> Important!

We strongly recommend to familiarize withRules section "Android - devices"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Asus ZenFone 5 ZE620KL / 5Z ZS620KL - Accessories | Smartphone, 6.2 "



Rep: (2160)
Accessories forAsus ZenFone 5 ZE620KL / 5Z ZS620KL
PictureAsus ZenFone 5 ZE620KL / 5Z ZS620KL
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Marriage and Repair пїЅ | Firmware пїЅ | Camera talk пїЅ | Modification and decorations пїЅ | Owners Club пїЅ

  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Covers and bumpers
Glasses and films
miscellanea


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedgyord - 05.09.19, 12:11
Reason for editing: Will the cable or tapeC-HDMI adapter work



Rep: (27)
The case is inexpensive, normalhttps: //www.aliexpress....08.99999999.262.Jitu8z



Rep: (119)
* klon45, This is a bumper, the cover should close the screen



Rep: (27)
hdd007 @ 05.13.18, 17:56*
This is a bumper, the cover should close the screen

Xs how to call, look at the shops CSN, CITY .. etc everywhere in different ways, where is the case, where is the bumper, so no matter what, for me, this is the case, and the bumper is for me when it's from the end of the cover)))))



Rep: (4)
Klon45 @ 05.13.18, 22:54*
The case is inexpensive, normal
I am waiting for this already, it is already underway in Russia



Rep: (4)
Klon45 @ 05.13.18, 15:54*

Dressed in this. Looks great. True smart in it is thicker than in the native, as a result, it enters into the holding device on the car with pressure.



Rep: (94)
Today I got this case. Very similar to the complete. The thickness is the same, only there are no these foolish holes for the buttons and for the sensor of prints a hole is bigger. I warn everyone to buy this one right away. Due to the fact that the flash hole is small, one side is exposed in the photo, you will have to remove the cover.
Screen
Attached Image

http://s.aliexpress.com/qU3aiQBr

Post has been editedwolfhound81 - 14.05.18, 18:17



Rep: (4)
I bought such a film for a while in the CSN, while the glass was flowing with Ali. Film from Redmi Note 4 for 150 rubles. Lay down almost like a native, 95% docked. Cuts nothing.

Attached images
Attached Image


Post has been editedXidwbiX - 14.05.18, 22:32
Reason for editing: Added



Rep: (2160)
M
Topic moved to subsectionDevice accessories



Rep: (27)
I ordered this glass, I'll get a photo
https: //www.aliexpress....311.0.0.3fac33edOUyw9k



Rep: (97)
Order here the bumper.

Very comfortable, snug fit, non-slip and most importantly deshovy.
Attached Image

Attached Image

The camera does not bulge
Attached Image

The cover ordered on April 25 came on May 13


Post has been editedcrazyneocrazy - 16.05.18, 15:48
Reason for editing: Completed post



Rep: (4)
* crazyneocrazy , order, please, the camera does not bulge out of the bumper and how much did he go to you?



Rep: (101)
And I received a hydrogel film, though for the time being at 3 Zen, but from the same seller goes to 5th Zen, today I'll try



