Xiaomi Redmi Note 5 Global / Note 5 China- Unofficial firmware
Poll 04.04 2 rn5.png
CrDroid v5.3
✔ Firmware status: Official
Based on: LineageOS
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: Ruturaj Kadam
& List of changes
changes 05/02/19
What's New -
Wait for MPCTL to start on boot
Compiled with clang 9.0.3
Upstreamed Kernel with tag 4.4.179
Upstream Merged
Wait for MPCTL to start on boot
Compiled with clang 9.0.3
Upstreamed Kernel with tag 4.4.179
Upstream Merged
changes 04/12/19
- Added crDroid Logo to About Phone section
- Correct fpc codes
- Enable Wi-Fi mac randomization
- Enable TARGET_USES_ALTERNATIVE_MANUAL_NETWORK_SELECT
- Added thermal-engine-normal.conf
- Switched to Derp Kernel
- Compiled with clang 9.0.2
- Upstream Merged
- Correct fpc codes
- Enable Wi-Fi mac randomization
- Enable TARGET_USES_ALTERNATIVE_MANUAL_NETWORK_SELECT
- Added thermal-engine-normal.conf
- Switched to Derp Kernel
- Compiled with clang 9.0.2
- Upstream Merged
❗ Bugs
- Unknown
! Download
Post has been editedNeferon - 04.05.19, 08:41
LineageOS 16
✔ Firmware status: Unofficial
DAssembly: 3/22/19
Based on: LineageOS
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: Subhrajyoti Sen
& A new build at Pie FW 9.3.25+!
Assembly: 4/11/19
The note
It will only work on Pie. Therefore, please ensure that you are on the Pie, before flashing this build.
DT2W broken.
Build developer was tested and everything works as it should. But it is also possible that something was up. Therefore, if there are problems please contact the developer.
OTA update for assemblies on the cake until it is.
Changes:
April Security Patch
Blob updates from MiUI pie
Kernel upstreamed with linux-stable
Updated vendor security patch
Sepolicy cleanup
The note
It will only work on Pie. Therefore, please ensure that you are on the Pie, before flashing this build.
DT2W broken.
Build developer was tested and everything works as it should. But it is also possible that something was up. Therefore, if there are problems please contact the developer.
OTA update for assemblies on the cake until it is.
Changes:
April Security Patch
Blob updates from MiUI pie
Kernel upstreamed with linux-stable
Updated vendor security patch
Sepolicy cleanup
Download
& Update on Oreo FW 9.3.14 or lower
Assembly: 4/13/19
The note
It will only work on the Oreo. Therefore, please ensure that you are on the Oreo, before flashing this build.
Changes:
Fix missing sensor
Installation:
• sewn firmware
• sews persist.img (read "like" below)
File
persist.img(32 MB)
We keep in internal storage, Georgia in rekaveri, open a terminal and write:
The note
It will only work on the Oreo. Therefore, please ensure that you are on the Oreo, before flashing this build.
Changes:
Fix missing sensor
Installation:
• sewn firmware
• sews persist.img (read "like" below)
File
persist.img(32 MB)We keep in internal storage, Georgia in rekaveri, open a terminal and write:
dd if = / sdcard / persist.img of = / dev / block / platform / soc / c0c4000.sdhci / by-name / persist
Download
& List of changes:
changes 04/11/19
April Security Patch
Kernel Upstreamed with linux-stable
Deleting files from gallery actually works
Sepolicy rewrite
Kernel Upstreamed with linux-stable
Deleting files from gallery actually works
Sepolicy rewrite
changes 03/26/19
- Enabled OTA
- Synced with LOS Sources
- Dirac (Mi Sound Enhancer) should be fixed now.
- Temporarily removed MiUI camera (was causing a lot of selinux denials).
- Will try to get it back from next build
- Have also enabled support for Hotspot 2.0 and Interworking based on user request. Let me know if it worked
- Synced with LOS Sources
- Dirac (Mi Sound Enhancer) should be fixed now.
- Temporarily removed MiUI camera (was causing a lot of selinux denials).
- Will try to get it back from next build
- Have also enabled support for Hotspot 2.0 and Interworking based on user request. Let me know if it worked
changes 03/22/19
- Support SD exFAT
- Wi-Fi MAC randomization
- Fixed butlup to F2FS
- Working encryption F2FS
- UseTWRP by Mihranfor F2FS
- Wi-Fi MAC randomization
- Fixed butlup to F2FS
- Working encryption F2FS
- UseTWRP by Mihranfor F2FS
changes 03/21/19
- The new framework is based on a tree GuaiYiHu.
- Make a clean installation to avoid problems.
- Fixed inability to add fingerprints.
- Make a clean installation to avoid problems.
- Fixed inability to add fingerprints.
changes 03/20/19
- First build
- Support F2FS
- In the future, it will be added OTA
- Regular Refresh
- Support F2FS
- In the future, it will be added OTA
- Regular Refresh
❗ Bugs
- F2FS assembly of 03/21/19
DInstallation Instructions
HandwithtbutI atwithtbutnaboutattobut:
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware + GApps
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware + GApps
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
Post has been editeddestroyer71 - 30.05.19, 13:31
Reason for editing: in the header
POSP
✔ Firmware status: Official
DAssembly: 3/20/19
Based on: AOSP
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: raj_jdja
& The list of changes: 04.08.19
- We fixed the wake-up delay. Your phone now is always ready and steady to bear your power button abuses.
- The delay fix will actually improve battery backup and squash some laggy bois too!
- We actually merged the April security patches (android-9.0.0_r35) released by Google so you and your device can be secure af.
- Fixed toast theming for a coherent experience on every theme. Now all we need is some butter and cereal for a good breakfast.
- Also fixed the "No service" and "Emergency calls only" text on persistent qs footer. Half readable texts are very bad>:[
- The delay fix will actually improve battery backup and squash some laggy bois too!
- We actually merged the April security patches (android-9.0.0_r35) released by Google so you and your device can be secure af.
- Fixed toast theming for a coherent experience on every theme. Now all we need is some butter and cereal for a good breakfast.
