> Important!

We strongly recommend to familiarize withRules section "Android - devices"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Asus ZenFone Max Pro (M1) ZB602KL - Discussion Archive | Smartphone, 6 "



Rep: (2236)
ArchivediscussionsAsus ZenFone Max Pro (M1) ZB602KL
PictureAsus ZenFone Max Pro (M1) ZB602KL
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Marriage and Repair пїЅ | Official firmware пїЅ | Unofficial firmware пїЅ | Camera talk пїЅ | Owners Club пїЅ




Important information
After the update 1808.323 :
Corrected the work of Gpay, now all versions work and 2.71 is the last actual inclusive.
Yandex and Yandex Browser were built into the firmware (this is just compliance with the requirements of the Russian Federation), these 2 applications come only on the territory of the Russian Federation, Ukraine Kazakhstan and others will not receive it.
Unnecessary applications can be turned off with the standard system capabilities (Delete via ADB = Disable via settings)
Also according to reviews corrected the work of Bluetooth multimedia
Fixed network mapping.
Actually it was before 08/20/18 (before the release of update 323)

Known problems bugs at the start of sales:
1) 13% of users had the hang of the smartphone on charge (judging by the logs, it was decided in 318th update) for today (07/25/18) only one complaint of freeze was noticed.
2) there were problems with multitouch in games for 99% of users (resolved with updating 316 )
3) Silent sound through bluetooth headphones (not yet decided and there is no pattern)
4) NFC-payment via Gpay, currently running version 1.59.201354777 88% of people, but there are users who do not have any version. But the payers work Qiwi and Yandex money. Asus knows this problem and promises to fix it in the following updates.
Google response to the problem with the work of Gpay
Asus answer about gpay
Bugs and problems for about 18-20% of the total number of users

Statistics found problems


Specifications
  • Display: 6 inches, 2160x1080 pixels, 18: 9, 404 PPI, contrast ratio 1500: 1, IPS
  • CPU: Snapdragon 636, 8 kernels Kruo 260, 64 bits, to 1.8 GHz
  • Graphics: Adreno 509
  • RAM: 3/4 GB
  • Drive capacity: 32/64/128 GB
  • Front-camera: 8 megapixel, flash, face recognition, viewing angle 85 degrees
  • Main cameras:
  • Primary: 13 Mp, F / 2.2 ‚phase autofocus;
  • Portrait: 5 MP, background blur mode; LED flash
  • Video shooting: 720r / 30 fps
  • 1080P / 30 fps
  • 4K UltraHD / 30 fps
  • Wifi and Bluetooth: 802.11 b / g / n, 2.4 GHz, Bluetooth 5.0
  • Cellular communication: 2G / 3G / 4G LTE
  • Slots: Sim and MicroSD 2x Nano Sim, 1x MicroSD (up to 2 TB)
  • NFC: Yes, with Google Pay support
  • Navigation: GPS, AGPS, Glonass BDS.
  • The fingerprint scanner: Yes, up to 5 fingerprints, fingerprint recognition in 0.3 seconds
  • Face recognition system: Yes
  • Connectors: Micro USB 3.5mm headset jack
  • Battery: 5000 mAh
  • Dimensions: 159x76x845 mm
  • Weight: 180 grams
  • Body materials: Glass and metal
  • Operating system: Android 8.1.0 (with further upgrade to android 9.0)

  • Price
  • modifications: 3 GB / 32 GB - 13 990 rubles
  • modifications: 4 GB / 64 GB - 15 990 rubles
  • modifications: 4 GB / 128 GB - 17 990 rubles

Useful
Reviews and Reviews
Poll results
Wi-Fi issues
Attached Image

Identify patterns on the problem of freezing while charging a smartphone
Attached Image

GPAY Survey
Attached Image



M
This is an archival topic, further discussion is conducted in the topic.Asus ZenFone Max Pro (M1) ZB602KL - Discussion


Post has been editedLexx808 - 03.11.18, 14:21
Reason for editing: Supplement to the rules of purchase / return



Rep: (74)
* Lecorn , thanks to the wifth this phone from the list of recommended, bribed the NFS, but we do not need it without speakers



Rep: (609)
* VRamir,
You do not need, this is your business than to use. I advise you to read the characteristics when buying. To not get caught again.



Rep: (74)
* Lecorn Yes, you are right, but about the fact that the AU fastened it to me was a revelation, I thought that such things were already on the machine after notes5go. It is a pity to buy a friend managed to recommend (((



Rep: (3)
Vramir @ 08/05/2018, 12:36*
But without the speaker, we do not need

Do you have AC fans sect? What to do this in the phone to 2.4 did not cope



Rep: (74)
* s1504 , Just live in the monottenting of the old, where everything is sleeping in the range of 2.4 Hertz, then nothing to ship nothing and change the channel, but you are sitting anyone and all. There is no one and all.

Post has been editedVRamir - 05.08.18, 12:44
Reason for editing: Typo



Rep: (11)
Recently did not make a large test for the compatibility of the charging devices, but it was made "an ambulance hand" and was not quite accurate, because The charge of the phone was more than 70%.

Today I spent everything again, this time the battery was 1-2%, so the test would be more accurate.
So, I started with the fact that I saw a lot of comments that allegedly charged in 2a only with a native charging and a native cable and that some managed to connect to the phone QC 3.0 ... Well ... Wire this myth ...

We take native charging and native cable:
Attached Image

Attached Image

When charging, we see the following:
Attached Image


Now we take the same native charging and not a native cable:
Attached Image

And nothing has changed:
Attached Image


Further we try not to charge and not native cable:
Attached Image

And again the result has not changed:
Attached Image


Connect quick charging Quick Charge 3.0:
Attached Image

The miracle did not happen, the same 5 volts 2 amps ...

And at the end of the test with car charging:
Charging ... QC 3.0 is present.
Attached Image

Connector 2A.
Attached Image

Connector QC 3.0.
Attached Image


Each of the tests on the screen showed a "fast charge":
Attached Image


At the expense of the charge, it did not cut, I also showed 2 and 3 and even 50 hours. I do not know what it is connected with.

Perhaps someone this post will be useful.

Post has been editedZB602KL - 05.08.18, 12:48



Rep: (385)
Vramir @ 5.08.18, 12:43*
Just live in the monottenting of the old, where everything is sleeping in the range of 2.4 Hertz

And we probably, on the caves, you? I have a zoo at home yet. And there are no problems with 2.4.



Rep: (609)
* VRamir,
Show how many channels are crashed



Rep: (3)
Vramir @ 08/05/2018, 12:43*
live in the monotportation of the old, where everything is sleeping in the range 2.4

Actually I live. 12 networks sees the phone. Everything is working



Rep: (385)
S1504 @ 5.08.18, 12:49*
12 networks sees the phone. Everything is working

Times for 20 translates (we have router lovers to turn off - they are saved from radiation).
And nothing. But the 5GHz in the sort of barely plows. 3 walls of everything.



Rep: (3)
After using the bluetooth, after turning off the bluetooth, the Qualcomm APT X codec is not removed in the settings it is written that this type notifications cannot be disabled but after rebooting the device, this notification disappears to the disappearance of the bluetooth chumps in my case. If it is important, how to treat it?



Rep: (108)
Increase WiFi speed (need root)

Find a file /vendor/etc/wifi/wcnss_qcom_cfg.ini.
Open it and find in it lines:

#Channel Bonding
gchannelbondingmode5ghz = 0.


And add a line:

gChannelBondingMode24GHz = 1


This string allows you to work with WiFi 40 MHz width, if the speed remains at the same level, then check the router settings

As a result, we get:
Attached Image
Attached Image


Post has been editedInfestal - 21.12.18, 19:24
Reason for editing: Completed



Rep: (3)
Hello children!)
Faced such a problem thatHeats strongly The screen at the bottom of the phone, maybe someone found how to solve the problem, but I can't find an answer on the forum.



Rep: (406)
TinyRadar @ 5.08.18, 16:41*
Heats high screen at the bottom
What do you do with him?



Rep: (12)
Very strains the sound, such a feeling that a certain limiter works, limiting the volume bursts in the composition, it is this volume in the song becomes some kind of wave-like. Can this be fixed?



Rep: (0)
Do you tell me if the orientation lock is in the phone as in Apple or Xiaomi? I can't find something. The screen is not fixed in horizontal mode, it will always be sure to return to the vertical in some Twitch'e for example, it's terribly uncomfortable.



Rep: (3)
* Kit_Slava,
I just go to the VC or another application for 5 minutes and it is the bottom of the screen that the phone itself is cold. Include the screen and everything cools pretty quickly.



Rep: (5)
Has anyone faced the fact that after switching on and off the night mode, the screen temperature settings are reset? The display temperature slider remains on the cold, and the color becomes like the default (it is clearly noticeable if you adjust the slider to the left and then right).



Rep: (46)
TinyRadar @ 5.08.18, 15:47*
The bottom of the screen is already split

I also encountered this when the brightness is unscrewed more than 50%, when watching a video. The question asked, the answers zero did not pay attention. The type of screen illumination, well, or something there is connected with the screen.

Post has been editedslevin063 - 05.08.18, 14:59



Rep: (3)
* slevin063,
So I noticed that if you cut the backlight less than 50, then everything is adequate ... But with solar weather on such a brightness, little is visible.


Full version    

Help     rules

Now: 03.01.21, 05:08