Xiaomi Redmi Note 5 Global / Note 5 China- Unofficial firmware
Poll 04.04 2 rn5.png
RN5 F Camera Patch module v1.0s (3) .zip
BaDiL_ , No. But I'm on the penultimate version of Android on Superior 9 Post has been editedAlexPechkin - 11.11.19, 21:55
AlexPechkin Strangely larger 30MB per second does not rise |
 |
Post has been editedBaDiL_ - 11.11.19, 21:59
pontiakpro, Ask the question, what is the problem and put the watch, second, why are you so try to climb up to the 10, and then scream that there bugs
Post has been editedwowdart - 11.11.19, 22:47
wowdart , Well to begin with, I never cried about it bugs! Well, since no one can say, then take and put Ruslan-dnk , In the sense of not good to lie? I described their use case, subjectively the same as it was described, and it became, in this mode has been working for about a year. If you have a minimum flow rate, it does not mean that I, or someone he will be exactly the same 100%, do not know - do not write.What advise on gallery PE 10. Without built-in gallery and music. player somehow not comfortable ...
ProjectSakura 2.Q
18.09.2020
✔️ Off / Unofficial
S XDA : there is
AVersion of Android: 10
SA source:Telegram
Based upon:LOS
AGoogle Apps: None
PBuild author:DarkStar085 / Vrasteizz & GengKapak
❗️ Known bugs
it is not known if the find - send in the QMS, added to the post
YScreenshots
carefully - in the post 244 screenshots relevant to 07/25/20
Note
Screenshots settings by the way - all in order (not just vnaval as it may sound) - if at this screenshot available drop-down menu with a choice of options - on the next screenshot - these are the most pull-down options, you can immediately see how and what can be changed.
In each post with firmware - has a full set of screenshots - all settings, applications, menyushek, dialers, tiles, curtains, GPS test (the first cold start); WiFi operation (speedtest) taken in the same place; BT work, wired headphones and speakers, and two alternative music. players and if there is a built-in firmware - and then it; and each post can see the time and expense of the battery during test (removal of screenshots, launch applications, benchmarks, music players.), always starting with 100% charge;); and in some positions there are also screenshots of the battery discharge - in the use of time - always discharge from 100% to xx%, Auto-Brightness ON, WiFi.
In each post with firmware - has a full set of screenshots - all settings, applications, menyushek, dialers, tiles, curtains, GPS test (the first cold start); WiFi operation (speedtest) taken in the same place; BT work, wired headphones and speakers, and two alternative music. players and if there is a built-in firmware - and then it; and each post can see the time and expense of the battery during test (removal of screenshots, launch applications, benchmarks, music players.), always starting with 100% charge;); and in some positions there are also screenshots of the battery discharge - in the use of time - always discharge from 100% to xx%, Auto-Brightness ON, WiFi.
first glance
 |
 |
 |
 |
 |
about
 |
 |
 |
 |
 |
OTA - list of changes
Home screen settings
Lawnchair
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
pre-installed software
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
System settings
Battery
 |
 |
 |
 |
 |
Screen
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Sound
 |
 |
 |
 |
 |
 |
Buttons
 |
 |
 |
 |
 |
 |
 |
 |
Status bar
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Rest
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
ext. Settings - Sakura Settings
everything
 |
about the project
 |
 |
Interface
 |
 |
 |
 |
 |
 |
Animations
 |
 |
 |
Quick settings
 |
 |
 |
 |
 |
 |
 |
Lock screen
 |
Gestures
 |
Notifications
 |
 |
 |
sakura OTA
 |
miscellanea
 |
 |
 |
 |
 |
 |
 |
camera
Mi
 |
 |
GCam 7 v12 installed separately - frontalka works 4k videos does not remove
 |
 |
food menu - volume - the volume bar on the left - not working
 |
 |
 |
 |
 |
dialer
 |
 |
 |
 |
 |
 |
tiles
all tiles
 |
 |
 |
 |
 |
BT - connection charge level
 |
 |
 |
 |
 |
 |
notice - lokskrin-blind icons
 |
 |
 |
lokskrin-desktop
 |
 |
 |
 |
GPS
 |
 |
 |
FM
 |
Translation - works, the sound from the TV
 |
 |
 |
 |
 |
WiFi 2.4 & 5GHz 7-8m from the router through two walls
 |
 |
WiFi 2.4 & 5GHz from the router 3-3,5m
 |
 |
just tests
 |
 |
 |
 |
BT juicy, loud, Dual Channel - no, it is transmitted at a call, ringing tone, yes, and in the ears, and in the body; wired ears - a loud, MI, sound does not work; speaker - och.gromko, MI, sound does not work
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Batteries - for the time of testing and removal of screenshots
 |
 |
 |
 |
 |
 |
^ Installation
- We go in TWRP, "Cleaning"
- We carry a full wipe, including format data via the yes (wipe system, cache, data etc ...)
- Reboot again in TWRP
- We go to the "Setup" menu and set the firmware
- After flashing, optional setMagisk/or
SuperSU/ open_gapps-arm64-10.0-2020xxxx - Reboot and enjoy. The first load can be long - 3-5-7 min.
& List of changes
18.09.2020
Rom changelog :
Device Changelog :
• September Security Patch.
• Fixes and upstreams from Lineage.
• Updated Gcam.
• Merged lattest changes from Strombreaker kernel.
• Fix Heating and brightness issue while playing games.
- September Security Patch.
- Fixes and upstreams from Lineage.
Device Changelog :
• September Security Patch.
• Fixes and upstreams from Lineage.
• Updated Gcam.
• Merged lattest changes from Strombreaker kernel.
• Fix Heating and brightness issue while playing games.
17.08.2020
Rom changelog :
We have updated to August security patch and updates will roll out from today
So first up whats new!
Probably the biggest change you will see is the addition of Oneplus Launcher.
Second, will be for FOD supported devices you will see FOD animations and custom icons. The update for this is already rolled out to the devices we support.
Third, We have the support for smart pixels and devices with OLED and AMOLED panels can save battery by using it. Also, do not get your hopes up for LCDs it's just a shiny gimmick for them.
Fourth, Well we added OnePlus launcher so we thought why not add OP switch styles too and we did it.
Moar font styles and a new volte icon
Lastly is secure lockscreen and capabilities to hide power menu and statusbar on lockscreen.
Device Changelog :
- Fixed Bootlooping For Some Users.
- Updated Blobs from jasmine-user-10-QKQ1.190910.002-V11.0.11.0.QDIMIX ...
- Updated Google Camera Go (Now supports front flash).
- Fixed Live display.
- Included lattest Strombreaker kernel (EAS-OLDCAM)
Notes:
• OldCam Build.
• Gapps not included
We have updated to August security patch and updates will roll out from today
So first up whats new!
Probably the biggest change you will see is the addition of Oneplus Launcher.
Second, will be for FOD supported devices you will see FOD animations and custom icons. The update for this is already rolled out to the devices we support.
Third, We have the support for smart pixels and devices with OLED and AMOLED panels can save battery by using it. Also, do not get your hopes up for LCDs it's just a shiny gimmick for them.
Fourth, Well we added OnePlus launcher so we thought why not add OP switch styles too and we did it.
Moar font styles and a new volte icon
Lastly is secure lockscreen and capabilities to hide power menu and statusbar on lockscreen.
Device Changelog :
- Fixed Bootlooping For Some Users.
- Updated Blobs from jasmine-user-10-QKQ1.190910.002-V11.0.11.0.QDIMIX ...
- Updated Google Camera Go (Now supports front flash).
- Fixed Live display.
- Included lattest Strombreaker kernel (EAS-OLDCAM)
Notes:
• OldCam Build.
• Gapps not included
08.08.2020
Rom changelog :
Device Changelog :
Notes:
• OldCam Build.
• Gapps not included
Device Changelog :
Notes:
• OldCam Build.
• Gapps not included
21.07.2020
Rom changelog :
That annoying bug where the navbar buttons stop working in gesture navigation has been fixed (thx to Raj from posp)
The gesture pill is now THICC. Why? BECAUSE THICC = BEST
A BRAND NEW BOOTANIMATION (thx to glitch)
Add new icon shapes from Android R
Blocking sensor for apps is now configurable
Moved the battery icon to header
Device Changelog :
• Switch to QTI bt stack and enable a2dp offload
• Update vendor security patch from Jasmine V11.0.11.0.QDIMIXM
• Updated audio configs
• Change USB autosuspend delay to 7s by commandline
• FPS Info Working
• Added Mi Sound Enhancer
• Switched to InVictusXV-HMP Kernel (Extended-HMP Kernel)
Notes:
• OldCam Build.
• Gapps not included
That annoying bug where the navbar buttons stop working in gesture navigation has been fixed (thx to Raj from posp)
The gesture pill is now THICC. Why? BECAUSE THICC = BEST
A BRAND NEW BOOTANIMATION (thx to glitch)
Add new icon shapes from Android R
Blocking sensor for apps is now configurable
Moved the battery icon to header
Device Changelog :
• Switch to QTI bt stack and enable a2dp offload
• Update vendor security patch from Jasmine V11.0.11.0.QDIMIXM
• Updated audio configs
• Change USB autosuspend delay to 7s by commandline
• FPS Info Working
• Added Mi Sound Enhancer
• Switched to InVictusXV-HMP Kernel (Extended-HMP Kernel)
Notes:
• OldCam Build.
• Gapps not included
! Download
18.09.2020 Official
17.08.2020 Official
Post has been editedAlexXYX - 18.09.20, 22:40
novakk2015, Google photos, it is also built there
If you want something lighter and easier then gallery go
Post has been editedhellgate666 - 12.11.19, 01:19
Good day, members of the forum.
Tried all the firmware on 10 Android and they are all good, but there is a bug at all these firmwares, after a while begins wildly to slow shutter tray and lock screen (currently worth kcuf firmware), while the rest work quickly and smoothly, can anyone knows how to solve this problem?
P.s.Edinstvennoe not tried the line, because it is not found on her franca, and those that were recommended after not getting up ...
Post has been editedKasperJSTS - 12.11.19, 02:08
Tried all the firmware on 10 Android and they are all good, but there is a bug at all these firmwares, after a while begins wildly to slow shutter tray and lock screen (currently worth kcuf firmware), while the rest work quickly and smoothly, can anyone knows how to solve this problem?
P.s.Edinstvennoe not tried the line, because it is not found on her franca, and those that were recommended after not getting up ...
Post has been editedKasperJSTS - 12.11.19, 02:08
KasperJSTS @ 12.11.19, 01:57
after a while begins to slow shutter wildly and lock screen notifications
There may be more to describe the brakes and what you did before the advent of them? Now Sam was sitting on EvoX and confirm your words, I can not, because the firmware behaves perfectly for 10s. I myself have changed the kernel to PureCAF x12, there are no problems.
It should last HavocOS Official 20190929 with the core Kangaroox 4.4. The problem is this: the phone from time to time starts to warm up and inspection processes in the terminal using the top / htop shows two processes system_server which generally consume 200% CPU resources. When you close the process, the system hangs tightly. It helps only restart. Does anyone have any options in what could be the problem?
Post has been editedRam1R - 12.11.19, 06:15
Post has been editedRam1R - 12.11.19, 06:15
Put 10 PE official and not a single bug found, everything works perfectly. Autonomy is slightly worse than miyuay, but only slightly. In general, I recommend
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement