble. We unpack the archive with the firmware (as a result, we must receive a file with the extension .img) and drop it on the tablet.
6. In TWRP go to Wipe ->Advanced wipe and tick the following sections:
Dalvik / ART cache
Data
Cache
System
We confirm the wipe
Attached Image
Attached Image


7. Next, go to the Install item, click Install image, select the image of the downloaded firmware and the System section for installation.
Attached Image
Attached Image

8. Return to TWRP, go to Install, click Install Zip and selectAttached fileDisable_Dm-Verity_FEC_v1.2 (1) .zip(3.49 MB)
and flashing, after which you can boot into the system
Attached Image
Attached Image

Recommendations and experience using the Pixel Experience
1. For comfortable use of the firmware, you must make the following edits to build.prop
ro.sf.lcd_density = 320
ro.build.characteristics = tablet
persist.camera.HAL3.enabled = 1
persist.sys.qcom-brightness = 4095
ro.product.manufacturer = xiaomi
ro.product.name = clover
ro.product.model = Mi Pad 4

2. LTE on this firmware works adequately
3. In order for the screen rounds to look normal - you need to use an application like Rounded Corner
4. Calls can not be made


Post has been editedSt2ff - 23.01.19, 15:26



Rep: (273)
My experience with the firmware Treble

Here Russified instruction from a respected * Vladkor97 how to put treble firmware with recommendations and pictures - we do everything as it is written there and unforgettable to thank the author of the post.

In my case, after unlocking the bootalader and following the instructions clearly, nothing helped.
As a result, I downloaded the latest stabilizer for firmware via TWRP, rolled up and after the very first time I followed the instructions to successfully install the Treble firmware.

Keep in mind that the recommendations are based on "my case" and it is quite possible that on your devices it may be a little different.
Info about the firmware that was tested
* Omnip - works fine, but without Gaps. After installing them the most and the next time you try to open the PlayMarket, the screen turns black and ... That's it.
* OffRR Oreo from 08.18.18 - I don’t recommend to install yet, the screen does not work correctly, periodically flashes
* Off DotOs Oreo 06/16/2018 - I recommend, very fast and smooth firmware, some bugs on the first look are not noticed
* OffAOSP Ext Oreo - not installed, after installation, boot into Fastboot.

*AOKP Oreo - after loading glitches fell down.
* OffHavocOs from 08.30 - does not want to boot, as it was not sewed - it's useless, you can - tell me how.
*AICP - it started, everything quickly and smoothly.

*ToxicOs - did not start, constantly returns in twrp
*Pixel Experience O - all Pts is good, only with certification you need to understand the subject required instructions
* OffcrDroid 4.4 - did not start. You can let me know how :)
*Carbon - did not start
*Lineage pie - everything started, it works smoothly.
*Lineage gappsed pie - it started, everything works smoothly, except for painting the interface.
*Benzo Rom Pie - very smooth firmware, with a lot of settings
*Android 9 Public Realize 1 - the firmware has started, but wifi does not work (Thank you for the info Cuoco92 )


On mysubjective The opinion at this stage is the most adequate Treble firmware:
Benzo Rom Pie
Piexel Experience Oreo, Pie
DotOs Oreo


Post has been editedatm_Aleksandr - 16.09.18, 18:09
Reason for editing: Added firmware info.



Rep: (11)
* atm_Aleksandr , did everything according to the instructions.
I recommend before flashing dm verify flash magisk, in my opinion disk encryption is obtained due to the fact that dm verify did not flash. I made the same mistake, rebooted and got the encrypted disk. You need to try to flash dm verify.

I made the following error: after I saw that the disk was encrypted, I returned to twrp (by the way, it boots for a long time when it cannot decrypt the disk) and made format data and began to flash magisk, gapps and dm verify. As a result, I did not have a keyboard during the initial setup.
In general, you do not need to sew gapps.

Recommendations:
1) before dm verify you need to flash magisk, then most likely your disk will not be encrypted
2) if 1 point did not help, then do format data, then magisk and dm verify

By firmware: I like it more than the Chinese stabilizer. Pure android as in any way. At first, it seemed that SimCity slowed down a bit, but it seemed to be a little bit worse. The only cant is that the corners are not rounded, as well as on mokee. Well, for some reason, the computer does not see. To whom you can connect only via twrp or fastboot.
The default font and interface is giant. In the settings I switched everything to a minimum and it became ok :) while I stay, everything suits :)

Post has been editedmr.plag - 08.09.18, 11:10



Rep: (273)
Yes, I agree, super firmware.
in my opinion, disk encryption is obtained due to the fact that dm verify was not sewn

Regarding the DM-Veryti, purely for the sake of interest, I took the firmware without it, the firmware started without problems. I understand that in general this file must be flashed, if you still have something other than the firmware file itself.
Since you wrote here
Before stitching dm verify, you need to flash magisk, then most likely your disk will not be encrypted

And I think this file does not belong to encryption.

If anything in the Pixel Experience gapps are already included.



Rep: (2997)
atm_Aleksandr @ 09/08/18, 14:43*
I think this file does not apply.
That's right;)



Rep: (273)
OnPixel Experience P Put the Google Camera. Not bad shots get.

Examples of Photos (small with a question on the face watched the process: D)
Attached Image
Attached Image
Attached Image
Attached Image


When activated, the 2API standard camera was chopped off and the downloaded GCam did not start.

To start, downloadthisand put throughMagisk as a module. You are overloaded and you have 3 cameras. GC and Built fully will work. ( a source )
* You can try to put a patch before activating ВІAPI, I needlessly a stock Miui camera, GC works great.

P.S. A bit later pofotayu on the street and add a spoiler.
Promised photos of shooting on the street. Just cloudy evening.
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

It seems to me, as for tablets - very worthy!
Fotkal this mod.


Post has been editedatm_Aleksandr - 15.09.18, 13:14
Reason for editing: Added street shooting and apk.



Rep: (273)
Pixel Experience PieTreble


Description
The firmware deserves special attention. It works very smoothly and stably. No additional settings. Gapps are preinstalled. With excellent energy efficiency.
* Under the wordStable I mean the overall smoothness and smoothness of work, but not the work of all functions, etc.
Fast charging is present.
Attached Image

power usage
The plot is very simple, up to 84% a lot of text.
Then I had to go. I found a long 1080 / 60fps video on Youtube, made a comfortable brightness (about 60%) and left.
Attached Image
Attached Image
Attached Image
Attached Image

Bugs
It does not connect to the computer in file transfer mode.

Installation
Detailed instructions how to install Here.

Screenshots
Attached Image
Attached Image
Attached Image
Attached Image

Useful
- Via Substratum You can completely paint the firmware theme SwiftDark
Root is required!
Install the theme, apply and reboot
Attached Image
Attached Image
Attached Image
Attached Image
After reboot, go to Management
Attached Image
Attached Image
Attached Image

- how to bring Google camera previous post
- Hereinfo about other firmwareTreble

A source:xda
WITHsway: githubarm64 aonly

Post has been editedatm_Aleksandr - 15.09.18, 13:08
Reason for editing: Update 09/14/2018



Rep: (273)
Arrow Os Pie Treble

Description
Good stable firmware with regular updates yet. With the updates, additional settings are being implemented. You can paint the built-in themes.
* Under the wordStable I mean the overall smoothness and smoothness of work, but not the work of all functions, etc.

Bugs
- Do not connect to the computer
- Auto brightness doesn't work smoothly
- After installation, when requesting certification, you will need to disable. How? We look at the topic Treble
As an option to turn off auto brightness

Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Installation
Detailed instructions how to install Here.

A source:xda
WITHsway:SFarm64aonly

Post has been editedatm_Aleksandr - 15.09.18, 13:11
Reason for editing: Update 09/13/2018



Rep: (311)
atm_Aleksandr @ 09/10/18, 14:15*
wrote off the fact that the current for the Wi-Fi version

Maybe just put mokee or MIUI on 4 different tablets, but they were all wifi only.

atm_Aleksandr @ 09/10/18, 14:15*
I hope the fix will be.

it is strange that no one except mokee rolled out a specially designed version for mipad 4. It is clear that mokee paid money to create an optimized firmware for a commercial batch for sale, but still. On xda silence in general

update:
atm_Aleksandr @ 09/10/18, 14:15*
after installing the format had to do?

yes, only data

Post has been edited/ life - 10.09.18, 14:26



Rep: (273)
/ life @ 09/10/18, 14:24*
It is strange that no one except mokee rolled out specifically the version under mipad 4.
I also thought about it.
I shake, I'll try still one more time.

By the way, how to use the "smut" option on the tablet info - in twrp mode: D



Rep: (311)
atm_Aleksandr @ 09/10/18, 14:27*
By the way, how to use the "smut" option on the tablet info - in twrp mode

Yes, it is good that the MTP worker is in TWRP. Theoretically, it was possible through ADB push or Total Comander with an ADB plugin in TWRP mode, but this is long and tedious)



Rep: (1812)
M
We move to subsectionXiaomi



Rep: (170)
Is it designed for LTE version?

Since the second version of the firmware Mokee supports the LTE version.

Post has been editedTysovwikk - 14.09.18, 13:58



Rep: (273)
Pixelupdated.



Rep: (29)
Is it possible to start Wi-Fi on Android 9 RP? I do not turn on (



Rep: (273)
Benzo rom Treble xda
Description
Stable firmware with the most number of settings on the Pie of those that I managed to run. With excellent energy consumption.
* Under the wordStable I mean the overall smoothness and smoothness of work, but not the work of all functions, etc.
Bugs
- does not connect to the computer
- After downloading, you must disable certification. How? We look at the topic.
- Camera, you need to fix. How? We lookhere
power usage

Brightness 60-70%. A lot of work with the text, YouTube and surfing.

Attached Image
Attached Image
Attached Image

Screenshots
Attached Image
Attached Image
Attached Image
Attached Image

Installation
Detailed instructions how to install Here.

WITHsway:AFN arm64-a-only

Post has been editedSt2ff - 23.01.19, 15:15
Reason for editing: In the header



Rep: (273)
Arrow osrefreshed
List of changes eng.
System themes: Black, Dark

OmniJaws: lockscreen, statusbar weather

network traffic

status bar clock & date customisations

double tap to sleep status bar

double tap to sleep lockscreen

QS quick pull down

MicroG / Signature spoofying support added

many more optimizations, fixes.

Phh device updates




Post has been editedatm_Aleksandr - 15.09.18, 13:45
Reason for editing: List of changes


Full version    

Help     rules

Time is now: 08/07/20, 7:49