- Also fixed the "No service" and "Emergency calls only" text on persistent qs footer. Half readable texts are very bad>:[
❗ Bugs
- Unknown
DInstallation Instructions
HandwithtbutI atwithtbutnaboutattobut:
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware + GApps
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware + GApps
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
! Download
DOf. page and Sources
Post has been editedNeferon - 08.04.19, 08:22
OxygenOS OB27
changes 03/30/19
• Fixed an issue with the inability to shoot video.
• Returned opportunitycall recording
• Returned opportunitycall recording
Say thank you for the work done -Droid_GuruandSharapa
Post has been editedNeferon - 30.03.19, 17:21
Logo
 |
EvolutionX
• Last update:16.04.2019
• GApps:Embedded
• Created:NAHSEEZ
• Android:9.0 PIE
• XDA:here .
Description
Stable firmware based on AOSP.
"Cool Rom for Cool People."
(Steep steep firmware for users.)
"Cool Rom for Cool People."
(Steep steep firmware for users.)
© EvolutionX
Additionally
Installation method
How to install:
How to upgrade:
- Download the archive with the firmware and throw it in a convenient place for you. Desirably MicroSD / USB flash drive (OTG).
- We go in TWRP.
- Makes cleaning partitions System, Vendor, Data, Cache, Dalvik, the internal memory.
- Install zip-archive with the firmware.
- Optionally, you can install Magisk (Ruth).
- Reboot into the system.
How to upgrade:
- Download the archive with the update.
- We go in TWRP.
- Install zip-archive with the update.
- Optionally, you can install Magisk (Ruth).
- Making Cache purification, Dalvik.
- Reboot into the system.
List of changes
Add Aggressive Battery feature
Add Buttons link to Evo X Settings
Add Extended audio panel tweaks to Sound settings
Allow date / weather to be toggled on while using Q clock style
Disable Flashlight blink on incoming calls by default
Enable auto brightness for Ambient Display
Fix Google Sans & GoBold fonts in clock styles
Fix some Evo X settings default values
Fix wrong text strings in font style chooser for clock / carrier / lockscreen text
Improvements to Network Traffic
Make blur as default lockscreen album art filter
Make lock clock font options dependent if lock clock is shown
Remove power menu background blur
Remove Q clock translations
Update translations (thanks to all translators)
For More ChangeLogs Refer To XDA Thread !!
Add Buttons link to Evo X Settings
Add Extended audio panel tweaks to Sound settings
Allow date / weather to be toggled on while using Q clock style
Disable Flashlight blink on incoming calls by default
Enable auto brightness for Ambient Display
Fix Google Sans & GoBold fonts in clock styles
Fix some Evo X settings default values
Fix wrong text strings in font style chooser for clock / carrier / lockscreen text
Improvements to Network Traffic
Make blur as default lockscreen album art filter
Make lock clock font options dependent if lock clock is shown
Remove power menu background blur
Remove Q clock translations
Update translations (thanks to all translators)
For More ChangeLogs Refer To XDA Thread !!
Download:here
Post has been editedmicky228 - 19.04.19, 07:30
Reason for editing: Updating.
Review the use of firmware Pixel Experience 9 [PIE] [CAF] [OFFICIAL] [WHYRED]
AOSP| CAF |AOSP (Plus Edition)
I have in stock:
Introduction
Before that, I wrotereviewUse Pixel Experience 9 firmware on the Xiaomi Redmi Note 5 (aka whyred), but it was the AOSP version. Ever since the released version CAF, I immediately went over to her. The topic posts often write about the following content: "And what better to put PE: AOSP or CAF?". I hope I'm still able to answer this question. And now the review.
Kastrmizatsiya and interface
Frequenter of the subject knows that the beauty (and for some it is at all minus) Pixel Experience - is the absence of any customization.Guys, if you need customization, stop to read it. Go to HavocOS, Resurrection Remix, crDroid or to Syberia (if someone did not mention - sorry).Pixel Experience you have sewn all. From that moment on your smartphone is not more than dialer and means of egress to the Internet (well, + toys). Maximum of the settings that I found:
... and, it seems, everything.
If anyone remembers, in Pixel Experience Oreo were setting status bar, buttons, and so on - now they moved to Pixel Experience Pie.Soon I'll write a separate review.
It is worth noting that there is now a dark themenearly everywhere. Before dark theme it applied only to the curtain. Now all the rules.
Gestures
As such (as MIUI) gestures available on the system(They seem to be in the RR, crDroid, Syberia and Havoc is).
There are two versions of the navigation bar:
Speed ​​and nucleus
The speed of the system and the vitality of the battery depends not only on the firmware, but also from the core (depending on how it is set up)!
However, there are my personal comments on the cores. For example, in firmware embedded Derp core (as in the assembly of 03.18.2019). At the core of this are often observed mikrofrizy. Almost across the interface. Though you open an application or razblokiruesh screen. Out of habit, I changed the kernel to PureCofee (before PureCAF) - everything was much better. Everything is working smartly and without friezes. Complaints about it not.
Battery
Opinion, of course, subjective, but I dare to write that a bunch of PE + PureCofee lives with me longer than MIUI (Seq. Being used. I have version 10.0.2.0 + that was long ago. Maybe now the situation is better).Again - this is my observation and my schedule use of the device!
If the phone mode 4G + YouTube + Telegram + Music + VKontakte few games, the day missing.
I always say that the vitality of the batteries depends on how the device is used, and after the kernel and the system are (feel like pouring indignation wave :).
By the way, I just stands kernel. I did not put any Kernel Adiutor (Nuu maximum Magisk module - GMS Doze)
About sound
It is believed that the CAF is famous for its sound. I do not know. I did not notice anything. Neither headphones nor in the dynamics. Sound like was normal, and so remained.
The difference between AOSP and CAF
For fun, freewheeling week PE AOSP. No special difference. Well, I did not notice. All work well as both versions.
About OTA update
After updating via OTA stitched a firmware file. No data is deleted (if you do not select "wipe data / cache").
After each update, you have to re-reflash the kernel (if you are worth more), and therefore Magisk.
Other
Get off your firmware is not going to. Rumor has it that the development will be discontinued soon. I do not know where it went, but in the subject have been reports of this type. I think that this is only rumors (I hope so).
Why PE? Google release the software out of the box. I am so much accustomed to Google messages, calendar, dialer, contacts and other things, that another life can not imagine. But this is my opinion. What to install - you decide!
Post will gradually fill up! If you have any comments - write in QMS!
Post has been editedrx1310 - 16.01.20, 01:45
AOSP| CAF |AOSP (Plus Edition)
I have in stock:
- Smartphone - Xiaomi Redmi Note 5 4/64 (Global)
- Unlocked bootloader
- Anti Roll Back (ARB) 4
- Firmware - Pixel Experience 9 (CAF-based)
- Firmware - Oreo (8)
- Recovery -TWRP 3.2.3-0
- Core -PureCofee Latte (EAS)
Introduction
Before that, I wrotereviewUse Pixel Experience 9 firmware on the Xiaomi Redmi Note 5 (aka whyred), but it was the AOSP version. Ever since the released version CAF, I immediately went over to her. The topic posts often write about the following content: "And what better to put PE: AOSP or CAF?". I hope I'm still able to answer this question. And now the review.
Perhaps I will repeat at some point - I apologize in advance. Perhaps for someone these same repetition will be useful.
Kastrmizatsiya and interface
- Possibility to restart in recovery / bootloader (setting is in the mode for developers)
- Subject System Interface (dark or light)
... and, it seems, everything.
If anyone remembers, in Pixel Experience Oreo were setting status bar, buttons, and so on - now they moved to Pixel Experience Pie.Soon I'll write a separate review.
It is worth noting that there is now a dark themenearly everywhere. Before dark theme it applied only to the curtain. Now all the rules.
Gestures
As such (as MIUI) gestures available on the system(They seem to be in the RR, crDroid, Syberia and Havoc is).
There are two versions of the navigation bar:
- Normal version Android (three buttons)
- One button Home, which combines the functions of the buttons "Home", "Recent apps" and "Go to the previous application"
Speed ​​and nucleus
The speed of the system and the vitality of the battery depends not only on the firmware, but also from the core (depending on how it is set up)!
However, there are my personal comments on the cores. For example, in firmware embedded Derp core (as in the assembly of 03.18.2019). At the core of this are often observed mikrofrizy. Almost across the interface. Though you open an application or razblokiruesh screen. Out of habit, I changed the kernel to PureCofee (before PureCAF) - everything was much better. Everything is working smartly and without friezes. Complaints about it not.
Battery
Opinion, of course, subjective, but I dare to write that a bunch of PE + PureCofee lives with me longer than MIUI (Seq. Being used. I have version 10.0.2.0 + that was long ago. Maybe now the situation is better).Again - this is my observation and my schedule use of the device!
If the phone mode 4G + YouTube + Telegram + Music + VKontakte few games, the day missing.
I always say that the vitality of the batteries depends on how the device is used, and after the kernel and the system are (feel like pouring indignation wave :).
By the way, I just stands kernel. I did not put any Kernel Adiutor (Nuu maximum Magisk module - GMS Doze)
About sound
It is believed that the CAF is famous for its sound. I do not know. I did not notice anything. Neither headphones nor in the dynamics. Sound like was normal, and so remained.
The difference between AOSP and CAF
For fun, freewheeling week PE AOSP. No special difference. Well, I did not notice. All work well as both versions.
About OTA update
After updating via OTA stitched a firmware file. No data is deleted (if you do not select "wipe data / cache").
After each update, you have to re-reflash the kernel (if you are worth more), and therefore Magisk.
Other
- Dark theme used for "Digital welfare"
- OTA upgrade work
- Viper4ANDROID works fine
- GAPPS already built into the firmware
Screenshots
 |
 |
 |
 |
 |
 |
 |
About the survey on firmware from Xiaomi Techno Blog
Friend, you have studied the topic. Everyone is aware that Derp has deteriorated to the edge. Of course, this bloody AnTuTu will give such results. I would put KangarooX or Rebirth and after zatestit.Link to video (YouTube)
Conclusion: The study subject!
Conclusion: The study subject!
Get off your firmware is not going to. Rumor has it that the development will be discontinued soon. I do not know where it went, but in the subject have been reports of this type. I think that this is only rumors (I hope so).
Why PE? Google release the software out of the box. I am so much accustomed to Google messages, calendar, dialer, contacts and other things, that another life can not imagine. But this is my opinion. What to install - you decide!
Post will gradually fill up! If you have any comments - write in QMS!
Post has been editedrx1310 - 16.01.20, 01:45
Ceibo Project 1.0
✔ Firmware status: Official
DAssembly: 4/3/19
Based on: AOSP
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: @kjjjnob
& The list of changes: 03.04.19
Statusbar
• Statusbar tuner
• Volte icon toggle
• Show data disabled icon
• Show 4G icon
• Network traffic
Gestures
• OnePlus navigation gestures
• Double tap to sleep on statusbar / lockscreen
• 3 Finger screenshot
Quicksettings
• Show brightness slider
• Brightness slider on bottom
• Adaptive brightness button
• Brightness control buttons
• Show / hide footer warnings
• Quick pulldown
• QS columns, rows and tuner
Buttons
• Volume keys answer
• Volume rocker wake
• Screen off playback control
Navigation bar
• Enable / disable navigation bar
• Navbar tuner
Powermenu
• Screen off power button torch
• Powermenu customizations
Notifications
• Baterry charging light
• Incall vibrations
Lockscreen
• Lockscreen visibility
• Lockscreen charging info
• Face auto unlock toggle
• Lockscreen tuner
Others
• Themes Dark / Black UI, Wellbeing, Updater and obviusly accents
• Allow users to use system themes alongside subs
• AppOps
• Font manager
• Expanded Desktop
• Notification log
• Disable / enable screenshot sound
• Night Light brightness mode options
• Expandable volume
• InstalledApp: show link to Google Play
• Settings: Add package name to installed app details
• Expose the notification log
• Screenrecord inbuilt
• Tiles: Caffeine, Headsup, Screenshot, Volume Panel, Themes, Reboot / Recovery
• And more, you can find and discover
• Statusbar tuner
• Volte icon toggle
• Show data disabled icon
• Show 4G icon
• Network traffic
Gestures
• OnePlus navigation gestures
• Double tap to sleep on statusbar / lockscreen
• 3 Finger screenshot
Quicksettings
• Show brightness slider
• Brightness slider on bottom
• Adaptive brightness button
• Brightness control buttons
• Show / hide footer warnings
• Quick pulldown
• QS columns, rows and tuner
Buttons
• Volume keys answer
• Volume rocker wake
• Screen off playback control
Navigation bar
• Enable / disable navigation bar
• Navbar tuner
Powermenu
• Screen off power button torch
• Powermenu customizations
Notifications
• Baterry charging light
• Incall vibrations
Lockscreen
• Lockscreen visibility
• Lockscreen charging info
• Face auto unlock toggle
• Lockscreen tuner
Others
• Themes Dark / Black UI, Wellbeing, Updater and obviusly accents
• Allow users to use system themes alongside subs
• AppOps
• Font manager
• Expanded Desktop
• Notification log
• Disable / enable screenshot sound
• Night Light brightness mode options
• Expandable volume
• InstalledApp: show link to Google Play
• Settings: Add package name to installed app details
• Expose the notification log
• Screenrecord inbuilt
• Tiles: Caffeine, Headsup, Screenshot, Volume Panel, Themes, Reboot / Recovery
• And more, you can find and discover
Screenshots
! Download
Post has been editedNeferon - 04.04.19, 09:59
 |
Nitrogen OS Stable
fromrahul1982
✔ Firmware Status:Stable
✔ Android Version:Pie 9.0
✔ Google Apps:Absent
✔ Build date:23 July 19
âš¡ï¸ Developer:@xyyx , @ rahul1982 (Collector to whyred)
⚡️Link to the topic XDA: HERE
⚡️Download: HERE
About firmware
AOSP firmware from the Russian team with customization, one of the most famous custom bikes at the Redmi Note 3 Pro at one time, sorry for main developer on the left OnePlus, collected firmware Indian collector under our Whyred, core Derp.
