Before you begin, read through this instruction to the end and only after the ALL FOR YOU UNDERSTAND, start, NO ONE IS NOT RESPONSIBLE FOR ANY DAMAGES TO YOUR device, ALL THAT YOU DO YOU DO AT YOUR OWN RISK! AT THE TIME OF THE USE OF THIS MANUAL UPDATE actual files TWRP AND USE TSELESOOBRANNOST "DECRYPT" depends on your firmware to this point in TOPIC INFORMAL METHOD OF UNLOCKING THE LOADER To begin, you should understand that when you unlock the bootloader, you lose the warranty, you will not receive the ota update, but the benefits
informal way It is an opportunity to block the bootloader again and return the device as it was. When using off. unlock utilities
there is no way back! so ;
1. install Android usb driver
linkas well as ADB
link2. download archive with files for unlock / lock
link3. connect the device to the computer in fastboot mode (volume up button + shutdown button)
you must first enable usb debugging before the next step, save the existing data to internal memory somewhere as all data will be deleted! 4. unpack the archive from point 2 and run a file in it
unlock.cmd (for linux users, file "
unlock.sh ") the file can be run as administrator.
5. unlock the bootloader and delete all data on the internal memory of the device.
6. load the device into normal mode after unlocking and that's it, you're ready for the next stage;
ALTERNATIVE PROCEDURE IF UNLOCKING UNDER THE HIGHER METHOD DOES NOT WORK WINDOWS 10 open the unlock folder
we clamp on the clave button
shift , then in a free space in this folder we click
right click ,Further
select in the context menu
open the powershell window here in the window
powershell enter the command below:
pay attention to the "point" at the beginning of the command!
WINDOWS 7 procedure also only in the context menu select
open command window Further in the command window we enter the command;
INSTALLING CUSTOM RECOVERY Depending on preference, you can use any of the following custom recovery, I personally prefer TWRP and have never used RWRP (therefore, to whom as);
but. TWRP
linkb. RWRP (Red wolf recovery project)
link1. download this file
DECRYPT.ZIPand
put in advance on the memory card 2. Download and install minimal adb and fastboot
link3. reboot the device to fastboot mode and connect to the computer (
USB debugging must be enabled )
4. run "minimal adb and fastboot" and execute the command in it;
make sure that our device is visible in the form of a serial
after this command we press
space bar then we write the recovery file directory or simply from the desktop with the mouse in the minimal adb and fastboot window (this way the directory of the twrp.img file is also set) Most importantly, there should be a space between the command itself and the .img file itself.
4. after flashing custom recovery
IT IS NECESSARY TO DOWNLOAD INTO IT AND DON'T LET DAYS FIRST DOWNLOADING INTO THE INITIAL SCREEN, OTHERWISE THE STOCK RECOVERY WILL BE RESTORED! (To do this, you need to hold down the "volume down + power off / on" button and as soon as you select the device, immediately throw the "power off / on" button while continuing to hold the "volume down" button until you see the first TWRP window VERY VERY IMPORTANT MOMENT AFTER RELOADING TO TWRP! but .
Being in TWRP flashing file
decrypt.zip from point number 1
b. After the firmware file decrypt.zip, without leaving twrp, click there
WIPE-FORMAT DATA in the next window we write in the field
Yes Next, click "
SWIPE TO FORMAT DATA "and you will have all the data on the device deleted.
with. reboot into normal mode.
ATTENTION ! ! For some, when you first log into twrp after the firmware, it asks for a password, in this case you must click
cancel \ cancel then return to the main twrp screen, then follow the intended instructions, tobish the firmware
decrypt.zip then back to the twrp main screen, and there
WIPE-FORMAT DATA write
yes and confirm the removal of the swipe below
ROOT 1. Download the latest version of magisk
linkand put on the memory card or internal memory
2. boot into TWRP and flash magisk and all profit, now you have a unlocked bootloader, custom recovery and root!
DOWNLOAD LOCK Very important ! Since the blocking process is also accompanied by the removal of all user data in the internal memory, I highly recommend making backup of your data so ;
1. swing
stock recovery link 2. Download utilities for removing magisk (root) and pre-putting it on an external memory card
Magisk-uninstaller-20200323.zip(2.57 MB)
3. reboot into TWRP and flash
magisk-uninstaller , reboot into normal mode and make sure that there is no root.
4. load the device into fastboot mode and connect to the computer (
USB debugging must be enabled )
5. open minimal adb and fastboot and execute the command in it again;
this time we are flashing
stock recovery! 6. for fidelity, after the stock recovery firmware, you can (even need) download the off-firmware and flash it again from the already installed stock recovery.
7. download again if you do not have it archive
unlock / lock link 8. We connect the device again in fastboot mode and from the archive run the file called
Relock.cmd or "relock.sh" for linux users (files can be run from admin if that)
9. after file launch
relock.cmd All data on the internal memory will be deleted as well as the bootloader is locked.
everything works if you follow the instructions correctly Post has been editedjide - 04.06.20, 23:09Reason for editing: replacing links