Rep: (415)
* kaljaba ,
here is such a film?
Attached Image



Rep: (101)
* coolperec,
Yeah. It is hydrogel.
Mixed feeling, the first is a hemorrhagic with a sticker. I re-stick a bunch of different films and glasses. But this, it is thin and soft. I usually rubbed bodies whisked all the dust particles, deprotected tselyus and glue quickly that would have taken nothing. Then you need to pull out of the top, stick the bent portion of protection, and the whole thing smooth here vpoymat mote chance 500% more than in the gluing of ordinary glass or film. Write it in the negative, as not all can normally without bubbles or debris sticking conventional film or glass, and this all the more so.
The second when sticking and opening were stripes and air bubbles, because the film is really soft and stretches. At first I was horrified, but then I thought that maybe like on ordinary films in a couple of hours or a day, all the tiny bubbles dissolve. And yes, 80% is gone in the evening.
The second disadvantage is that it is really thin soft and stretches. This is bad, because firstly I think it will quickly get stuck, and secondly, when asphalt falls on stones, it will not be able to take over the load and distribute it over the entire area, but simply pass it on to the screen, and with pressure on the screen, for example, in the bag with keys or something sharp again, will not be able to take the load and distribute as it makes this glass or thick film. This is a minus.
Now the pros, because it is thin and soft, she lay like a second skin, with 98% of the screen is closed, even where the screen is rounded she also repeated shape until the end, I look at the phone that there is a film with mind that there is not distinguish so well lies. She has aleofobka, the first glass was simple fear to touch lasted, all divorces from fingers, the second with a black border around the perimeter, aleofobka super just like oil, even fingerprints no choice, and if they take fat hands then immediately erased easily, but it was enough for 2 months now non-slip and remain the fingers.
This smooth film glides well and the fingers do not stay, let's see how much is enough.
Unlike glass with a black frame that is glued only around the perimeter, the film is completely transparent and there is no gasoline. The glass in the middle was not glued and on the inner side there was a grid for better sensor performance, so with artificial light there was gasoline, and in the sun the screen faded. With this film in general, everything is OK, the transparent screen has become juicier and much brighter, especially when directly hit by the sun.
The question remains as to how it will protect and how long it will be enough to remain as smooth and not wiped.
The result is for those who och carefully handles the body and does not drop it, but who constantly throws the bodies on the table, and even with the screen down, who constantly drops the phone from the hands, I do not advise.
Photo phone lay in the evening.

Post has been editedkaljaba - 17.05.18, 09:07



Rep: (415)
I asked about the company hydrogel? such as in the photo?
But this one is thin and soft. I usually rub the bodies I brush away all the dust particles, take off the protection, aim and glue, so that nothing would quickly fall. Immediately you need to tear off the upper part, stick to bend part of the protection, and smooth the whole thing here to grab the mote of chances of 500% more than when gluing ordinary glass or film. I will write this down to a minus, since not everyone can normally glue ordinary film or glass without bubbles and debris, but this one is so even more so.
The second when sticking and opening were stripes and air bubbles, because the film is really soft and stretches. At first I was horrified, but then I thought that maybe like on ordinary films in a couple of hours or a day, all the tiny bubbles dissolve. And yes, 80% is gone in the evening.

The film is really excellent, all the problems and disadvantages are from the wrong approach to the label of the film. I watched a lot of videos on the hydrogel label and eventually did it my way.
glued to dry, according to the principle of loops as for glass sticker, removed only the first yellow protective, the second yellow only after smoothing. the result: no rubbish or stripes or bubbles.



Rep: (101)
* coolperec,
HZ here is the linkhttps: //www.aliexpress....311.0.0.228133ed7owT1V
I threw the packaging.
Kleil on the dry, first tore off the upper piece glued and smoothed it, then glued and smoothed, and where the stop was made, the seam was out of thin air, the strip, and it did not smooth even through the second yellow one, as a result 90% of the air had already resolved, soon the rest will leave.
I have nothing to choose from, on the 3rd Zen there is no choice at all.
On the 5th I ordered this one
https: //www.aliexpress...&productId=32863750893

Posted 05/17/2018 10:11 AM:

About the sticker, okay, questions remain about the vandal resistance of both the film itself and the screen protection.
That's how much the film will live and not get stuck, an open question
But about the protection and so it is clear, purely for neat people, it will protect the screen from scratches, but not from falling.



Rep: (415)
* kaljaba ,
here (IMHO) the most normal hydrogel
I have just ordered it, but I’ve been using this company’s hydrogel for a long time.
Attached Image


Imak ATP Asus ZE620KL Screen Full Cover Hydrogel II Protective Film for Asus Zenfone 5 5z ZE620KL ZS620KL not glass
http://s.aliexpress.com/NbQnAFzA?fromSns=Copyto Clipboard



Rep: (10)
Klon45 @ 05.13.18, 15:54*

This came to me a week ago, an excellent case. I like it not as an example more than from the kit.
And how are you such art?https: //www.aliexpress...dcf2&priceBeautifyAB=0



Rep: (101)
And here is the photo, the reptile either did not want to focus on the brilliant phone

Attached images
Attached Image
Attached Image
Attached Image



Rep: (5)
It looks good. Appearance does not spoil. I ordered myself


Full version    

Help     rules

Time is now: 08/04/20, 2:01