XGIMI SS Aurora [Android] | [Projector] [DLP]



Rep: (116)
DiscussionXGIMI SS Aurora
LED / DLP
Discussion пїЅ
Specifications
Portable projector.
Optical Resolution: 1280x720 (720p) (Resolution Support 1080P, 2K, 4K only H265 codec)
Technology: DLP
Light source: LED
Support 3D: Yes
Brightness: 350 lumens
Contrast ratio: 5000: 1
Diagonal projection: 40-200 inches
Processor: MSD6A638 Cortex-A53, 64-bit, 4 cores, 1.5 GHz
RAM: 1Gb
Internal Memory: 16Gb
HDMI input: Yes
USB: There are 2 USB2.0 ports
WiFi: 2.4 / 5 GHz 802.11a / b / g / n / ac
Bluetooth: 4.0 BLE
Sound: Built-in JBL surround sound system (the ability to work as a Bluetooth speaker)
Battery: Built 20000 mah (battery life time of the projector to 8 hours)
Operating system: Android 5.1.1

Noise:<30 dB
Power: 35-55W

Size: 138 * 135 * 119 mm
Weight: 1.5 kg
A photo
Attached Image


Useful


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedmihadom - 06.09.18, 08:10
Reason for editing: Russification settings menu xgimi cc aurora



Rep: (116)
pavel_s @ 14.08.18, 17:15*
I tuner dvb-t2 wifi h264 stream is - the picture slows down.


Slows down due to the speed of WiFi. It is necessary for 800.11ac (2.4 + 5GHz) connect.



Rep: (7)
Alexx99 @ 15.08.18, 12:21*
Slows down due to speed WiFi

not
It slows because the program In Use SW decode on a single core.
Nothing to do with WiFi.



Rep: (116)
pavel_s @ 16.08.18, 15:28*
It slows because the program In Use SW decode on a single core.


Well, what are you talking about. Nobody there SW decoding uses.
The projector is used only MSTARovskie libs support HW decoding.

Specification chipset can see here:http://www.lcdfans.com/192.html



Rep: (116)
And what have the DVB-T2 receiver that the projector is not?
You have an external device that does not belong to any side to the projector. And that the output should give video via HDMI.
He was there on the Wi-Fi broadcast and in what form we do not know.



Rep: (116)
ATTENTION! All of the following operations you do at your own risk.
Your suggestions please send a PM.


After a wonderful vacation and razgrebaniya workers affairs, reached his hands up to the projector.
So catch the action on rasKitaivaniyu XGIMI CC Aurora
Done once and for all (zaKitait projector back at any time).
Step 1 (Preparation of the firmware)
Installing firmware International.
Download the firmware:https: //s3.amazonaws.c..._087B_MONET_WMP_EN.bin
GIMI_087B_MONET_WMP_EN.bin file rename in GIMI_087B_MONET_WMP.bin
Write GIMI_087B_MONET_WMP.bin on a flash drive, pre-format it to FAT32

Step 2 (Installing the English firmware)
Connect the USB flash drive into the projector
Go to the settings menu
Choose the menu System
Choosing a menu update
Attached Image

Choose to install updates from U disk
We reaffirm update
Attached Image

Reboot and about 7 minutes of waiting
Attached Image


After another restart we get the English version of the projector with the warning window
"Warning This product is not a XGIMI official international version product, so the international firmware is not proper functioning."
Attached Image

This disease, we will treat it.

Step 3 (Patient Treatment)
A warning dialog box hangs for about 5 seconds, then have 5 seconds to perform operations.
Download the v0.2 medicine (located in the post the link):XGIMI SS Aurora [Android] (Alexx99 # 77615086 Post)

Write to the stick xgrake.apk
Open and confirm installation xgrake.apk
Attached Image

Attached Image

After installing the app open xgrake
Attached Image

In the list that appears, select the A511 model at International or A111 to set the Chinese model of projector.


Post has been editedAlexx99 - 06.10.18, 17:20
Reason for editing: change the link to the drug.



Rep: (149)
Russification settings menu xgimi cc aurora
1. Rutirovat projector set RootExplorer
2. Save the fileMSettings.apka USB flash drive and insert it into the projector
3. The system / app / MSettings arm64 folder to delete the folder and file MSettings.apk
4. Copy with flash MSettings.apk in system / app / MSettings folder and set the right rw-r-r
5. Edit build.prop changing the locale on the ru-RU
6. Restart the projector
All manipulations are you doing at your own risk

Post has been editedAleksStarx - 05.09.18, 19:40



Rep: (9)
* Alexx99,
You can add to Z6?
Model: F111 on the Chinese stands.



Rep: (116)
Owners of other models XGIMI try to start a cure for Aurora (xgrake.apk) and see if it displays the device code. In general, start there ....
On the button A111, A211, A311, A511, do not press. Just run and turn.

If China does not see firmware .apk file, just rename it or set .apk1 through adb install



Rep: (0)
Can we use it for xgimi z6. Please do this for xgimi z6. Thank you.



Rep: (9)
* Alexx99,
Z6 runs
Attached Image



Rep: (116)
izyAlex @ 08.09.18, 15:09*
Z6 runs


Fine. It remains to find out the code International model and the trick is done!
On Monday perekompilit and add code to Z6



Rep: (1678)
* Alexx99,
Not sewn, for a moment a red cross, and all goes to reboot



Rep: (9)
* Alexx99,
Change the first letter, I will test for weeks.



Rep: (3)
Alexx99,
On XGIMI H2 AURORA xgrake.apk starts and gives the following

Attached Image



Rep: (0)
Hi all, how to restore the original firmware in Chinese xgimi Aurora cc, the system does not enter, format the flash drive to fat32 threw firmware (GIMI_087B_MONET_WMP.bin), click on the button to the left and to the right, the picture appears the starry sky and the X, quickly shows the stick with a cross and again starry sky with x and all zero attention, can push something wrong? such as rebuilding was another kind of combination. I am worn out already. Really need help!



Rep: (122)
* Alexx99, thanks for the work!

I solve a similar problem for Xgimi H1, followed in your footsteps, found in services.jar identifier H1 International (XgimiModelName = 1311) in my hands H1 Chinese (XgimiModelName = 1111).

On a flash drive in MPOOL section (mmcblk0p2) I found this option. Do I understand correctly that there is enough to change XgimiModelName = 1111 XgimiModelName = 1311 so that it no longer display a window with a warning? Or is there some other tricks?

And please - your program run on my device, displays the identifier (1111). Can you add to the list of codes for H1 (1111 to 1311), to his hands there every time not to climb?



Rep: (116)
Sha-man @ 02.10.18, 15:12*
Can you add to the list of codes for H1 (1111 to 1311), to his hands there every time not to climb?


I think this is the right decision. There step right step to the left - you can get a brick.
I will try to do tomorrow. That is, the Chinese ID: 1111, international ID: 1311?

ID stored in the system variables of NAND, in an area that does not alter even recovery.

Post has been editedAlexx99 - 02.10.18, 17:54
Reason for editing: added.



Rep: (122)
Alexx99 @ 02.10.18, 16:53*
That is, the Chinese ID: 1111, international ID: 1311?

Exactly.

Alexx99 @ 02.10.18, 16:53*
ID stored in the system variables of NAND, in an area that does not alter even recovery.


Yeah, but you can get into the hands everywhere :)



Rep: (116)
Sha-man @ 02.10.18, 17:58*
Yeah, but you can get into the hands everywhere


Can climb. But you describe the situation. For example in this field may be CRC parameters, which is converted only when there through circulation API spec.
Changing there is something you can easily manually shlopotat brick :) And so on. One hundred times measure - cut once :)



Rep: (12)
Another would be for H2 (Aurora) to add the codes, it would be well, all super! As I understand it, a simple firmware for H2 and N2Avrora one. Codes, respectively, is also the same. Above the screen there is a thread with the launch of the drug in the H2 Aurora, there just is a Chinese identity. Tell me, where you can find international? Probably the easiest and most correct option is to run the drug internationally H2?


Full version    

Help     rules

Time is now: 30/08/20, 20:22