Discussion camera Xiaomi Redmi Note 5 (Pro)
. If you have less than 15 posts - click on the button.
under the message where they helped you, and write thanks.
Antonovan, Xiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware
Read and read the whole hat once again, and then sew.
And remember, first backup, then everything else.
Detailed fact on the Google Camera! Especially on the settings. Attention, for Redmi Note 5 (Pro) Mi8 fixes are not suitable, do not install!
18.01.2019. I will add the FAQ, on the basis of their research for Google Camera Xiaomi Redmi Note 5.
9 android! For other versions of Android did not check.
How to include AF tracking on Google chamber version 6, and take a snapshot in the HDR +?
To begin with, we will need to enable ZSL technology (Zero Shutting Lag), which was invented for snapshots, the phone begins to shoot in the buffer immediately after the application is launched, by the way, it was precisely this allowed to implement a tracking autofocus. The camera can use this technology for HDR +, i.e. When you click on the descent button, it chooses several frames from the ZSL buffer, adds new frames and renderite the final picture. In fact, there is no concept of lag shutter. But for this you need to work (Iron HW) Overlay mode, where video information is displayed in a separate area of ​​memory, followed by hardware processing in the color model YUV_420_888.
How to do it:
Go to settings - advanced settings - FIX. Viewfinder format should be YUV_420_888. Init SlowMo with - 120, otherwise it will fail to switch to the high-speed shooting mode 240k / s. Enable Improve in low ligt, color correction rudiments.
Expose the black level in the chamber 64, is a native value of our camera.
The Viewfinder Processing must be enabled mode "Motion" "AE".
Next, go to settings - advanced settings. Turn Motion.
Now the fun part. Configuring chamber configuration. The forum had a lot of questions about it. Go to settings - advanced settings - basic. ZSL technology in the 6th chamber works only on Pixel3. Accordingly, we put in the interface style settings and Pixel3 models like the image below.
Now go to the Camera config. There is nothing to choose. For overlay "Iron" HW configs, only three, and with HDR support + only one - Pixel2017 HW ZSL HDR +. All the rest of the software, in our case it is not interesting. Here and choose it. He, by the way, has proven itself well. More on the first versions of the 6th camera, its software brother Pixel2017 ZSL HDR +, showed the best reference results on our chamber. Recently, Nhappymann has released a patch with new libraries from 08/01/2019 RN5 Camera Patch TWRP V1.135A (PIE 9.0). After that configuration with the HW "Iron" prefix began to work. The new patch does not break the stock chamber.
The latest version of the 6th chamber can even save camera configuration in a xml file. It is stored in the internal shared storage \ GCam \ Configs
Here is a customized configuration for RN5_MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun_2 cameras (currently the latest version)
It is enough to download it and copy of the above mentioned ways. Then start the camera, double click on the black screen area between the buttons and loaded into the camera. Unfortunately frontalka it does not work. Slow shooting started working.
All successful photo!
My phone's configuration:
OS - PixelExperience_whyred-9.0-20190110-0224-OFFICIAL
https: //download.pixel...110-0224-OFFICIAL.zip/
Patch camera - RN5 Camera Patch TWRP v1.135a (Pie 9.0) nHappymaNn on 01/08/2019
https://t.me/rn5cp/128(Referred to in the telegrams)
Camera - MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun_2.apk
https: //www.celsoazeve...camera/f/changelog324/
Post has been editedgeorge_yura - 20.01.19, 16:30
18.01.2019. I will add the FAQ, on the basis of their research for Google Camera Xiaomi Redmi Note 5.
9 android! For other versions of Android did not check.
How to include AF tracking on Google chamber version 6, and take a snapshot in the HDR +?
To begin with, we will need to enable ZSL technology (Zero Shutting Lag), which was invented for snapshots, the phone begins to shoot in the buffer immediately after the application is launched, by the way, it was precisely this allowed to implement a tracking autofocus. The camera can use this technology for HDR +, i.e. When you click on the descent button, it chooses several frames from the ZSL buffer, adds new frames and renderite the final picture. In fact, there is no concept of lag shutter. But for this you need to work (Iron HW) Overlay mode, where video information is displayed in a separate area of ​​memory, followed by hardware processing in the color model YUV_420_888.
How to do it:
Go to settings - advanced settings - FIX. Viewfinder format should be YUV_420_888. Init SlowMo with - 120, otherwise it will fail to switch to the high-speed shooting mode 240k / s. Enable Improve in low ligt, color correction rudiments.
 |
Expose the black level in the chamber 64, is a native value of our camera.
 |
The Viewfinder Processing must be enabled mode "Motion" "AE".
 |
Next, go to settings - advanced settings. Turn Motion.
 |
Now the fun part. Configuring chamber configuration. The forum had a lot of questions about it. Go to settings - advanced settings - basic. ZSL technology in the 6th chamber works only on Pixel3. Accordingly, we put in the interface style settings and Pixel3 models like the image below.
 |
Now go to the Camera config. There is nothing to choose. For overlay "Iron" HW configs, only three, and with HDR support + only one - Pixel2017 HW ZSL HDR +. All the rest of the software, in our case it is not interesting. Here and choose it. He, by the way, has proven itself well. More on the first versions of the 6th camera, its software brother Pixel2017 ZSL HDR +, showed the best reference results on our chamber. Recently, Nhappymann has released a patch with new libraries from 08/01/2019 RN5 Camera Patch TWRP V1.135A (PIE 9.0). After that configuration with the HW "Iron" prefix began to work. The new patch does not break the stock chamber.
 |
The latest version of the 6th chamber can even save camera configuration in a xml file. It is stored in the internal shared storage \ GCam \ Configs
 |
Here is a customized configuration for RN5_MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun_2 cameras (currently the latest version)
RN5_MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun_2.xmlIt is enough to download it and copy of the above mentioned ways. Then start the camera, double click on the black screen area between the buttons and loaded into the camera. Unfortunately frontalka it does not work. Slow shooting started working.
All successful photo!
My phone's configuration:
OS - PixelExperience_whyred-9.0-20190110-0224-OFFICIAL
https: //download.pixel...110-0224-OFFICIAL.zip/
Patch camera - RN5 Camera Patch TWRP v1.135a (Pie 9.0) nHappymaNn on 01/08/2019
https://t.me/rn5cp/128(Referred to in the telegrams)
Camera - MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun_2.apk
https: //www.celsoazeve...camera/f/changelog324/
Post has been editedgeorge_yura - 20.01.19, 16:30
yaserglev999 @ 11.12.18, 12:38
not for our unit. especially liked this instruction:
I'm on the phone has a camera MGC_6.1.021_MI8_V1d our patchDiscussion camera Xiaomi Redmi Note 5 (Pro). Everything works fine, and this factor makes it possible to optimally configure the camera. By the way I have firmware Russian Whyred__V9.5.27.0.OEIRUFA. Naturally without slowed. shooting and frontalki, it still does not work anywhere at the 6th version, for them alone is worth the 5th version of the camera.
Post has been editedgeorge_yura - 11.12.18, 10:55
I decided to continue comparing mods 6.1.013_abc_06_a9 from Al_ro and GoogleCamera_5.2.025-Final_Fu24-17. This time I made a photo on the street. The color saturation set the same (for the illuminated 1.0, for the shadow 1.4).
Al_ro:
FU24:
Mod from Al_ro on the left, mod from FU24 Right:
On these three comparisons it is clear that the mod from Al_ro worked in detail better. But...
As you can see dark places, and in particular the whole foliage, he has drawn, as a result of the foliage of the mod from FU24, it worked much better.
I did not expect such a turn of events) I will test further))
Al_ro:
 |
FU24:
 |
Mod from Al_ro on the left, mod from FU24 Right:
 |
 |
 |
On these three comparisons it is clear that the mod from Al_ro worked in detail better. But...
 |
 |
As you can see dark places, and in particular the whole foliage, he has drawn, as a result of the foliage of the mod from FU24, it worked much better.
I did not expect such a turn of events) I will test further))
Analogue (IMHO best) Google Camera on a device with a locked loader. I use it as an option while waiting for the Bootloader unlocking.
ONEPLUS CAMERA LINK -Oneplus camera
P.S. Comparison of oneplus camera with stock.
P.P.S I apologize for the photo under the table.
I offer a hat.
ONEPLUS CAMERA LINK -Oneplus camera
P.S. Comparison of oneplus camera with stock.
P.P.S I apologize for the photo under the table.
I offer a hat.
Attached images
 |
 |
Stock camera
Post has been editedLecorn - 12.12.18, 01:33
Christmas tree
 |
 |
Temple of all saints in the Earth of Russian asked + h / w
 |
 |
Post has been editedLecorn - 12.12.18, 01:33
Flash88888888 @ 12.12.18, 12:06
On 10.06.0 GS tested someone already patches? What to put tell me.
Talk Camera Xiaomi Redmi Note 5 (Pro) (Post tigr1234566 # 78466539)
Also changed the stock onDiscussion Camera Xiaomi Redmi Note 5 (Pro) (Post Borndead # 79716849)
Post has been editeddjdante - 12.12.18, 12:23
A camera may be launched on this phone.https: //f.celsogenezevedo...a_mod_v.3.4.11_r4x.apk.or//savagemessiahzine.com/Forum/...v.5.1.17_t27_clone.apk.? With such settingsDiscussion Camera Xiaomi Redmi Note 3 Pro (Post Supreme.1996 # 79984311)they make a bias on the detail, on notes3pro and 4x go well
Camera port A2 m fully working Aias if stock.
And the last 6.1.013_MEGA_03_A8_NOT_Clone from Al_ro.
The settings did not change, all by default. View from the balcony.
1. Stock AI
2. Stock HDR
3. STOCK NIGHT MODE
4. Google 6.1 AI
5. Google 6.1 Night Mode
6.1.013_mega_03_a8_not_clone.apk.(99.36 MB)
Post has been editeddjdante - 13.12.18, 20:52
And the last 6.1.013_MEGA_03_A8_NOT_Clone from Al_ro.
The settings did not change, all by default. View from the balcony.
1. Stock AI
2. Stock HDR
3. STOCK NIGHT MODE
4. Google 6.1 AI
5. Google 6.1 Night Mode
 |
 |
 |
 |
 |
6.1.013_mega_03_a8_not_clone.apk.(99.36 MB)Post has been editeddjdante - 13.12.18, 20:52
Photo 1 - ARNOVA'S V8.3B1, included HDR
Photo 2 - MGC_6.1.021_MI8_V1A, Night mode
The photo is almost in complete darkness (not a particularly lit park). Also went snow, the detail was lost.
Post has been editedbodya2539 - 12.12.18, 22:56
Photo 2 - MGC_6.1.021_MI8_V1A, Night mode
The photo is almost in complete darkness (not a particularly lit park). Also went snow, the detail was lost.
 |
 |
Post has been editedbodya2539 - 12.12.18, 22:56
Supplement day shooting
Discussion Camera Xiaomi Redmi Note 5 (Pro) (Post Djdante # 80062109)
1. Stock
2. Google 6.1.
3. Google 6.1 Night Mode
Conclusion One, Google is good at night, stock day.
Discussion Camera Xiaomi Redmi Note 5 (Pro) (Post Djdante # 80062109)
1. Stock
2. Google 6.1.
3. Google 6.1 Night Mode
 |
 |
 |
Conclusion One, Google is good at night, stock day.
The first photo of the ARNOVA GK
Second photo of GK 6
Without processing!
These are cameras that use
In the second photo used night shooting.
Post has been editedVitalya F. - 14.12.18, 02:51
Second photo of GK 6
Without processing!
 |
 |
These are cameras that use
 |
 |
In the second photo used night shooting.
Post has been editedVitalya F. - 14.12.18, 02:51
Djdante @ 12/13/18, 12:30
Conclusion One, Google is good at night, stock day.
Strange conclusion. And what stock is better in the afternoon? Especially your photo seems to be not stock? Judging by the post to which you refer.
Here is the morning photo. With hands, not configuring anything. Not quite light, but already enough for 100 ISO.
First stock HDR, second Arnova 5.1+ Lightrum
 |
 |
crop 100%
 |
Conclusion: the stock is almost not inferior during the day. But still worse in detail. It can be seen as a sea ripple, grass and trees.
The inadequate work of the noise on the drain works even on minimal ISO.
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement