On the fence, too, a lot of things write. Does not give Masik Unlimited in Googldisk.

wert569 If you know what to do, the backup is not needed. It is enough to just ask for someone who on the stock file Mixer_path.xml, replace it and everything will be good.

And why in patches for the TVP, the VENDOR folder is located separately, and in modules for a Magisk inside the Sysytem folder?
After connecting the module in Magisk, I begin to problems with other programs, for example, with a total commander, starts to brake, swear when the partitions are renovated and the like. and swears on the lips in the module


Post has been editedfizs - 08.01.19, 07:56

How under zero remove the patch completely, deleted through the Major, rebooted the cache in the recovery, then everything cleaned the stock in the chamber itself, the portrait does not work in an etho, the picture does, but when it is displayed, the camera fails.

kolden77,
I stitched the patch through the recovery but it is for Majik
So that the flow camera began to work had to rolling patch again

Posted on 01/08/2019, 10:30:

kolden77,
Yesterday, by the way, renewed Mirum, weekly after I put 2Apy flew but the patch remained
So the option from the top to roll the firmware will not pass

Post has been editedDimix_ - 08.01.19, 10:32

Thanks for the translationkolden77 if possible, I will make some adjustments in the mod
Download:
gen_signed.apk(34.07 MB)


Post has been editedtigr1234566 - 11.04.19, 15:32

Tell me, and everyone starts a video recording after 3-5 seconds after pressing the button?

tigr1234566 , What kind of camera is this? Is this a new mod?

Posted on 01/08/2019, 11:39:

reg60 , not three five but after a couple exactly

opana02071991 yes new, and most likely the best at the moment, because everything works, the portrait works, the front camera is perfect, perfect selfie, everything is perfect

tigr1234566 Yes, I also noticed. Do you have any optimal settings? Or already all exhibited? The camera takes pictures very cool, and everything works very quickly.

I also have a rolling on top without wipes, it does not lead to the same (before installing a patch from the TWRP) state, it is necessary to put it with the format.

Why long is the photo processing from FU? And while this circle is loaded, it is impossible to move with your hands for everything is wondering, but the quality of the pictures is simply canceled, so what is the question: how to speed up this photo load? MB Some settings in the camera to twist?

Guys, help. Comrade Nat 5, global, PCT. Recently, there was a problem with the camera, namely, I quote: "I start the camera, and on the black screen, all the" HDR "labels, the settings are highlighted, and the camera does not display anything, after about a minute it comes to life and everything is fine."
What is the problem?

kolden77 , I understand it, but you can the camera balance, and that the pictures were good and processing, not so long)

And there is a night cut?

kolden77 , I really liked the Camera of the GKAM 6.1, but it is raw, ISO cannot be put, wanted pictures as you wrote "black-meaning black" and noise was less, but more details. Now this will be supplied

I tried the mod so-so, it works not all HDR on the front does not work, and there is no nightly reign.
I have this photo doing super, it is especially affecting a photo with a night dating, front. Do not work, but I am anterior camera photo from the snappragon of the camera.


MGC_6.1.021_BSG_Arnova-based_v.1.2_TlnNeun_Fix.apk(109.65 MB)

Has anyone put a custom kernel with EAS support?
And then they write that with such kernels, processing photo in GKAM passes by about twice as fast

tigr1234566 , Well, this is Arnova mod, or rather at its base, what differences are except for working on PIE?
When compared with the same parameters, the difference is almost no

An example of night photos on pH5 (GKC 6.1, night mode, firmware PE9, 9 Andrei). Came with hands, it was cold, maybe therefore a little lubricant, but on the screen of a smartphone more than worthy for the budget.