Archer C2 (AC750) Dual Band Wi-Fi Gigabit Router with 802.11ac Wireless Support
Interface: 4 10/100/1000 Mbps LAN ports 1 10/100/1000 Mbps WAN port 1 USB 2.0 port Buttons: WPS / Reset button Wireless On / Off Button (Turn on / off wireless broadcast) Power on / off button (Power On / Off) Antenna: 2 dual band antennas External power supply: 12V DC / 1.5A Sizes (ShhDhV): 230 x 144 x 35 mm Antenna Type: Two dual-band removable antennas (RP-SMA connector)
PARAMETERS OF WIRELESS MODULE
Wireless standards: IEEE 802.11ac / n / a 5 GHz IEEE 802.11n / g / b 2.4 GHz Frequency range (receive and transmit): 2400-2483.5 MHz 5150-5350 MHz 5650-5725 MHz Transmission channel width: 5 GHz: up to 433 Mbps (only if the client device has the 11AC wireless adapter); up to 150 Mbps when working with 11N standard adapters; 2.4 GHz: up to 300 Mbps Sensitivity (reception): 5 GHz: 11a 6 Mbit / s -91 dBm 11a 54 Mbps: -74 dBm 11ac HT20: -66 dBm 11ac HT40: -64 dBm 11ac HT80: -61 dBm 11n HT20: -71 dBm 11n HT40: -69 dBm 2.4 GHz: 11g 54M: -74 dBm 11n HT20: -72 dBm 11n HT40: -69 dBm EIRP (wireless signal strength): <20 dBm or<100 mW Wireless features: Enable / Disable Wireless Broadcast, WDS Bridge, WMM, Wireless Connection Statistics Wireless network protection: Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK
There is no curator in the subject. For questions about filling the caps, contact the author in the QMS or the section moderators via the buttonA complaintunder the messages. How to do it right, what would you understand the first time, well describedhere.
put the router in the script at any location, such as / usr / sbin /, usbreset_static ... can be a little more? Considering that all mapnipulyatsii occur through the air with the android. Make the script executable, correct script (write data usb whistle, they can be viewed by running usbreset program) similarly ..... in the crown add the script to perform every 10 minutes and it is also ......
I already have Padavan 1. Downloading the file Attached fileupdate.zip (6,79 РњР‘)
2. We pull out from the archive update.bin 3. We verify the hash update.bin - MD5: D42AA9BD3D981EDCE878E20D087295D6 4. Go to the web interface of the router 5. Administration>Firmware update 6. Select the update.bin file and click send.
so did all the constant reboot, tell me how to fix?