Installation
- We put TWRP
- Making partitions wipe / dalvik / system / cache / data (recommended)
- Reboot the phone and go back to TWRP
- We sew firmware
- sew Gapps
- Reboot into system
List of changes
From23.07.2019
* July security patch
* Latest illusion kernel
* Various NOS upstreams
From6.06.2019
* June Security Patch
* Latest Derp Kernel
* Minor NOS upstream changes
From25.05.2019
* Implemented full gesture navbar
* SmartbarActions: Added media control
* SmartNav: new actions
* Removed aggresive battery
* MiuiCamera updated
* Latest Derp Kernel
* Minor NOS upstreams changes
OTA has been pushed.
From07.05.2019
* May security patch
* The latest version of the kernel Derp
* Minor fixes NOS code
From07.04.2019
* Fixed OTA
* Updated Chinese translation
* Thermal from Pie firmware
From6.04.2019
* April Security Patch
* Launcher3: Restricted the ability to resize widgets when desktop is locked
* Launcher3: Dark Google feed support
* Launcher3: Fixed some glitches when toggling options in launcher settings
* Expanded volume panel
* OP gestures: fix APP switch triggering
* Weather Client improvements
* Theme colors minor improvements and fixes
* Some system animation related fixes
* Latest Derp Kernel
* Fixed adb enabled on boot even if disabled
* NOS Upstream and Minor Improvements
Screenshots
 |
 |
 |
 |
Post has been editedSirQo - 28.07.19, 19:06
Reason for edit: Update from 23.07
Unsubscribe what workson the net 9 [ARB4 + Pie Firmware 9.3.28+ DEV |OSDN| Pie FW Stable |OSDN| 8 Oreo FW 9.3.14 |OSDN]
What other firmware workon the net 9? I have almost all passed.
I mean purely 9 installed version of android, I installed the latest MIUI via fastboot, and then put the recovery vaypal and sewed. Without manually fm and the rest of the updates.
Interested firmware without gapps.
Post has been editedV_POMoSH - 01.10.19, 02:14
accumulated
The spoiler are:
1. Recovery
2. Firmware
The spoiler are:
1. Recovery
2. Firmware
- 1+ Is given: after installing and testing.
- ++Team Win Recovery Project 3.3.1-3 by AlexAnanas |AlexAnanas | savagemessiahzine.com [support 9 and 8 Oreo Pie]
- +TWRP-20190330-3.2.3.0-whyred.img by GuaiYiHu |AFH [with MoKee resource]
- xtwrp-3.3.1-0-whyred.img |twrp.me-eu | twrp.me-en [OFFICIAL | You can not see the flash drive and there is no connection to a computer]
- twrp-3.3.0_whyred-pie.img by kapiljhajhria |AFH
- +twrp-3.3.1-1-whyred.img by AnkitGourav |AFH
- ++OrangeFox |Orangefox | XDA | savagemessiahzine.com [support 9 and 8 Oreo Pie]
- ++PitchBlack |SF | PBRP | savagemessiahzine.com [support 9 and 8 Oreo Pie]
Firmware: [no gapps -gapps |opengapps.org | savagemessiahzine.com-Aptoide | Magisk | savagemessiahzine.com ] - Port scores 10 Android Q dp6 by creativchic |savagemessiahzine.com [+ Gapps | What would not be bored! A man from our forum and our theme]
AOSP-based: - Ancientrom |SF| XDA |savagemessiahzine.com
- +AOSiP | AOSiP-beta |SF | AOSiP | XDA | savagemessiahzine.com 2 [by Akhil Narang | OFFICIAL & beta]
- +AOSiP-9.0-DerpFest-HOMEMADE by: adi2001, isyedsajid |SF | savagemessiahzine.com
- +AOSiP-9.0-DerpFest-HOMEMADE by srfarias |SF | savagemessiahzine.com
- +AospExtended |SF | AospExtended | XDA | savagemessiahzine.com 2 3 [OFFICIAL]
- +Arrow OS |SF | XDA | savagemessiahzine.com [OFFICIAL]
- ++BeastROMs |SF | savagemessiahzine.com [OFFICIAL | Aptoide-root work, tested bank programs]
- BlissRom |SF | blissrom | XDA | savagemessiahzine.com [OFFICIAL]
- +BootleggersROM |SF | XDA | savagemessiahzine.com
- +CandyROM |SF | candyrom | XDA | savagemessiahzine.com [OFFICIAL]
- +CerberusOS |SF | XDA | savagemessiahzine.com [OFFICIAL]
- +ColtOS-Enigma |AFH | XDA | savagemessiahzine.com
- ++COSP Clean Open Source Project |Cosp | XDA | savagemessiahzine.com [OFFICIAL | Aptoide-root work, tested bank programs, + NTFS, + exFAT]
- Descendant |AFH | XDA | savagemessiahzine.com
- Dot-Extended |SF| XDA |savagemessiahzine.com [OFFICIAL]
- +DotOS |SF | XDA | savagemessiahzine.com [OFFICIAL]
- +Evolution-X |SF | XDA | savagemessiahzine.com [OFFICIAL | + gapps]
- GZOSP Ground Zero Open Source Project |SF | savagemessiahzine.com [OFFICIAL]
- +Havoc OS |SF | XDA | savagemessiahzine.com [OFFICIAL]
- Havoc OS fan edition |SF | SF + gapps | XDA | savagemessiahzine.com [no gapps & + gapps]
- +Havoc OS Mod / uofficial by Ankit Gourav |SF | XDA | savagemessiahzine.com [+ Gapps | Modifications for firmware Havoc Pie Off and Havoc Mod by Ankit Gourav |savagemessiahzine.com]
- +Ion |SF | XDA | savagemessiahzine.com [OFFICIAL | + gapps]
- +Kraken Open Tentacles Project |SF | XDA | savagemessiahzine.com [OFFICIAL | + gapps]
- +Liquid Remix |SF | XDA | savagemessiahzine.com [OFFICIAL]
- LotusOS |SF| XDA |savagemessiahzine.com [OFFICIAL | + gapps]
- MiuiMiX |AFH | XDA | savagemessiahzine.com [OFFICIAL | + gapps]
- ++MSM-Xtended |SF | XDA | savagemessiahzine.com [OFFICIAL | Aptoide-root work, tested bank programs]
- Nitrogen-project |SF| XDA |savagemessiahzine.com
- Omnirom |omnirom | XDA | savagemessiahzine.com [OFFICIAL]
- +Pixel Experience |PE | XDA | savagemessiahzine.com [OFFICIAL | + gapps]
- +POSP Potato Open Sauce Project |SF | XDA | savagemessiahzine.com [OFFICIAL]
- +RevengeOS |OSDN | AFH | XDA| savagemessiahzine.com [OFFICIAL | + gapps]
- RevOS |SF| XDA |savagemessiahzine.com [OFFICIAL]
- Stag-OS |SF | XDA | savagemessiahzine.com [OFFICIAL]
- +Superior OS |SF | XDA | savagemessiahzine.com [OFFICIAL]
- +SyberiaOS |SF | syberiaos | XDA | savagemessiahzine.com [OFFICIAL]
- +validus |SF | savagemessiahzine.com [OFFICIAL]
LOS-based: - +AICP |AICP | XDA | savagemessiahzine.com [OFFICIAL]
- +CrDroid |SF | XDA | savagemessiahzine.com [OFFICIAL]
- ++LineageOS 16. by AlexAnanas |AlexAnanas | XDA | savagemessiahzine.com [Firmware to the latest updates and with minimal modifications. A man from our forum and our theme]
- +LineageOS 16. Unofficial by Kapiljhajhria |AFH | SF | XDA-old | savagemessiahzine.com-old | XDA | savagemessiahzine.com
- +LineageOS 16. Unofficial by Subhrajyoti Sen |SF | XDA | savagemessiahzine.com
- ++MoKee |Mokee | STACK | savagemessiahzine.com [OFFICIAL | First, stable]
- +Resurrection Remix |RR | XDA | savagemessiahzine.com [OFFICIAL]
- +Viper OS |SF | ViperOS | XDA | savagemessiahzine.com [OFFICIAL]
2 We give ++ is written in the description for it.
Recovery:
What other firmware workon the net 9? I have almost all passed.
I mean purely 9 installed version of android, I installed the latest MIUI via fastboot, and then put the recovery vaypal and sewed. Without manually fm and the rest of the updates.
Interested firmware without gapps.
Post has been editedV_POMoSH - 01.10.19, 02:14
Reason for editing: Ancientrom, BlissRom, Descendant, Dot-Extended, GZOSP, Havoc OS fan edition, LotusOS, MiuiMiX, Nitrogen-project, Omnirom, RevOS, Stag-OS
Greetings to all! Ported official firmware OnePlus5T Oxygen OB27 Official, when porting were minimized added libs, turned almost pure firmware other than core (Derp5.1) and the vendor (from OxygenOS OB24), the firmware has become considerably faster and smoother and increased battery life. Patch Face Unlock is also integrated (Unlocking the face), VoldPatch (Reboot / Disable), dialer with automatic recording of conversations in acc format.
Bug - Ambient Display corrected bugs rest remained unchanged.
changes OB27
Link to postXiaomi Redmi Note 5 Global / Note 5 China- unofficial firmware (Post sharapa # 82901798)
Post has been editedsharapa - 13.04.19, 15:46
Bug - Ambient Display corrected bugs rest remained unchanged.
changes OB27
system
- Screenshot optimize the UI
Launcher
- Improved color adaptation of cards on the shelf
Oneplus switch
- Supports migration solutions for applications.
Weather
- More information added to the weather warnings
- weather schedule now matches the format of the system time.
- General bug fixes
Phone
- interface optimization
- Screenshot optimize the UI
Launcher
- Improved color adaptation of cards on the shelf
Oneplus switch
- Supports migration solutions for applications.
Weather
- More information added to the weather warnings
- weather schedule now matches the format of the system time.
- General bug fixes
Phone
- interface optimization
Link to postXiaomi Redmi Note 5 Global / Note 5 China- unofficial firmware (Post sharapa # 82901798)
Post has been editedsharapa - 13.04.19, 15:46
UpdateOxygenOS OB28
Official changes:
System:
• Android security update to 2019.04
• Improved display of network speed
• Supports shortcuts to the appropriate interfaces in the Quick Settings Quick response to landscape
• Supports a rapid response in the notification bar
Launcher:
• Added a tutorial on the shelf
• Added a parking function • Improved page indicator to reflect Icon Pack
• Android security update to 2019.04
• Improved display of network speed
• Supports shortcuts to the appropriate interfaces in the Quick Settings Quick response to landscape
• Supports a rapid response in the notification bar
Launcher:
• Added a tutorial on the shelf
• Added a parking function • Improved page indicator to reflect Icon Pack
Changes made to me:
• Fix the sound in the Bluetooth headset
• Turn off the noise reduction in the dialer. No longer need to disable it in the settings.
• Added a modified dialer
• And the fixes from previous builds
• Turn off the noise reduction in the dialer. No longer need to disable it in the settings.
• Added a modified dialer
• And the fixes from previous builds
Special thanks Sharapa for your help!
Post has been editedNeferon - 16.04.19, 15:50
Firmware
Finally, our unit came "MIUI 10" based on the "Android 9", thereby updated profileFirmware new code / drivers and stuff under the "Android 9".
And this is where the problem begins because of which many who do not like to read the branch are different problems and errors.
Please note that not all custom bikes are working on a new Firmware Pie, when you try to sew is not compatible, you will get the following errors / problems:
1. rekaveri :
• whyred.verify_trustzone
� Updater process ended with Error 7
2. If the firmware will sew and you boot the system:
• Headphone sign in the status bar
• There is no sound
• Problems with the MTP
• Loss of TWRP, if it is not compatible with Firmware Pie, which will need to flash the TWRP the new via Fastboot
################################
At this moment Firmware divided into 2 versions of Oreo and Pie:
Android 8 Oreo
• The latest Dev build: 9.3.14 and later.
• Last Stable assembly and 10.2.2.0 below.
FW 10.2.2.0 Oreo.zip(58.81 MB)Android 9 Pie
• First Dev assembly: 9.3.28 and all subsequent.
FW 20.5.14 Pie.zip(59.31 MB)FW 20.5.7 Pie.zip(59.31 MB)FW 20.3.19 Pie.zip(59.3 MB)FW 9.4.25 Pie.zip(59.67 MB)FW 9.4.18 Pie.zip(59.67 MB)FW 9.4.12 Pie.zip(58.75 MB)FW 9.3.28 Pie.zip(59.66 MB)>If you want other versions of Firmware, then you here!<
Attention!
• Laid out my archives itARB4 Firmware .
• The firmware on the Firmware Pie,ARB4 necessary!
• All manipulations are made only withARB archives, and does not Non-ARB
� Lowering ARB3 to lead to a brick!
################################
Based on the information above:
Before flashing any custom, first you need to prepare and make sure that your device has the correct versionFirmware Oreo or Pie suitable Core and appropriate under the TWRP Correct Version!
Talking aboutcores All new kernel support Firmware Pie. For example: Kangaroox, IceCold, Rebirth, PureCoffee. Some authors have divided them for Oreo and Pie, so be careful when downloading the kernel.
Training:
• Find the desired firmware
• Check the versionFirmware It is required for the firmware.
• BasedFirmware required , Sews the required image (above I put 2 files)
• sews suitable TWRP. Then I would advise you toPitchblackSince it is universal, suitable for FW 8 and 9.
• Reboot into TWRP
• sews the desired firmware andCore
Post has been editedNeferon - 14.05.20, 19:36
Kraken Project
✔ Firmware status: Official
Based on: AOSP / CAF
AAndroid version: Pie 9.0
AGoogle Apps: embed
PDeveloper: Mamutal91
About firmware
This is the personal project, which will be available for download. Designed for personal use, to have a pure experience, without any heavy and unnecessary things. I was not interested in the number of downloads and becoming popular.
Chat: @KrakenProject
News: @KrakenNews
Chat: @KrakenProject
News: @KrakenNews
❗ Bugs
- Unknown
YScreenshots
 |
 |
 |
 |
& List of changes
changes 05/14/19
* Merge May Security Patch
* Add support for theming notifications
* GApps included
* Add support for theming notifications
* GApps included
changes 05/05/19
* Add Theme Dark and Accents colors
* SystemUI: Fix double-tap to cam. opens right lockscreen shortcut (eray orçunus)
* SystemUI: Bring back lockscreen tuner (eray orçunus)
* Display: msm8974: Add -Wno-error to compile with global -Werror. (Chih-Hung Hsieh)
* Launcher: Add Lawnchair - Thanks @deletescape :) (Kshitij Gupta)
* SystemUI: Fix double-tap to cam. opens right lockscreen shortcut (eray orçunus)
* SystemUI: Bring back lockscreen tuner (eray orçunus)
* Display: msm8974: Add -Wno-error to compile with global -Werror. (Chih-Hung Hsieh)
* Launcher: Add Lawnchair - Thanks @deletescape :) (Kshitij Gupta)
changes 04/22/19
- First build
^ Installation
HandwithtbutI atwithtbutnaboutattobut:
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
! Download
Post has been editedNeferon - 16.05.19, 09:45
Logo
 |
LineageOS
Description
Version LineageOS: 16.0
Android version: 9.0
Version FW: GS PEIMIXM
The kernel: Linux 4.4.189
Security Patch: r46
Updated: 26/08/2019
LineageOS 16.0 with the latest FW and security updates. Is able to be updated on the OTA. Absolutely clean - with no ad-libbing and extra naverstov. Gappsy not built, you need to put separately. I will update the firmware as new FW and security updates.
Fidbek welcome!
Android version: 9.0
Version FW: GS PEIMIXM
The kernel: Linux 4.4.189
Security Patch: r46
Updated: 26/08/2019
LineageOS 16.0 with the latest FW and security updates. Is able to be updated on the OTA. Absolutely clean - with no ad-libbing and extra naverstov. Gappsy not built, you need to put separately. I will update the firmware as new FW and security updates.
Fidbek welcome!
