> Attention!

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Xiaomi Redmi Note 5 (Pro) - Modification and decorations



Rep: (5319)
Xiaomi Redmi Note 5 (Pro) - Modification and decorations
Description | Modifications and decorations» | Purchase » | Accessories » | Discussion » | MIUI firmware » | Custom firmware » | Camera talk » | Discussion topics for MIUI v10 » | Owners Club » | FAQ of general instructions and recommendations for Xiaomi devices - Firmware » | Useful topics section

Attached Image

Patterns of modifications and other decorations
Copy the content into your message and fill
Template for modifications:
[CENTER] [SIZE = 3] [B] [COLOR = royalblue] Here we write the name of the mod [/ COLOR] [/ B] [/ SIZE] [/ CENTER]
[CENTER] Insert the main screenshot here [/ CENTER]
[COLOR = blue] [B] Author [/ B] [/ COLOR]: Specify the author
[COLOR = blue] [B] Firmware [/ B] [/ COLOR]: Specify the version / number, code / deodex
[COLOR = blue] [B] Description [/ B] [/ COLOR]: The most complete description of the mod
[SPOILER = Extras. screenshots] If there are additional screenshots, then insert it here [/ SPOILER]
[COLOR = blue] [B] Installation [/ B] [/ COLOR]: Specify the installation method / method
[COLOR = blue] [B] Download [/ B] [/ COLOR]: Attach files to download


Template for other decorations (icons, widgets, programs, etc.):
[CENTER] [SIZE = 3] [B] [COLOR = royalblue] Here we write the name [/ COLOR] [/ B] [/ SIZE] [/ CENTER]
[CENTER] Insert a screenshot here (if any) [/ CENTER]
[COLOR = blue] [B] Description [/ B] [/ COLOR]: Full description
[COLOR = blue] [B] Download link [/ B] [/ COLOR]: Give a link to download

Useful and important information!
Important information. Read Required!

  • It is strongly recommended that before you do anything with your phone, make a backup!How to do it under spoilerInstructions.
    If, however, for some reason it was not made and Backupyou need to recover and not lose data, sew your firmware again without a wipe. That's all!
    All questions on the restoration of something can be regarded as offtopic and deleted!
  • "How to install Patched Theme Manager or third-party themes?" - the answer to such questions is fully disclosed under the spoiler. Installing third-party themes on MIUI 10. No need to litter the topic with similar questions, the answers to which are in the cap.
  • Before asking a question or writing an instruction,use the search on the topic and study the contents of the Caps Perhaps your question has already been considered.
  • How to draw up a post asking for help in the case of "Sortie" applications
  • Perhaps your question is generally better addressed in another topic. It is recommended to read the information under the spoilerInteresting and useful topics.
  • Messages with modifications and decorations, not designed byPatternmay not get into the catalog modifications.
  • This topicno table orders!It will be better and more correct to leave all your applications in special topics. Links to them can be found under the spoilerInteresting and useful topics.
  • The authors of the instructions, like no one else, except you are not responsible for the performance of your devices!
  • It is customary to express gratitude by changing the reputation, no need to litter the topic.


Jewelry catalog
Instructions
Installing third-party themes in the MIUI 10, 11
The Chinese have complicated the ability to install third-party themes in the MIUI 10, 11.
Options for installing third-party themes, from simple to complex:


1. Install Localized MIUI firmware with the presence of a patched theme manager (see topicFirmware, for example: Xiaomi.eu, MiuiPro, MultiROM, Masik в„ў and others);
2. Install Patched Theme Manager, suitable for your firmware (look under the spoilerTopics). But here it is worth remembering that this will only work onfully deodexed firmware;
3. If you have a stock firmware without root access, it is requireddesigner account with approved content
4. And the most inconvenient way: We parse the downloaded theme, at the end we write .zip, take the component (s) and drop them along the system / media / theme / default path, issue the 0644 rights, reboot and use the theme on which you are now.

The remaining methods for MIUI 10 have lost their relevance, or they are unstable. (critical systemui errors occur, themes crash on reboot or after some time). But maybe there will be fixes with updates: xpossed + xMIUI or Miui 8 Tweak , MI Theme Editor , MI Rape
If you know other 100% working methods, write in this topic.


Topics
Embellishments
Icons
Modifications
Prefabs and Updates
Automatic tasks
Dialer and Contacts
Sound, music, melodies
Desktop and Recent
Extended reboot menu
Network
Status Bar and Shutter
Lock Screen and Fingerprint Scanner
Font
miscellanea
Wi-Fi
Applications
Bootanimation & Splash
Butanimation Bootable logo (Splash)
Interesting and useful topics.
The authors of modifications and the Administration of the forum are not responsible for the performance of your devices!
Remember: everything you do - you do at your own peril and risk!

For questions about filling Caps contact the Curator -OutsatQMS


Post has been editedOuts - Yesterday, 15:12
Reason for editing: Setting Dolby and the Viper



Rep: (158)
Someone can get a standard theme immensity with 8.8.2?



Rep: (9)
Hello masik 2.2 firmware as possible to get to work subscrarum, who uses tell me please?

Posted on 08/04/2018, 21:17:

* aduka Yes yes also looking for, if I please get skinte



Rep: (248)
* aduka
Here the immensity of the topic



Rep: (22)
Experts, save! Fix does not work to increase the WiFi bandwidth from 20Mhz to 40Mhz. Did everything according to instructions, has added a line in the right place, rebooted. Everything is 72 Mbps. Comp drags far beyond 150. Router Xiaomi 3G. I suffer, for there is a normal speed of 2.4 GHz. And he does not see the body of the desired range of the router at a frequency of 5 GHz (channel 148 and above). If you set the region "Venezuela, for example, the desired band sees on after the loss of the network - again not seeing have to re-double-change region in the phone settings and time zone can be subject to somehow make do not check its location via the SIM card..? he understands that there currently is prohibited range and disables it.



Rep: (12556)
d.nasedckin @ 03.08.18, 08:34*
what could be?

All because of
d.nasedckin @ 03.08.18, 08:34*
10. miui 8.8.2

I have the same thing, the problem is described meHere.
For information. Who Xiaomi Redmi Note 8.8.2 beta 5, you can put anything - all the same all the status bar, and the icons do not change. Not yet corrected this bug.

Post has been editedDgonix - 05.08.18, 15:49



Rep: (21)
How to disable the system sounds in miui 10? Straining for example when you switch sound profiles with a normal quiet beep comes. There are options?



Rep: (34)
Name of labels / folders in two lines

Firmware : Global Stable 9.5.19.0
Description: On the desktop, brings long filenames shortcuts \ folder on the second line
Installation: via TWRP
Download: Attached file2Lines_GS_9.5.19.0.zip (2.34 MB)
Rollback: Attached file2Lines_Off_GS_9.5.19.0.zip (2.33 MB)

Screenshot
P.S. Can undo the changes previously installed patches, employs MiuiHome.apk
Attached Image


Picture


Post has been editedDima_Apatity - 19.09.18, 00:28
Reason for editing: In the header



Rep: (185)
Maybe someone from the specialists to create a patch for the custom firmware that they were exactly the same settings as the music and MIUI? All custom bikes sound some oversaturated. Viper, Sirenes Audio helps only partially.



Rep: (5)
Hi everybody. I recently the owner of this unit. Arranges everything, except for a few details. For example otsutvie normal search applications, in addition to Google. In my previous phone (Huawei P9) was very comfortable with a quick search button reading QR. After some searching on the Internet, I discovered that this function took place to be in miui 7 or 8 or only on Chinese Romakh. Search bar located right in the curtain under the weather. Here are instructions on how to return the rutovanom search.http://en.miui.com/thread-1396849-1-1.htmlMaybe someone porobovat and unsubscribe? If you are of course, as I need this feature.



Rep: (4566)
M
gyord dismissed from the post of curator. Thanks for the work you've done!



Rep: (0)
Prompt how to report this widget? Or have equivalent? And then he takes the floor screen ... 4x2 and half is not used ... I want the size to 4x1 icons cram more .. Ruth is ..


And if there are events in the variable grid table for miui 05/09/19 Global?

Attached images
Attached Image



Rep: (4878)
* maxpirat I can offer unpretentious widgets, weather, and not just sink. 4x1 size.
Attached Image
Attached Image

Attached fileClocks_Widget.zip(12.56 MB)


A grid is in the cap, it is common for the nines, regardless of firmware model.

Post has been editedDima_Apatity - 07.08.18, 17:49



Rep: (200)
Put the player on the Sony Xperia xz2 magisk module with all its buns, learned about it from youtube channel all about Android on our body plow as though there was miui, wishing to try spread module


Post has been editedbibosis - 09.08.18, 13:29



Rep: (34)
ak142 @ 27.06.18, 00:45*
Sberbank does not want to accept authorization by fingerprint. Only by Pina. After switching the settings, if you leave and go to the moisture setting returns to Off

Run Magisk, choose Magisk Hide, there are looking for your application to the Savings Bank, put the check, everyone! the application does not see the root, print works. The same scheme for Privat24 to work for rutovanom unit mark.

Posted on 09/08/2018, 21:41:

X30n @ 09.08.18, 18:54*
Show you how to remove the patch?

Ask the one who sits on the MIUI 10 07/08/17 do you roll back, or put here not modified filessystem \ framework \ services.jar and system \ media \ theme \ default \ powermenu I will gather

Post has been editedFishbond - 09.08.18, 21:46



Rep: (5)
Is there a patch on miui 10 to the camera from the lock screen does not turn on when you double-press the power button?



Rep: (22)
Changing the country code (country code) Wi-Fi AC 5Ghz range {ROOT}

Author : Collected spaces of the Internet and adapted to udobovareniya.
Firmware : GS 9.5.19.0 (OEIMIFA) / deodeks, but should work on other deodeksirovannyh. ROOT is required.
Description :
Our Xiaomi Redmi Note 5 in the range of Wi-Fi 5GHz sees not all the channels could. The range of permissible in this area determines the frequencies the phone after reading from a SIM card country code when it is initialized. Therefore, to view Wi-Fi channels 149-165 in Belarus, for example, is not enough to change the region for enhanced phone settings, such as Venezuela or the United States. Wi-Fi, he sees, but after the phone reboots, or rub a network or stand-alone mode the phone again considers the country code and disable the extended range by turning the Wi-Fi on the local (allowed).
To prevent this from happening, you need to make the desired region for us (good US) file /system/framework/wifi-service.jar. After that, the region received from the SIM card will be ignored. Ready modified file can be downloaded from the link at the end of the post. Proceed.

1. Make a backup of partition System;
2. Put the file manager downloaded file wifi-service.jar in the folder / system / framework / with replacement;
3. Set a right to it, "the letter D" (the same as in neighboring files);
4. Reboot in rekaveri, cache cleaning and doing dalvik cache, load the phone. The first launch will take longer than usual. Done!


For others, such devices, or to change to another, different from the US region, instruction on self-change file wifi-service.jar:

It is necessary:
1. Download and install the programBatch ApkTool (Post by bursoft # 30280158)
2. Copy of phone System folder, even though the file manager, even through the ABD, or get it from the archive with deodeksom for your Smart;
3. Copy the contents of the System folder to the folder smartphone _system program;
4. Copy the contents of the folder System / framework smartphone _framework folder program;
5. Put the file system / framework / wifi-service.jar from the smartphone to a folder _INPUT_JAR program.
6. Adjust the program as the image below (see. Below "ext. Screenshots").
84 - API choice in accordance with your version of Android;
87 - to gather in expert mode - YES;
88 - Remove debug information - YES;
89 - To sign the APK result - NO.
7. decompile our wifi-service.jar command "06"
8. Go on the way BatchApkTool \ _INPUT_JAR \ wifi-service \ smali \ com \ android \ server \ wifi and open the file with a text editor WifiServiceImpl.smali.
9. Find the line data:
.method public setCountryCode (Ljava / lang / String; Z) V
.registers 9

const-string / jumbo v2, "WifiService"

new-instance v3, Ljava / lang / StringBuilder;

invoke-direct {v3}, Ljava / lang / StringBuilder; -><init>() V

const-string / jumbo v4, "WifiService trying to set country code to"

invoke-virtual {v3, v4}, Ljava / lang / StringBuilder; ->append (Ljava / lang / String;) Ljava / lang / StringBuilder;

move-result-object v3

invoke-virtual {v3, p1}, Ljava / lang / StringBuilder; ->append (Ljava / lang / String;) Ljava / lang / StringBuilder;

move-result-object v3

const-string / jumbo v4, "with persist set to"

invoke-virtual {v3, v4}, Ljava / lang / StringBuilder; ->append (Ljava / lang / String;) Ljava / lang / StringBuilder;

move-result-object v3

invoke-virtual {v3, p2}, Ljava / lang / StringBuilder; ->append (Z) Ljava / lang / StringBuilder;

move-result-object v3

invoke-virtual {v3}, Ljava / lang / StringBuilder; ->toString () Ljava / lang / String;

move-result-object v3

invoke-static {v2, v3}, Landroid / util / Slog; ->i (Ljava / lang / String; Ljava / lang / String;) I

invoke-direct {p0}, Lcom / android / server / wifi / WifiServiceImpl; ->enforceConnectivityInternalPermission () V

iget-object v2, p0, Lcom / android / server / wifi / WifiServiceImpl; ->mLog: Lcom / android / server / wifi / WifiLog;

const-string / jumbo v3, "setCountryCode uid =%"

invoke-interface {v2, v3}, Lcom / android / server / wifi / WifiLog; ->info (Ljava / lang / String;) Lcom / android / server / wifi / WifiLog $ LogMessage;

move-result-object v2

invoke-static {}, Landroid / os / Binder; ->getCallingUid () I

move-result v3

int-to-long v4, v3

invoke-interface {v2, v4, v5}, Lcom / android / server / wifi / WifiLog $ LogMessage; ->c (J) Lcom / android / server / wifi / WifiLog $ LogMessage;

move-result-object v2

invoke-interface {v2}, Lcom / android / server / wifi / WifiLog $ LogMessage; ->flush () V

invoke-static {}, Landroid / os / Binder; ->clearCallingIdentity () J

move-result-wide v0

iget-object v2, p0, Lcom / android / server / wifi / WifiServiceImpl; ->mCountryCode: Lcom / android / server / wifi / WifiCountryCode;

invoke-virtual {v2, p1}, Lcom / android / server / wifi / WifiCountryCode; ->setCountryCode (Ljava / lang / String;) Z

invoke-static {v0, v1}, Landroid / os / Binder; ->restoreCallingIdentity (J) V

return-void
.end method

If you have a register 8, then change it to 9 if there was a 9 - then put 10. Etc.
Under the lineconst-string / jumbo v2, "WifiService"insert rowconst-string / jumbo v5, "US"
In this line, writev5If you have had a register 8,v6- if there was a = 9, etc.
Further, even in the two places are located in the linesp1and change it tov5orv6depending on your former value register.
Ready code changes are highlighted in red:
.method public setCountryCode (Ljava / lang / String; Z) V
.registers10

const-string / jumbo v2, "WifiService"

const-string / jumbo v6, "US"

new-instance v3, Ljava / lang / StringBuilder;

invoke-direct {v3}, Ljava / lang / StringBuilder; -><init>() V

const-string / jumbo v4, "WifiService trying to set country code to"

invoke-virtual {v3, v4}, Ljava / lang / StringBuilder; ->append (Ljava / lang / String;) Ljava / lang / StringBuilder;

move-result-object v3

invoke-virtual {v3,v6}, Ljava / lang / StringBuilder; ->append (Ljava / lang / String;) Ljava / lang / StringBuilder;

move-result-object v3

const-string / jumbo v4, "with persist set to"

invoke-virtual {v3, v4}, Ljava / lang / StringBuilder; ->append (Ljava / lang / String;) Ljava / lang / StringBuilder;

move-result-object v3

invoke-virtual {v3, p2}, Ljava / lang / StringBuilder; ->append (Z) Ljava / lang / StringBuilder;

move-result-object v3

invoke-virtual {v3}, Ljava / lang / StringBuilder; ->toString () Ljava / lang / String;

move-result-object v3

invoke-static {v2, v3}, Landroid / util / Slog; ->i (Ljava / lang / String; Ljava / lang / String;) I

invoke-direct {p0}, Lcom / android / server / wifi / WifiServiceImpl; ->enforceConnectivityInternalPermission () V

iget-object v2, p0, Lcom / android / server / wifi / WifiServiceImpl; ->mLog: Lcom / android / server / wifi / WifiLog;

const-string / jumbo v3, "setCountryCode uid =%"

invoke-interface {v2, v3}, Lcom / android / server / wifi / WifiLog; ->info (Ljava / lang / String;) Lcom / android / server / wifi / WifiLog $ LogMessage;

move-result-object v2

invoke-static {}, Landroid / os / Binder; ->getCallingUid () I

move-result v3

int-to-long v4, v3

invoke-interface {v2, v4, v5}, Lcom / android / server / wifi / WifiLog $ LogMessage; ->c (J) Lcom / android / server / wifi / WifiLog $ LogMessage;

move-result-object v2

invoke-interface {v2}, Lcom / android / server / wifi / WifiLog $ LogMessage; ->flush () V

invoke-static {}, Landroid / os / Binder; ->clearCallingIdentity () J

move-result-wide v0

iget-object v2, p0, Lcom / android / server / wifi / WifiServiceImpl; ->mCountryCode: Lcom / android / server / wifi / WifiCountryCode;

invoke-virtual {v2,v6}, Lcom / android / server / wifi / WifiCountryCode; ->setCountryCode (Ljava / lang / String;) Z

invoke-static {v0, v1}, Landroid / os / Binder; ->restoreCallingIdentity (J) V

return-void
.end method

10. Save and close the file. The window BatchApkTool press "07" to recompile (reassembly) our wifi-service.jar.
11. Taking our modified wifi-service.jar in _OUT_JAR folder and execute the instructions on the items from the beginning of Lent.
Add. screenshots
Attached Image
Attached Image

Installation : Manual (required to back up System section)
Download :
Ready file with the changed region in the United States:Attached filewifi-service.jar(578.93 KB)

The original file from deodeks firmware 5.9.19:Attached filewifi-service.jar(725.44 KB)

All that you do, do at your own peril and risk!

Since this modification was not yet here, I recommend to raise the cap threads.

Picture


Post has been editedDima_Apatity - 11.08.18, 12:39
Reason for editing: In the header



Rep: (4566)
M
The curator of the topic is appointedDima_Apatity . Please love and respect!



Rep: (1299)
Dima_Apatity @ 7.08.18, 17:38*
A grid is in the cap, it is common for the nines, regardless of firmware model.
and to the article 10 is also suitable, tested

Posted on 08/11/2018, 23:09:

vezhliviy @ 10.08.18, 22:02*
Is there a patch on miui 10 to the camera from the lock screen does not turn on when you double-press the power button?
so in the settings can be turned off or changed to another command



Rep: (77)
Easy Lock - Double tap status bar / nav bar to sleep

Screenshot
Attached Image
Attached Image
Attached Image

Description : Dim the display of the smartphone, sending it into hibernation mode double touch of the screen.
application options
Double tap anywhere to lock - enable screen-saver mode by double-tapping it in any place. Leaving him without a mark, you can send your smartphone or tablet to sleep only when you double-tap the navigation bar or statusbara;
Avoid lockscreen touches - avoids the operation at the touch of the lock screen;
Avoid softkey touches - it allows you to include a mode in which the application is to avoid false alarms by pressing the on-screen navigation buttons Android system;
Support Lollipop Smartlock - enables / disables support for the regime smart unlock your smartphone or tablet when connected to a trusted device that was first introduced in Android 5.0 Lollipop
Start the service then device boots up - (default) allows you to enable auto-Easy Lock Mode when you turn on your device
Show App Notification - to enable or disable Easy Lock tiles in the curtain notifications system.

Requirements : Android 4.0 and above, the presence of ROOT
In Android, 8 and above does not work double-tap in the status bar will only double-tap anywhere or double-tap on the desktop.

A source : XDA

Link to download :
Version 1.3 - Attached fileEasyLock_v1_3.apk (1.34 MB)


Picture


Post has been edited~ WaRk ~ - 15.08.18, 00:22
Reason for editing: correction of translation



Rep: (410)
there are tools to make our navigation panel transparent. set custom navigation bar, but the program has not coped


Full version    

Help     rules

Time is now: 13/07/20, 14:49