OpenWrt / LEDE - alternative firmware | [firmware] OpenWrt / LEDE - discussion and problem solving
Vita077 Here is the medicine proposed by Google http: //ubuntu.fliplinu...awei-e3272-ubuntu.html Naturally, there are small nuances regarding the system: you don’t need to connect to the router via ssh, sudo (we’re already under the root) and change gedit to vi (this is another text editor). Everything else should be the same.
Vita077 @ 08/15/18, 06:59
I am trying to mount an open-wrt 14.07 on a Netgear W3500L v.1 router with a HiLink Huawei E3272 modem with optimal firmware for routers. I installed all the packages on the wiki, but the device is not indexed, the interface does not appear, I missed something or do it wrong? Power supply 12v 3A seems to have a margin - on the Vampik firmware, everything starts up from the floor of a kick, but I want to stay on the open-wrt.
exactly read the wiki? nothing is clear..
1) Hilink is not quite the optimal mode for the router (although this is not important, and the modem firmware is not here)
2) What does "not indexed" mean? What interface are we talking about? why should it appear? see logs.
3) 12v 3A power is nice, but where is the modem?
4) everything is possible on openwrt, but you have to configure it with your hands.
Dart Raiden @ 08/15/2018, 08:21
18.06, most likely, corny will not fit into 4 megabytes.
If you choose an assembly from a branchtiny It will fit, the other day poured into the tplink 841n he has 4 meters. True to the additional packages nothing left))
Dart Raiden @ 08/15/18, 07:21
18.06, most likely, corny will not fit into 4 megabytes.
I remind you that LEDE 17.xx was not recommended for devices with 32MB of RAM -4/32 warning. Although many wrote that they were fine, but I and a couple more people fell in 15-20 minutes Luci.
Post has been editedLESHIY_ODESSA - 15.08.18, 11:49
I put this firmware on my tplink wr841n routerhttps: //downloads.lede...1-squashfs-factory.binEverything works only here on the site where the firmware was downloaded There is an op-upgrade file, do I need to install it or can I do without it?
Mrkrasoff78, An upgrade is needed to upgrade from an older version of openwrt.
that is, for this version is no longer needed, but when a new one comes out, you can download the upgrade and upload it via the "backup / flashing" option, and the update will not reset the main settings (if you do not press the checkbox)
LESHIY_ODESSA @ 08/15/18, 11:46
I remind you that LEDE 17.xx was not recommended for devices with 32MB of RAM - 4/32 warning. Although many wrote that they were fine, but I and a couple more people fell in 15-20 minutes Luci.
January 17 months without any problems worked on tl-wr841-v7, ext. I did not seem to install the packages, the speed on the wire was ~ 95mb / s (connection through the static ip).
Dart Raiden @ 08/15/18 13:21
18.06, most likely, corny will not fit into 4 megabytes.
Yes, there is version 17, it was installed normally, but there is not enough space.
I switched my attention to GL-Inet routers from 16Mb (for a small commercial project to me).
[email protected], 21:55
additional did not install packets like
Most people think that the whole advantage of alternative firmware is extensible functionality due to the installation of additional packages. For me, now a router without usb is a little useful thing with an alternative firmware.
On TP-LINK 1043 V1 does not plow luci-app-ddns (OpenWrt18.06 ).
Well, I went in and fixedddns.luaon more recent. In the old typo. And nothing helped. On Xiaomi, what works amazingly. I even tried to compare files and they are all the same.
Failed to execute cbi dispatcher target for entry '/ admin / services / ddns'.
The action called terminated with an exception:
/usr/lib/lua/luci/controller/ddns.lua:107: attempt to index field '?' (a nil value)
stack traceback:
/usr/lib/lua/luci/controller/ddns.lua:107: in function 'service_version'
/usr/lib/lua/luci/controller/ddns.lua:117: in function 'service_ok'
/usr/lib/lua/luci/model/cbi/ddns/overview.lua:20: in function 'func'
/usr/lib/lua/luci/cbi.lua:66: in function 'load'
/usr/lib/lua/luci/dispatcher.lua:838: in function</usr/lib/lua/luci/dispatcher.lua:832>
The action called terminated with an exception:
/usr/lib/lua/luci/controller/ddns.lua:107: attempt to index field '?' (a nil value)
stack traceback:
/usr/lib/lua/luci/controller/ddns.lua:107: in function 'service_version'
/usr/lib/lua/luci/controller/ddns.lua:117: in function 'service_ok'
/usr/lib/lua/luci/model/cbi/ddns/overview.lua:20: in function 'func'
/usr/lib/lua/luci/cbi.lua:66: in function 'load'
/usr/lib/lua/luci/dispatcher.lua:838: in function</usr/lib/lua/luci/dispatcher.lua:832>
Well, I went in and fixedddns.luaon more recent. In the old typo. And nothing helped. On Xiaomi, what works amazingly. I even tried to compare files and they are all the same.
AndreyP68 @ 08.16.18, 10:27
all the advantage of alternative firmware is, extensible functionality
At that time, I didn’t have enough stability on the drain, so I switched to this firmware.
I also consider stability an advantage of alternative firmware.
[email protected], 18:55
I also consider stability an advantage of alternative firmware.
Surely, a good half of the opinions are the opposite.
Post has been editedAndreyP68 - 16.08.18, 21:15
[email protected], 21:15
Surely, a good half of the opinions are the opposite.
I’ve been sitting on a custom for more than 6 months and don’t complain.
Guys how to install pptp manually on Lede?
Ineta on the router is not. downloaded the packages from the phone following
kmod-pptp_4.9.117-1_mips_24kc.ipk
ppp-mod-pptp_2.4.7-13_mips_24kc.ipk
pptpd_1.4.0-3_mips_24kc.ipk
tell me what and how to set ...
wincsp is available
putty identity ...
Ineta on the router is not. downloaded the packages from the phone following
kmod-pptp_4.9.117-1_mips_24kc.ipk
ppp-mod-pptp_2.4.7-13_mips_24kc.ipk
pptpd_1.4.0-3_mips_24kc.ipk
tell me what and how to set ...
wincsp is available
putty identity ...
AndreyP68 @ 08/18/18, 9:00 PM
And free space?
root @ OpenWrt: ~ # df -h
Filesystem Size Used Available Use% Mounted on
/ dev / root 2.3M 2.3M 0 100% / rom
tmpfs 13.9M 664.0K 13.2M 5% / tmp
tmpfs 13.9M 48.0K 13.8M 0% / tmp / root
tmpfs 512.0K 0 512.0K 0% / dev
/ dev / mtdblock3 448.0K 232.0K 216.0K 52% / overlay
overlayfs: / overlay 448.0K 232.0K 216.0K 52% /
Filesystem Size Used Available Use% Mounted on
/ dev / root 2.3M 2.3M 0 100% / rom
tmpfs 13.9M 664.0K 13.2M 5% / tmp
tmpfs 13.9M 48.0K 13.8M 0% / tmp / root
tmpfs 512.0K 0 512.0K 0% / dev
/ dev / mtdblock3 448.0K 232.0K 216.0K 52% / overlay
overlayfs: / overlay 448.0K 232.0K 216.0K 52% /
Post has been editeda25k03 - 18.08.18, 21:04
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement