13thWarrior ,
On the website of the world itself there are quite detailed instructions for installing the firmware and twrp, there are also twrp distributions, separately for stable, separately for weekly. There are also drivers for the PC.
It is better to start the command line separately, and to prescribe the path to install.bat in it, then the window will not close and you can see the result.

13thWarrior , what for instailer and where did you get it?

MissSter99 Go to the page of Miruma, everything is described in detail there and TVRP is, for different versions

On the Chinese stock 10.3.1, the phone was heated from weak loads, and when it was loading or charging, it was boiling .... Now on the worlds 9.6.5, the phone is cold even when playing wot blitz at minimum settings through 4g .....

Posted on 06/17/2019 08:14:

zzMIXAzz , I took the topic in the cap and did not see such an option ... I assumed that a person sews not the recovery ....

MissSter99 , For each version of your Recovery Install automatically, read http: //portal.mi-room...tanovka-twrp-recovery/

Post has been editedzzMIXAzz - 17.06.19, 08:27

SF | AFH | Google | 9.6.13 MiRum | 10 | 9 | TWRP

http: //portal.mi-room...miui-mirum-v10-9-6-13/

Does anyone have been fed by fresh Miui about? For covered so far pay through Privat24 and buy now a problem

Has anyone put Mirum 9.6.13? I rolled on Miurum 9.6.5 fitting to the password, enter and goes into TVP. Now I re-selected, the situation, the situation, again loaded into the system, after the second time the eternal loading .... when plugged on, it is loaded again into the system, seconds 10 and again goes into TVP ... What could be the problem?

Post has been editedMissSter99 - 17.06.19, 19:02

MissSter99 , Oh, this world .. The firmware was taken exactly for Mi8ce?
Try: TWRP to the last update and re-serve with a connected charge

Post has been editedD_Godunov - 18.06.19, 11:35

Nazars Yes, she is signed .... it is loaded, you even have time to quickly unlock through the password ..... how to update TWRP, there is no computer, download from the phone, respectively. I remained firmware 9.6.5, I discarded her from the company, where she lies, I can not find? I think can roll back ...

Post has been editedMissSter99 - 17.06.19, 20:01

That's just recently updated Mirum 9.6.5 at 9.6.13 by setting over, in the end only made even additionally Vipe Kesh / Dalvik. TWRP 3.2.3 (1227).
Everything went successfully, it works fine until there are no complaints.

Post has been editedPaulvpm - 17.06.19, 22:58

Paulvpm I do not know what influenced, I had to clean everything except internal memory, ... now it works.

One in one. Only wipes do before the firmware :)

They have been checked with Ambient Display, now such a dull became that nothing can be seen.

Yes. Previously, after some time, tucking and turned off. Now there is dim, even the message icons are not clearly visible, it is necessary to look at the clock. Perebed the settings, so nothing changes.

muzika1987 I'm still bright

Guys, how to restore backup? Writes Mounting Read Only (something like this) ...

Post has been editedDugars - 19.06.19, 10:05

if someone has other (missing) version please share in the LAN
if you want to add something in the store, ask to PM

P.S. All firmware found infree Access to other sites

Post has been editedSPIRITic - 21.07.19, 23:34

Guys! I have Mirums 9.1.17, I decided to put fresh, 9.6.13 Is it dangerous if I am just on top to punish it, type update and norms? Or put on clean? How much so much water flowed over these six months ....

Kostrov176 , put, how lucky, be ready to make wipes, except inner ... respectively, everything flies .... I had to

Reached from 9.5.30 at 9.6.13 Wipe Kesh and all the rules everything works