Screenshots
 |
 |
 |
 |
 |
 |
Support
V- Full support
S- partial support
X- lack of support
VAudio
VRil
VEncryption
VWiFi
VUSB
VGPS
VBluetooth
VCamera
VVideo
VDisplay
VF2fs
VFingerprint scanner
VInfrared port
VAccelerometer
VGyroscope
VProximity sensor
VLight sensor
VFW GS PEIMIXM
VSELinux
VOta
VEncryption
S- partial support
X- lack of support
VAudio
VRil
VEncryption
VWiFi
VUSB
VGPS
VBluetooth
VCamera
VVideo
VDisplay
VF2fs
VFingerprint scanner
VInfrared port
VAccelerometer
VGyroscope
VProximity sensor
VLight sensor
VFW GS PEIMIXM
VSELinux
VOta
VEncryption
Installation
Clean installation - the loss of all data
• Go to the TWRP
• Net Forums:
• Data - yes
• Dalvik / ART Cache
• Cache
• Data
• Internal Storage
• System
• Vendor
• Install firmware, and the rest of your choice (eg, Ruth Magisk and fashion)
• Reboot the System
Update using TWRP - user data is stored (files and applications)
• Go to the TWRP
• Net Forums:
• Dalvik / ART Cache
• Cache
• Installing firmware
• If you have previously installed Ruth Magisk, it will reset itself automatically
• Reboot the System
Update through the System - User data saved (files and applications)
• Go to Settings - System - Advanced - System Upgrade
• Click on a circle with an arrow to search for the latest updates
• Click the Download and firmware will be downloaded
• Press the Set button
• A window will appear with the agreement on the installation, click OK
• The system will reboot into TWRP itself automatically set
• If you have previously installed Ruth Magisk, it will reset itself automatically
• Go to the TWRP
• Net Forums:
• Data - yes
• Dalvik / ART Cache
• Cache
• Data
• Internal Storage
• System
• Vendor
• Install firmware, and the rest of your choice (eg, Ruth Magisk and fashion)
• Reboot the System
Update using TWRP - user data is stored (files and applications)
• Go to the TWRP
• Net Forums:
• Dalvik / ART Cache
• Cache
• Installing firmware
• If you have previously installed Ruth Magisk, it will reset itself automatically
• Reboot the System
Update through the System - User data saved (files and applications)
• Go to Settings - System - Advanced - System Upgrade
• Click on a circle with an arrow to search for the latest updates
• Click the Download and firmware will be downloaded
• Press the Set button
• A window will appear with the agreement on the installation, click OK
• The system will reboot into TWRP itself automatically set
• If you have previously installed Ruth Magisk, it will reset itself automatically
FAQ
- The informal assembly is different from the official one?
- Almost nothing, in an informal assembly has all the features of the official
- Is it possible to roll a custom kernel?
- Nakata can, but do not ask me to fix bugs associated with the use of a custom kernel
- Almost nothing, in an informal assembly has all the features of the official
- Is it possible to roll a custom kernel?
- Nakata can, but do not ask me to fix bugs associated with the use of a custom kernel
Download
Questions about installing the firmware to this topic
Firmware page with all the assemblies, FW and mods:tyk
Firmware page with all the assemblies, FW and mods:tyk
Mods and patches
Maud on autorecord calls:tyk
adjacent
Post has been editedAlexAnanas - 26.08.19, 12:31
Reason for editing: 26.08.2019
AOKP
Little Fairy Sophie Edition
Little Fairy Sophie Edition
✔ Firmware status: Unofficial
Based on: LOS
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: @JochenSplifficus
❗ Bugs
- Change Windows recently Pie on Oreo, will lead to eternal flight launcher.
YScreenshots
& List of changes
changes 05/11/19
* Update to MIUI 9.4.25
* Remove Perf Profiles from Nokia 7 Plus
* Add MicroG support
* Rebased Kernel with latest CAF tags
* Latest AOKP changes
* Remove Perf Profiles from Nokia 7 Plus
* Add MicroG support
* Rebased Kernel with latest CAF tags
* Latest AOKP changes
changes 03/05/19
* Guaiyihu Kernel 4.4.179-perf-MoD + by @ Adi20_01
* Clang 9.0.3
* Updated to MIUI 9.4.18
* Many under the hood changes (thanks to @ Adi20_01)
* Selinux permissive (might be fixed in next release)
Known buggs: Swapping to oreo-style recents will result in launcher force close after reboot. Stay with pie recents style for now. (AOKP Source bug)
* Clang 9.0.3
* Updated to MIUI 9.4.18
* Many under the hood changes (thanks to @ Adi20_01)
* Selinux permissive (might be fixed in next release)
Known buggs: Swapping to oreo-style recents will result in launcher force close after reboot. Stay with pie recents style for now. (AOKP Source bug)
changes 04/25/19
* Updated to los-16 pie device tree (thanks to @nibaji)
* Lots of Pie related changes by guaiyihu + some tweaks by nibaji
* Icecold Kernel R 3.3
* APN bug fixed (thanks to @Thespartann and @nibaji)
* MIUI Camera added
* Lots of Pie related changes by guaiyihu + some tweaks by nibaji
* Icecold Kernel R 3.3
* APN bug fixed (thanks to @Thespartann and @nibaji)
* MIUI Camera added
^ Installation
HandwithtbutI atwithtbutnaboutattobut:
Before you begin, requiredFIRMWARE PIE 9.3.28and higher
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware + GApps
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
Before you begin, requiredFIRMWARE PIE 9.3.28and higher
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware + GApps
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
Post has been editedNeferon - 11.05.19, 20:55
DerpFest
✔ Firmware status: Unofficial
Based on: AOSP
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: @Adi
❗ Bugs
-
YScreenshots - lots of, well, very much
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
& List of Changes to Firmware Pie 9.4.25 and above
changes 05/14/19
Requires clean install!
*) Livedisplay support
*) Rename light and fingerprint hidl service
*) Pie miui based Kernel from GuaiYiHu with some tweaks like unlocked pubg hd, kcal, sound control, usb fastcharge
*) Latest source updates from derpfest
*) Livedisplay support
*) Rename light and fingerprint hidl service
*) Pie miui based Kernel from GuaiYiHu with some tweaks like unlocked pubg hd, kcal, sound control, usb fastcharge
*) Latest source updates from derpfest
changes 05/11/19
• Enabled aod support
• Rebased kernel
• Latest source updates from derpfest
• Rebased kernel
• Latest source updates from derpfest
changes 05/05/19
Upstream source which means:
- Q Clock: Wallpaper based color is back
- Q Clock: Added alignment options
- Q Clock: Added a lot of translations
- Switched to a new Custom doze package with settings for Ambient brightness values
- Added Pixel Navbar
- SystemUI: Decrease padding for statusbar icons
- Themes: fix autofill saved entries picker dialog
- AODTile: Fix long click intent
- overlay: make power menu icons follow accent on light theme
- Some more things maybe I can not remember more: P fixed ambient display
NEW BUILD ONES: Fixed Volte for some operators
Added back ignoring RSSNR (improved signal)
- Q Clock: Wallpaper based color is back
- Q Clock: Added alignment options
- Q Clock: Added a lot of translations
- Switched to a new Custom doze package with settings for Ambient brightness values
- Added Pixel Navbar
- SystemUI: Decrease padding for statusbar icons
- Themes: fix autofill saved entries picker dialog
- AODTile: Fix long click intent
- overlay: make power menu icons follow accent on light theme
- Some more things maybe I can not remember more: P fixed ambient display
NEW BUILD ONES: Fixed Volte for some operators
Added back ignoring RSSNR (improved signal)
changes 01/05/19
• Fixed low signal (enabled rssnr)
changes 04/28/19
Device fixes:
• Fixed hal1 issue
• Fixed heating issue
• Fixed manual network selection
• Kernel: fixed vibration control
• Update to 4.4.179
• Fixed hal1 issue
• Fixed heating issue
• Fixed manual network selection
• Kernel: fixed vibration control
• Update to 4.4.179
changes 04/26/19
Bootleggers tree adapted to aosip
Addressed few spamming denials
Disabled split a2dp
GuaiYiHu kernel modded included
Addressed few spamming denials
Disabled split a2dp
GuaiYiHu kernel modded included
& List of Changes to Firmware Oreo 9.3.14 and below
changes 01/05/19
• Up to date with Source
• Kernel upstream 179
• Stuff
• Kernel upstream 179
• Stuff
changes 04/26/19
Older tree
Derp kernel included
Derp kernel included
^ Installation
HandwithtbutI atwithtbutnaboutattobut:
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware + GApps
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
- Wipe / system, / vendor, / data, / cache + dalvik
- sewn firmware + GApps
- Reboot the system
ABOUTbnaboutatlenande:
- sewn firmware
- Wipe / cache + dalvik.
- Reboot the system
! Download
Post has been editedvovcik3 - 13.08.19, 10:54
Reason for edit: Update for Pie
ipkas @ 1.05.19, 20:23
there is only a warning and a request to make sure ... How do I know which wf? not mentioned ... proceeding with firmware fw oreo on firmware fw pie and vice versa ...
 |
1.Stavite the companies you want
2. After tvrp, you can skip the last if necessary Pitchblack
3.Perezagruzhaetes in tvrp
4.Stavite necessary firmware
5.Yadro if you want
6.Zagruzhaetes in
2. After tvrp, you can skip the last if necessary Pitchblack
3.Perezagruzhaetes in tvrp
4.Stavite necessary firmware
5.Yadro if you want
6.Zagruzhaetes in
Review OxygenOS OB29
Pros:
- Animation and the interface itself is very pleasant to use. Visual quality and smoothly. Probably better than I used.
- Most of the time the kernel KangarooX is in deep sleep, if I do not use a smartphone. That, accordingly, it affects the battery power for the better.
- In the first sensations hold a charge better. Exact figures are not given because it uses less than a day with a single charge.
Minuses:
- Dance with a tambourine for automatic brightness. Initially, the screen is very dark. Just can not see anything.
- sometimes lag when rendering gesture turn in a list of recent priloezhny.
- Why does not work the camera in the firmware after installation. Nakata gcam.
- So deep asleep applications that do not receive notification from the Messager.
It may, of course, I Krivorukov. Installation done with all wipe.
Pros:
- Animation and the interface itself is very pleasant to use. Visual quality and smoothly. Probably better than I used.
- Most of the time the kernel KangarooX is in deep sleep, if I do not use a smartphone. That, accordingly, it affects the battery power for the better.
- In the first sensations hold a charge better. Exact figures are not given because it uses less than a day with a single charge.
Minuses:
- Dance with a tambourine for automatic brightness. Initially, the screen is very dark. Just can not see anything.
- sometimes lag when rendering gesture turn in a list of recent priloezhny.
- Why does not work the camera in the firmware after installation. Nakata gcam.
- So deep asleep applications that do not receive notification from the Messager.
It may, of course, I Krivorukov. Installation done with all wipe.
A little experiment! DidAroma installer for firmware OxygenOS OB29
Opportunities:
1. Installing Drivers and the kernels of their choice.
• Install or not firmware
• At your option to install one selected core
• If you do not choose, I will remain the core of the native Ancient 1.4
2. Splash screen customization and Booth animations to choose from.
• While there are 2 animations and 2 splash, stock and new by me.
3. Debloater - the ability to remove embedded application from the list of your choice.
• Complete removal of Google applications
• Wipe OnePlus applications
• Selective removal applications
• Removing through aromu, will make it possible to remove the program from the settings in the system.
4. Installing Magisk.
• Establish a stable 19.1
• Delete an existing Magisk
• Nothing to do
Important!
This experimental assembly and Debloater function is not fully tested. If anyone dare to test, I will be grateful for the reviews of the performance!
Just I want to say, as a basis for OxygenOS Aroma taken from a branch to 5T. And I do not usurp his work!
Download:
� Google drive
� Mega
Post has been editedNeferon - 02.05.19, 21:41
vbykov , 1. The first puts the patches into magisk
RN5 F Camera Patch module v0.4b.zip(856,09 KB)RN5 Camera Patch module v2.034a (Custom 9.0) (1) .zip(11.93 MB)2. puts the camera
Gcam 5:
GCam-5.1.018-Pixel2Mod-Arnova8G2-V8.3b1 (1) .apk(37.33 MB)Gcam 6:
gc_6.1.021_whyred_05dm.apk(109.6 MB)I wrote and thought. And on what port you're sitting? On my or uv.Sharapa?
If a port on the assembly of Sharapa 9.0.5, the modules will not work for the camera.
Modules for the camera while not compatible with the firmware and vendor on 9ke
Post has been editedNeferon - 05.05.19, 12:02
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement