Xiaomi Redmi Note 5 Global / Note 5 China- Unofficial firmware
Poll 04.04 2 rn5.png
Instructions to transfer your current firmware file on f2fs system saves data:
(Hereinafter meant that the section of media, images, videos, downloads and others. Important information you will transfer or not survive on their own. This option describes the preservation of the current firmware to your current stack of programs, if they are recorded on the internal memory card)
1. Ensure that your current firmware version and installed the kernel supports f2fs. Otherwise, to update these.
2. establish twrp with guaranteed support f2fs. (E.g., OrangeFox9.1)
later in the twrp:
3. To back up the partition, at least, Boot, System, Data, Vendor. Desirably the outer microSD or OTG usb. This will save your current firmware in the case of failure.
4. perform cash conversion and data sections in the file system f2fs (could be, and section vendor, system, cust, but about f2fs performance in these and other areas of the developers said the fox that this will never happen: coldly:). On the example of orangefox 9.1 is the cleaning menu expanded ochistka->select the section below under Options ->change FS->choose f2fs.
5. Press the top of the gear and select twrp main menu:
use rm fs instead of formatting
6.
Restore partition data saved in step 3 through the recovery menu
7. Boot the system.
ps. speed, and it can not add extra, but someone thinks that the work with the data in that file system will prolong the life of your device.
perhaps the same should be done with an external micro SD, but it's not exactly: D
Post has been editedtory_ad - 16.02.19, 11:58
(Hereinafter meant that the section of media, images, videos, downloads and others. Important information you will transfer or not survive on their own. This option describes the preservation of the current firmware to your current stack of programs, if they are recorded on the internal memory card)
1. Ensure that your current firmware version and installed the kernel supports f2fs. Otherwise, to update these.
2. establish twrp with guaranteed support f2fs. (E.g., OrangeFox9.1)
later in the twrp:
3. To back up the partition, at least, Boot, System, Data, Vendor. Desirably the outer microSD or OTG usb. This will save your current firmware in the case of failure.
4. perform cash conversion and data sections in the file system f2fs (could be, and section vendor, system, cust, but about f2fs performance in these and other areas of the developers said the fox that this will never happen: coldly:). On the example of orangefox 9.1 is the cleaning menu expanded ochistka->select the section below under Options ->change FS->choose f2fs.
5. Press the top of the gear and select twrp main menu:
use rm fs instead of formatting
6.
Restore partition data saved in step 3 through the recovery menu
7. Boot the system.
ps. speed, and it can not add extra, but someone thinks that the work with the data in that file system will prolong the life of your device.
perhaps the same should be done with an external micro SD, but it's not exactly: D
Post has been editedtory_ad - 16.02.19, 11:58
✔ Firmware status: Official
Based on: AOSP
AAndroid version: Pie 9.0
AGoogle Apps:Arm64 / 9.0 / Pico
PDeveloper: Ground Zero Roms Team
❗ Bugs
- Unknown
^ Installation
- We put TWRP
- We make wipe partitions / dalvik / system / cache / data (internal memory optional)
- Reboot the phone and go back to TWRP
- We sew firmware
- sew Gapps
- Reboot into system
& changes 02/17/19
- The February security patch
- The core has been updated to .174
- Updated SDM blobs of LA.UM.7.4.r1-04100-8x98.0
- Support f2fs
- GPS configs of Mi8 Lite
- Upgrade to MIUI V10.2.2.0.OEICNXM
- A couple of chips
- The core has been updated to .174
- Updated SDM blobs of LA.UM.7.4.r1-04100-8x98.0
- Support f2fs
- GPS configs of Mi8 Lite
- Upgrade to MIUI V10.2.2.0.OEICNXM
- A couple of chips
Post has been editedNeferon - 18.02.19, 00:32
Just got BaikalOS Pie version of our device.
From a developer a couple of hours drive on test runs.
All the declared works, except for Wi-Fi Display until (he promised ProFIX an update in the next firmware).
As part of the firmware is already available GCAM, which works with the front camera on the global whyred devices.
Miui camera has not yet been prizhivit.
Russification of the firmware is complete, because of the basis the firmware BaikalOS Pie, developed by our two Russian developers for multiple target devices (not GSI and sGSI!), A part of which are still not part of our device list.
For open channel name in the cart on skrinshtah search will show itself and a description of the firmware.
Franca in the composition of the firmware is not.
Post has been editedSuvorik1969 - 19.02.19, 14:44
From a developer a couple of hours drive on test runs.
All the declared works, except for Wi-Fi Display until (he promised ProFIX an update in the next firmware).
As part of the firmware is already available GCAM, which works with the front camera on the global whyred devices.
Miui camera has not yet been prizhivit.
Russification of the firmware is complete, because of the basis the firmware BaikalOS Pie, developed by our two Russian developers for multiple target devices (not GSI and sGSI!), A part of which are still not part of our device list.
For open channel name in the cart on skrinshtah search will show itself and a description of the firmware.
Franca in the composition of the firmware is not.
Screenshots with channel telegrams
 |
 |
Screenshots of the firmware
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Post has been editedSuvorik1969 - 19.02.19, 14:44
Reason for editing: Added screenshots of firmware.
dotOs
✔ Firmware status: Official
Based on: AOSP
AVersion of Android: 9.0 "Pie"
PDeveloper:Darkstar085
❗ Bugs
This is the first build, if you find, writehis(In English of course)
YScreenshots
 |
 |
 |
^ Installation
& List of changes
26.06.2019
- Pie FW based (Please read below instrctions)
- Added Mi Sound Enhancer.
- Camera Changes by nhappyman.
- Update dpi to 440.
Firmware Required -MIUI V10.3.1.0.PEIMIXM
Recovery Required - Lattest Orange fox / Lattest PitchBlack / TWRP by Ankit
11.03.2019
• Derp v5.0
• Kernel Version: 4.4.176
• March security patches.
• Fixed a problem of overlapping clock in the status bar.
• Added option inversion processing navbara.
• Separation volume of notifications and call.
21.02.2019
[=] Fixed radio.
[+ -] Derp kernel was changed to PureCaf.
[=] Logo Fix.
[+] Added zaradke control vibration.
[=] Fix OTA.
[=] And fixes billion)
15.02.2019
-First build
Changes from dotOs on Android Oreo ->here
- Pie FW based (Please read below instrctions)
- Added Mi Sound Enhancer.
- Camera Changes by nhappyman.
- Update dpi to 440.
Firmware Required -MIUI V10.3.1.0.PEIMIXM
Recovery Required - Lattest Orange fox / Lattest PitchBlack / TWRP by Ankit
11.03.2019
• Derp v5.0
• Kernel Version: 4.4.176
• March security patches.
• Fixed a problem of overlapping clock in the status bar.
• Added option inversion processing navbara.
• Separation volume of notifications and call.
21.02.2019
[=] Fixed radio.
[+ -] Derp kernel was changed to PureCaf.
[=] Logo Fix.
[+] Added zaradke control vibration.
[=] Fix OTA.
[=] And fixes billion)
15.02.2019
-First build
Changes from dotOs on Android Oreo ->here
! Download
Revision as of 26.06:Sourceforge
Revision as of 11.03:Sourceforge
Revision as of 21.02:Sourceforge
Revision as of 15.02:Sourceforge
Revision as of 11.03:Sourceforge
Revision as of 21.02:Sourceforge
Revision as of 15.02:Sourceforge
Post has been editedThePowerHorn - 27.06.19, 15:05
Reason for editing: Updating
Paranoid Android
✔ Firmware status: OfficialBETA
Based on: AOSP
AAndroid version: Pie 9.0
AGoogle Apps:Arm64 / 9.0
PDeveloper: @Akhilnarang, @mihran_thalhath
❗ Bugs
- Bugs can be many and many are not working.
- To help improve the Paranoid Android, do not forget to dologs crash / bug and keep on this page XDA .
- To help improve the Paranoid Android, do not forget to dologs crash / bug and keep on this page XDA .
Additional Information
Custom kernel is not supported!
>Here<the changes will be posted and news about the firmware
>Here<the changes will be posted and news about the firmware
^ Installation
- Boot in TWRP (TWRP recommended)
- Wipe ->Swipe to Factory Reset
- sews AOSPA.zip
- To stitch [optional] Gapps of their choice, but the options Stock and Super are not recommended !!!)
& List of changes
The first build.
Firmware in beta testing.
Upgraded source base code to LA.UM.7.3.r1-06700-sdm845.0.
OTS: On The Spot, introduce user hint prompt system, uses a snackbar design to prompt the user for changes.
Battery Styles, introduce different battery designs and options for your choice. Available at Settings → Battery.
Pocket Mode, introduces a mode that will detect whenever your device is on the pocket and prevent it from waking.
Fast Charging indicator (includes OnePlus devices).
Quick Settings Pull Down with one finger.
Extended Restart.
Introduced Settings reset for PA features under Settings → System → Reset Options.
Double tap to sleep on keyguard (lockscreen).
Volume Long Press to Skip Tracks.
Volume panel on left for devices with left volume buttons.
Newer and better Screen Zoom levels.
Navigation bar toggle for devices with hardware keys.
Hardware buttons light support.
Adjusted statusbar notifications per device.
NFC Tile is now enabled in Quick Settings.
Firmware in beta testing.
Upgraded source base code to LA.UM.7.3.r1-06700-sdm845.0.
OTS: On The Spot, introduce user hint prompt system, uses a snackbar design to prompt the user for changes.
Battery Styles, introduce different battery designs and options for your choice. Available at Settings → Battery.
Pocket Mode, introduces a mode that will detect whenever your device is on the pocket and prevent it from waking.
Fast Charging indicator (includes OnePlus devices).
Quick Settings Pull Down with one finger.
Extended Restart.
Introduced Settings reset for PA features under Settings → System → Reset Options.
Double tap to sleep on keyguard (lockscreen).
Volume Long Press to Skip Tracks.
Volume panel on left for devices with left volume buttons.
Newer and better Screen Zoom levels.
Navigation bar toggle for devices with hardware keys.
Hardware buttons light support.
Adjusted statusbar notifications per device.
NFC Tile is now enabled in Quick Settings.
YScreenshots
-
! Download
DOfficial page
- XDA
Post has been editedNeferon - 22.02.19, 07:44
ValidusOS
✔ Firmware status: OfficialBETA
Based on: GZOSP
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: @Syed Sajid
❗ Bugs
- Unknown
^ Installation
- Boot into TWRP
- Wipe ->Data, System, Vendor, Cache, Dalvik
- sews Firmware
- sews Gapps
- Boot into the system
& List of changes
changes 04/09/19
- April Security Patch
- Android -9.0.0_r35
- Kernel Upstream to 178 (Derp v5.2)
- Added deep sleep info to uptime
- Android -9.0.0_r35
- Kernel Upstream to 178 (Derp v5.2)
- Added deep sleep info to uptime
changes 03/27/19
-March Security update
-Kernel upstream to .177-Derp
-Added customization on wolves den
-Kernel upstream to .177-Derp
-Added customization on wolves den
changes 02/24/19
- Add Camera device.impl
- Build missing hidl sound implementation
- Kernel Upstream to .176
- thermal: restore hal from miui
- f2fs support
- enforcing build.
- Build missing hidl sound implementation
- Kernel Upstream to .176
- thermal: restore hal from miui
- f2fs support
- enforcing build.
changes 02/22/19
- Feb Security patch
- Android 9.0.0_r31
- Kernel Upstream to .175
- Some Stuff's
- Android 9.0.0_r31
- Kernel Upstream to .175
- Some Stuff's
YScreenshots
 |
 |
DOfficial page
- Tapatalk
Post has been editedNeferon - 10.04.19, 17:42
Reason for editing: Of. page Tapatalk
MCAOSP on December 15, 2018.
RELEASE taken from public groups Telegram
No one in my personal HP and TP do not merge, the author mcflash write in PM if you want me to post deleted.
GDRIVE (?) | MEGA (week)
Index
Proof
 |
 |
About GAPPS, do not tell, do not put.
F2fs like no, he did not check, it is necessary to write the patch.
Who can not download, please to this topicperezaleyte.
Post has been editedpqha - 22.02.19, 18:18
Reason for editing: Yandeeks
 |
HAVOC OS OFFICIAL PIE UPDATE FOR WHYRED [02.23.19]
Changes
. Device Changelog -
* Fixed signal icon disappearing when manual network selection
* Fixed battery info fc
* Added prebuilt thermal hal from MIUI V10 2.2.0 OEICNXM
* Switched to PureCAF kernel
ROM Changelog -
* Added new ambient display implementation
* Added theme background color picker
* Added AOD on charge
* Added accent option for QS panel
* Added haptic feedback duration for OP gestures
* Added Home button wake for some devices
* Reorganised Havoc Settings
* Improved UI
* Removed ambient music from lockscreen
* Fixed toasts with RTL languages
* Fixed QS gradient when custom header is disabled
* Fixed music ticker glitches
* Fixed compact navbar layout
* Fixed autofill dialog on dark themes
* Fixed wellbeing dark theme
* Fixed signal icon disappearing when manual network selection
* Fixed battery info fc
* Added prebuilt thermal hal from MIUI V10 2.2.0 OEICNXM
* Switched to PureCAF kernel
ROM Changelog -
* Added new ambient display implementation
* Added theme background color picker
* Added AOD on charge
* Added accent option for QS panel
* Added haptic feedback duration for OP gestures
* Added Home button wake for some devices
* Reorganised Havoc Settings
* Improved UI
* Removed ambient music from lockscreen
* Fixed toasts with RTL languages
* Fixed QS gradient when custom header is disabled
* Fixed music ticker glitches
* Fixed compact navbar layout
* Fixed autofill dialog on dark themes
* Fixed wellbeing dark theme
Post has been editedvitautasres - 23.02.19, 16:41
Reason for editing: Modified link
Dirty unicorns
✔ Firmware status: Unofficial
Based on: AOSP
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: mamutal91, Raj, Shekhawat
& List of assembly changes from Shekhawat
- Requires Firmware Pie 9.3.25+
- Gapps embed
- Gapps embed
& List of changes in the assembly of the Raj
- Requires Firmware Pie 9.3.25+
& The list of changes from the assembly mamutal
* DerpKernel v4.8
* Full gestures navbar: do not break IME navbar button
* Full gestures navbar: add missing haptic feedback events
* Navbar: Add custom app actions
* Navbar: Add ringer modes action
* ActionUtils: Improve ringer modes
* ActionUtils: Ringer modes
* ActionUtils: cleanup screen On action code
* ActionUtils: Add screen on action
* CustomActions: Use settings provider to store value
* CustomActions: Add support to launch applications
* CustomActions: Screen off availability
* CustomActions: Add ringer modes
* Themes: Update the dark theme
* Full gestures navbar: do not break IME navbar button
* Full gestures navbar: add missing haptic feedback events
* Navbar: Add custom app actions
* Navbar: Add ringer modes action
* ActionUtils: Improve ringer modes
* ActionUtils: Ringer modes
* ActionUtils: cleanup screen On action code
* ActionUtils: Add screen on action
* CustomActions: Use settings provider to store value
* CustomActions: Add support to launch applications
* CustomActions: Screen off availability
* CustomActions: Add ringer modes
* Themes: Update the dark theme
❗ Bugs
- Unknown
! Download
Firmware from Shekhawat:
- Gapps built
- Sourceforge
Firmware by Raj:
- Gdrive
Firmware from Mamutal:
- AFH
- Opengapps
Not necessarily put the camera + patch if you do not need it.
Camera Camera patch MIUI +:
AI_FOR_AOSP_BASED_ONLY_PART7a (MAGISK_UNITY) .zip(105.16 MB)
- Gapps built
- Sourceforge
Firmware by Raj:
- Gdrive
Firmware from Mamutal:
- AFH
- Opengapps
Not necessarily put the camera + patch if you do not need it.
Camera Camera patch MIUI +:
AI_FOR_AOSP_BASED_ONLY_PART7a (MAGISK_UNITY) .zip(105.16 MB)DInstallation Instructions
1.Delaem wipes are:
-date of
-system
-vendor
-kesh / daklvik cache
2. sews itself firmware
3. sewn Gapps
5. Boot the system
6. pass and set in TWRP Magisk (optional)
-date of
-system
-vendor
-kesh / daklvik cache
2. sews itself firmware
3. sewn Gapps
5. Boot the system
6. pass and set in TWRP Magisk (optional)
& Notes
- The firmware absent almost all major applications (Dialer, SMS, Gallery, etc).
- There are a small number of customizations
- There are a small number of customizations
YScreenshots
 |
 |
 |
 |
Sources
Post has been editedNeferon - 08.04.19, 18:09
Logo
AOSiPUnofficial ROM
Created: PriQue .
XDA: Nope .
Last update: 05.03.2019
Changelog
✓ Latest Derp Kernel
✓ Upstream sources
✓ Fix fingerprint (thanks Akhil Narang)
✓ Returns Selinux Enforcing
✓ March security patch
✓ Upstream sources
✓ Fix fingerprint (thanks Akhil Narang)
✓ Returns Selinux Enforcing
✓ March security patch
Post has been editedmicky228 - 05.03.19, 18:25
Reason for editing: Updating.
Frequently asked Questions
1. Do not arrive on time communication and notification from the messenger? - settings, battery, battery saving in the upper right corner click three points, advanced optimization, disable the point deep optimization!
2. Do not receiving messages or notifications from the messengers, unloaded application? - setting system, recent applications management and select "Routine cleaning"
3. After installing the patch TWRP camera MIUI, I get an error when launching the camera? - setting, application and notification, select the item camera razraschenie and include all the permits!
4. With the active use of the smartphone constantly pops up warning about overheating it? - apply the patch TWRP temperature.zip!
5. How to select the type of network? - Manual selection, dial the code * # * # 4636 # * # * or set the network mode to program play marketahttps: //play.google.co...ther.networkmode&hl=ru
6. What is the recommend install Gcam magisk and a module? - For Gcam 6.2.030 and GCAM 7.0 magisk module is not needed.
Camera Gcam 6.2 -MGC_6.2.030_DCIP3Version_Bulkin043_V8.2-1.apk(77.09 MB)
Camera Gcam 6.2 -GoogleCamera_6.2.030.244457635_Mod_PE_Whyred.apk(85.67 MB)
Camera GCAM 7. 0 -PMGC_7.0.009_FinalRelesedVersion_V10.apk(113 MB)
7. What are the bugs in your firmware? - 1) It does not work read mode. 2) do not work correctly with no sound mode (vibration mode) works without sound. 3) When fully charged smartphone not disconnected ice indication.
8. When you connect your smartphone to your computer via USB wire, and selecting a data point does not appear internal drive? - setting system for developers and include the item debugging via USB.
9. Is there a function "unlock the face" in your firmware? - setting the security lock set and the password, or pattern, to trust agents activate Smart Lock (Google), step back and come now available items Smart Lock, further configure it (the native feature face recognition does not work anddo not activate it ).
10. How to enter the mode for developers? - settings of the phone, under the item Tapan "build number" until it appears, you have become a developer.
11. How to switch the vibration mode without sound, sound? - go to the edit mode and drag the curtain in it from the bottom icon "Oxygen Sound Profile" and give him a permit (in silent mode does not work properly).
12. How to activate additional options restart when pressing start? - setting system for developers and include the item "options reset".
13. It is impossible to establish a fingerprint for the program Sberbank Online? - Setup, safety and locking devices Admin application and give permission "Googie Play" smart reboot.
14. Why flies fingerprint program Sberbank Online? - when a reboot is necessary to unlock the smart pattern, or password, but not in any way a fingerprint.
2. Do not receiving messages or notifications from the messengers, unloaded application? - setting system, recent applications management and select "Routine cleaning"
3. After installing the patch TWRP camera MIUI, I get an error when launching the camera? - setting, application and notification, select the item camera razraschenie and include all the permits!
4. With the active use of the smartphone constantly pops up warning about overheating it? - apply the patch TWRP temperature.zip!
5. How to select the type of network? - Manual selection, dial the code * # * # 4636 # * # * or set the network mode to program play marketahttps: //play.google.co...ther.networkmode&hl=ru
6. What is the recommend install Gcam magisk and a module? - For Gcam 6.2.030 and GCAM 7.0 magisk module is not needed.
Camera Gcam 6.2 -
MGC_6.2.030_DCIP3Version_Bulkin043_V8.2-1.apk(77.09 MB)Camera Gcam 6.2 -
GoogleCamera_6.2.030.244457635_Mod_PE_Whyred.apk(85.67 MB)Camera GCAM 7. 0 -
PMGC_7.0.009_FinalRelesedVersion_V10.apk(113 MB)7. What are the bugs in your firmware? - 1) It does not work read mode. 2) do not work correctly with no sound mode (vibration mode) works without sound. 3) When fully charged smartphone not disconnected ice indication.
8. When you connect your smartphone to your computer via USB wire, and selecting a data point does not appear internal drive? - setting system for developers and include the item debugging via USB.
9. Is there a function "unlock the face" in your firmware? - setting the security lock set and the password, or pattern, to trust agents activate Smart Lock (Google), step back and come now available items Smart Lock, further configure it (the native feature face recognition does not work anddo not activate it ).
10. How to enter the mode for developers? - settings of the phone, under the item Tapan "build number" until it appears, you have become a developer.
11. How to switch the vibration mode without sound, sound? - go to the edit mode and drag the curtain in it from the bottom icon "Oxygen Sound Profile" and give him a permit (in silent mode does not work properly).
12. How to activate additional options restart when pressing start? - setting system for developers and include the item "options reset".
13. It is impossible to establish a fingerprint for the program Sberbank Online? - Setup, safety and locking devices Admin application and give permission "Googie Play" smart reboot.
14. Why flies fingerprint program Sberbank Online? - when a reboot is necessary to unlock the smart pattern, or password, but not in any way a fingerprint.
I recommend all to put the firmware c FW_V10.3.3.0_PIE and TWRP-9.0-Pie - 3.3.0-0_DZ
Set FW_V10.3.3.0_PIEFW_V10.3.3.0_PIE.zip(59.27 MB)
Install TWRP-9.0-Pie - 3.3.0-0_DZ -TWRP-9.0-Pie - 3.3.0-0_DZ.img(50 MB)
I recommend to install a modem modem_GS_10.2.2.0modem_GS_10.2.2.0.zip(50.74 MB)
or modem_GS_9.5.6.0modem_GS_9.5.6.0.zip(50.49 MB)
FW_V10.3.3.0_PIE.zip(59.27 MB)Install TWRP-9.0-Pie - 3.3.0-0_DZ -
TWRP-9.0-Pie - 3.3.0-0_DZ.img(50 MB)I recommend to install a modem modem_GS_10.2.2.0
modem_GS_10.2.2.0.zip(50.74 MB)or modem_GS_9.5.6.0
modem_GS_9.5.6.0.zip(50.49 MB)OP5TOxygen_OB33_PIE-9.0_PIE_K-4.9_whyred_041119
Author : Sharapa
Firmware : PIE-9.0 OnePlus5TOxygen OB33
https: //drive.google.c...lJWcPBHXLVRGip82yx4xlhchanges OB33
System:
Changes
System
- General bug fixes and stability improvements
Weather
- Improved scrolling process to switch between pages
- Weather maps for several cities can now be rearranged or deleted by pressing and holding them
- Optimized user interface that allows you to use this app when the app permission to access the location of the APS is turned off.
Phone
- Best animated effects for switching between pages
- improve the contacts search
- Optimized for quick answers reject incoming calls and be able to edit quick responses
Zen mode
- Added Zen mode, which helps you to stay away from the screen and return to the 20 minutes of life
Changes
System
- General bug fixes and stability improvements
Weather
- Improved scrolling process to switch between pages
- Weather maps for several cities can now be rearranged or deleted by pressing and holding them
- Optimized user interface that allows you to use this app when the app permission to access the location of the APS is turned off.
Phone
- Best animated effects for switching between pages
- improve the contacts search
- Optimized for quick answers reject incoming calls and be able to edit quick responses
Zen mode
- Added Zen mode, which helps you to stay away from the screen and return to the 20 minutes of life
Bugs
- It does not work read mode
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
Screenshots
 |
 |
 |
 |
 |
Instructions for updating the firmware
1. In TWRP backup partition Data (from Oxygen 9.0.6 or Oxygen33 just in case)
2. Make all wipes are in addition to micro SD card, internal memory and a data section
3. We put the firmware
2. Make all wipes are in addition to micro SD card, internal memory and a data section
3. We put the firmware
Instructions for installing firmware
1. Make wipes are:
-Date (format required if encrypted)
-system
-vendor
-kesh / daklvik cache
2. sews itself firmware
3. Boot the system, go through the initial setup.
-Date (format required if encrypted)
-system
-vendor
-kesh / daklvik cache
2. sews itself firmware
3. Boot the system, go through the initial setup.
Wallpaper
Living and simple wallpaper for OnePlus6: OPWallpaperResources.apk (69.41 MB)
Live Wallpaper "OnePlus 7 Pro" Download: https: //drive.google.c...UICa/view usp = drivesdk?
OPWallpaperResources.apk (69.41 MB)  |
Live Wallpaper "OnePlus 7 Pro" Download: https: //drive.google.c...UICa/view usp = drivesdk?
 |
 |
Patch TWRP splash
(Image to butanimatsii) is displayed as OnePlus, instead of the stock Mi -OP5T_Splash.zip(653.18 KB)
spoiler =Patches
OP5T_Splash.zip(653.18 KB) |
spoiler =Patches
Patches
Patch for DT2W Off (turns the display by double-clicking on the screen) -Patch_dt2w.zip(185.78 KB)
Patch TWRP MIUI camera -miuicamera_whyred.zip(17.65 MB)
Patch TWRP unlimited storage Google Photos -Unlim + google + photo.zip(636,17 КБ)
Patch TWRP Patch_OPAod_OB33 (activation function display ambient raise smartphone to view information) -Patch_OPAod_OB33.zip(4.52 MB)
Patch-up smartphone fingerprintWAKEUP.zip(396.98 KB)
Patch_dt2w.zip(185.78 KB)Patch TWRP MIUI camera -
miuicamera_whyred.zip(17.65 MB)Patch TWRP unlimited storage Google Photos -
Unlim + google + photo.zip(636,17 КБ)Patch TWRP Patch_OPAod_OB33 (activation function display ambient raise smartphone to view information) -
Patch_OPAod_OB33.zip(4.52 MB)Patch-up smartphone fingerprint
WAKEUP.zip(396.98 KB)HOS5T_OB39_PIE-9.0_K-4.9_whyred_multilanguage_221119
 |
Author Sharapa
Firmware : PIE-9.0 HydrogenOS_OB39 Official
changes HydrogenOS_OB39
system
- to improve the stability of the system and eliminate the known problems of
mode of meditation
- Add the function of meditation mode, leave your phone on for 20 minutes and enjoy life
weather
- Optimize the left and right sliding effects
- City maps can be freely adjusted or deleted (card with a long press - to adjust the order of the cards or delete cards)
- Optimize the impression after the rejection of the definition of the weather, you can manually add the city and continue to use the weather
phone
- Optimize the effects of switching pages
- Optimization of the contact list of the indexing process
- Optimization of deviation calls for SMS quick reply and support custom responses
- to improve the stability of the system and eliminate the known problems of
mode of meditation
- Add the function of meditation mode, leave your phone on for 20 minutes and enjoy life
weather
- Optimize the left and right sliding effects
- City maps can be freely adjusted or deleted (card with a long press - to adjust the order of the cards or delete cards)
- Optimize the impression after the rejection of the definition of the weather, you can manually add the city and continue to use the weather
phone
- Optimize the effects of switching pages
- Optimization of the contact list of the indexing process
- Optimization of deviation calls for SMS quick reply and support custom responses
Bugs
- It does not work read mode
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
Instructions for installing the firmware
- pass the original firmware installation settings, select language and set Google + Play + Store + 16.0.15-all.apk and register for your account -Google + Play + Store + 16.0.15-all.apk(19.7 MB)
Google + Play + Store + 16.0.15-all.apk(19.7 MB)https: //drive.google.c...YpujroSZ8c5nojWKDlOYdVPatches
Patch TWRP for DT2W Off (turns the display by double-clicking on the screen) -Patch_dt2w.zip(185.78 KB)
Patch TWRP MIUI camera -miuicamera_whyred.zip(17.65 MB)
Patch TWRP unlimited storage Google Photos -Unlim + google + photo.zip(636,17 КБ)
TWRP patch-up smartphone fingerprint -WAKEUP.zip(396.98 KB)
Note : Bugs such as OnePlus5TOxygen_OB33 + characters instead of the region as a dialer
Patch_dt2w.zip(185.78 KB)Patch TWRP MIUI camera -
miuicamera_whyred.zip(17.65 MB)Patch TWRP unlimited storage Google Photos -
Unlim + google + photo.zip(636,17 КБ)TWRP patch-up smartphone fingerprint -
WAKEUP.zip(396.98 KB)Note : Bugs such as OnePlus5TOxygen_OB33 + characters instead of the region as a dialer
OP5TOxygenOS 9.0.9_PIE_K-4.9_whyred_041119
Author : Sharapa
Firmware : PIE-9.0 OnePlus5T Oxygen 9.0.9 stabile
Changes
System
- Fixed a problem with advanced screenshots
- Updated the security patch for Android to 2019.10
- General bug fixes and improvements
- Fixed a problem with advanced screenshots
- Updated the security patch for Android to 2019.10
- General bug fixes and improvements
Bugs
- It does not work read mode
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
https: //drive.google.c...hwYPQ3sTvF-DhJyoabMSiK Patches
Patch for DT2W Off (turns the display by double-clicking on the screen) -
Patch_dt2w.zip(185.78 KB)Patch TWRP MIUI camera -
miuicamera_whyred.zip(17.65 MB)Patch TWRP unlimited storage Google Photos -
Unlim + google + photo.zip(636,17 КБ)TWRP patch-up fingerprint smartphone
WAKEUP.zip(396.98 KB)OP7OxygenOS_9.5.8_PIE-9.0_KangarooX-4.9_whyred_03102019
Author : Sharapa
Firmware : PIE-9.0 OP7OxygenOS_9.5.8
Changes
System
- Optimized adaptive brightness
- Fixed an issue with the drop down the quick settings menu due to accidental contact during conversation.
- Updated GMS to 2019.06
- Updated the security patch for Android to 2019.08
- General bug fixes and improvements
- Optimized adaptive brightness
- Fixed an issue with the drop down the quick settings menu due to accidental contact during conversation.
- Updated GMS to 2019.06
- Updated the security patch for Android to 2019.08
- General bug fixes and improvements
Bugs
- It does not work read mode
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
Instructions for installing the firmware
1. Make wipes are partition system (required), Vendor, data, dalvik / cache;
2. Who has a section data format f2fs, then put a patch TWRP Patch_fstab_OP7 -
Patch_fstab_OP7.zip(179.63 KB)3. Set the firmware;
4. Pass the initial installation and configuration of EEPROM.Attention, the last step - we go in and install TWRP patch "Patch_vold.zip".
Patch_vold.zip (487.39 KB) https: //drive.google.c...4nQtFtVp4S379WDl-WaNgX Patches
Patch TWRP off DT2wOP7 (turns the display by double-clicking on the screen) -
Patch_dt2wOP7.zip(182.14 KB)TWRP patch to correct goodix fingerprint -
goodix_patch_PIE.zip(630.03 KB)TWRP patch to activate the auto record dialer -
EnableOPOSCallRecording.zip(2.78 KB)The patch changes the shutter 5x2 icons -
Patch_curtain_five_columns-OP7.zip(43.21 MB)magisk module to pass the test SafetyNet -
SafetyPatch-v3.zip(7.69 KB)Patch TWRP FM radio for OP7 -
fm_OP7.zip(6.43 MB)Swift Installer for dark theme -
Swift Installer v9.74 P.apk(33.7 MB)Patch TWRP hostapd + WiFi (access point displays information about the connected subscribers to it) -
Patch_hostapd + WiFi.zip(867.11 KB)Patch TWRP unlimited storage Google Photos -
Unlim + google + photo.zip(636,17 КБ)Patch TWRP MIUI camera -
miuicamera_whyred.zip(17.65 MB)OP7OxygenOS_9.5.8_vendor5T_K-5.3_whyred_011119
- https: //drive.google.c...ok3IpEmuK4cHL8cv1R8u6f Instructions for installing the firmware
1. Make wipes are partition system (required), Vendor, data, dalvik / cache;
2. Who has a section data format f2fs, then put a patch TWRP Patch_fstab_OP7 -
Patch_fstab_OP7.zip(179.63 KB)3. Set the firmware;
4. Pass the initial installation and configuration of EEPROM.Attention, the last step - we go in and install TWRP patch "Patch_vold.zip".
Patch_vold.zip (487.39 KB) Bugs
- It does not work read mode
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
- Do not work correctly without a sound mode.
- When fully charged, the smartphone does not turn off the ice display
Patches
Patch TWRP unlimited storage Google Photos -
Unlim + google + photo.zip(636,17 КБ)TWRP patch updates the graphics library (firmware runs smoother and quicker and smarter) -
Patch__graphics_OP7.zip(1.79 MB)Swift Installer for dark theme -
Swift Installer v9.74 P.apk(33.7 MB)Post has been editedsharapa - 10.12.19, 16:38
Reason for editing: Patch TWRP unlimited Google Photos storage
Nubia RedMagic OS
✔ Firmware Status: Port
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: @Guzram
❗ Bugs
- Ice ID
- Frontalka in native cell
- Frontalka in native cell
^ Installation
- We put TWRP
- We make wipe partitions / dalvik / system / cache / data (internal memory optional)
- Reboot the phone and go back to TWRP
- We sew firmware
- sew Gapps
- Reboot into system
& List of changes
- Unknown
YScreenshots
 |
 |
! Download
Post has been editedNeferon - 08.03.19, 20:05
Bootleggers
✔ Firmware status: Unofficial
DAssembly: 2019.04.04
Based on: AOSP
AAndroid version: Pie 9.0
AGoogle Apps: None
PDeveloper: @ Adi5
& Changelog for Pie FW
It will only work on Pie FW 9.3.28+. Therefore, please ensure that you are on the Pie, before flashing this build.
changes 05/02/19
• Enabled fwb boost
• All btlg stuffs latest
• Fixed vibration Control in kernel
• Upstreamed to 4.4.179
• Clang 9.0.3
• All btlg stuffs latest
• Fixed vibration Control in kernel
• Upstreamed to 4.4.179
• Clang 9.0.3
changes 04/15/19
• All pie blobs from guaiyihu git
• Addressed sensor denial
• Addressed few another
• [TEMP] Guaiyihu kernel inside (maybe will tweak it a little in next release or will use purecoffee after will have pie commits from guaiyihu) for pubg hd for now you need change kernel
• Cleaned up sepolicy
• Removed unused livedisplay hal
• All latest btlg updates
• Goodix works
• Sensors works too ...
Just buggy can be gcam recording in 4k
• Addressed sensor denial
• Addressed few another
• [TEMP] Guaiyihu kernel inside (maybe will tweak it a little in next release or will use purecoffee after will have pie commits from guaiyihu) for pubg hd for now you need change kernel
• Cleaned up sepolicy
• Removed unused livedisplay hal
• All latest btlg updates
• Goodix works
• Sensors works too ...
Just buggy can be gcam recording in 4k
& Changelog for Oreo FW 04.04.19
4.1 Hotfixes + April SP merged!
There are some extra issues to solve but for now, we'll leave that to 4.2. With the addition of the april security patch, we did the following changes:
* Fixed a system hang caused by disabling edge gestures (credits to jenslody)
* Themed All apps search bar on Launcher3
* Updated Links on Dumpster>I’ve been able to come back soon :(
* Fixed a derp with the ShishuOTA overlay on Shishu Nights
* Added missing permissions for Pixel / Devices without debug props for permissions.
* Added some missing headers on OmniStyle
* Fixed glitch cover art and grayscaled + blurred cover art.
Hope now everything is nice for some weeks, and we'll start on working on 4.2 soon and we hope that we can release it on may. Until then, see ya and have fun with this nice release>:]
There are some extra issues to solve but for now, we'll leave that to 4.2. With the addition of the april security patch, we did the following changes:
* Fixed a system hang caused by disabling edge gestures (credits to jenslody)
* Themed All apps search bar on Launcher3
* Updated Links on Dumpster>I’ve been able to come back soon :(
* Fixed a derp with the ShishuOTA overlay on Shishu Nights
* Added missing permissions for Pixel / Devices without debug props for permissions.
* Added some missing headers on OmniStyle
* Fixed glitch cover art and grayscaled + blurred cover art.
Hope now everything is nice for some weeks, and we'll start on working on 4.2 soon and we hope that we can release it on may. Until then, see ya and have fun with this nice release>:]
❗ Bugs
- Unknown
DInstallation Instructions
1.Delaem wipes are:
-date of
-system
-vendor
-kesh / daklvik cache
2. sews itself firmware
3. sewn Gapps
5. Boot the system
6. pass and set in TWRP Magisk (optional)
-date of
-system
-vendor
-kesh / daklvik cache
2. sews itself firmware
3. sewn Gapps
5. Boot the system
6. pass and set in TWRP Magisk (optional)
DOf. page and source code
Post has been editedNeferon - 02.05.19, 17:26
HavocOS Official
Created:
Ruturaj Kadam
Ruturaj Kadam
∞�{♦}�������������{♦}�∞
Versions:
2.7
HavocOS
9.0 Pie
Android
02.08.2019
Last update
∞�{♦}�������������{♦}�∞
References:
∞�{♦}�������������{♦}�∞
Description
HavocOS based on AOSP, inspired by Google Pixel'em.
Has an exquisite "Material Design 2" from @SKULSHADY.
A lot of features that you probably will not find in any firmware.
All that you can dream of, and all you will ever need is available in HavocOS.
Just ask and enjoy ...
Has an exquisite "Material Design 2" from @SKULSHADY.
A lot of features that you probably will not find in any firmware.
All that you can dream of, and all you will ever need is available in HavocOS.
Just ask and enjoy ...
Changelog
âš¡Device Changelog -
• Added overlay to set white color unconditionally
• Allow 120fps video recording
• Illusion Kernel prebuilt
âš¡ROM Changelog -
• Added Gesture Anywhere
• Added NFC Sounds
• Added translations for Text Clock
• Changed Text Clock color to Wallpaper based
• Improved Battery Estimates
• Improved Pocket Lock
• Improved App info
• Improved Sound settings
• Fixed PiP for Multi-user
• Removed QS tile overlays from app list
• Updated Lawnchair to alpha-2338
• Added Gaming mode QS tile
• Improved Gaming mode
• Improved OP gestures feedback duration
• Improved Aggressive battery
• Improved LiveDisplay
• Fixed crash with some music players
• Performance improvements
• Other fixes and improvements
• Added overlay to set white color unconditionally
• Allow 120fps video recording
• Illusion Kernel prebuilt
âš¡ROM Changelog -
• Added Gesture Anywhere
• Added NFC Sounds
• Added translations for Text Clock
• Changed Text Clock color to Wallpaper based
• Improved Battery Estimates
• Improved Pocket Lock
• Improved App info
• Improved Sound settings
• Fixed PiP for Multi-user
• Removed QS tile overlays from app list
• Updated Lawnchair to alpha-2338
• Added Gaming mode QS tile
• Improved Gaming mode
• Improved OP gestures feedback duration
• Improved Aggressive battery
• Improved LiveDisplay
• Fixed crash with some music players
• Performance improvements
• Other fixes and improvements
Installation method
How to install:
How to upgrade:
- Download the archive with the firmware and throw it in a convenient place for you. Desirably MicroSD / USB flash drive (OTG).
- We go in TWRP.
- Making cleaning sections System, Vendor, Data, Cache, Dalvik, internal memory.
- Install zip-archive with the firmware.
- Set GApps. Optionally, you can install Magisk (Ruth).
- Reboot into the system.
How to upgrade:
- Download the archive with the update.
- We go in TWRP.
- Install zip-archive with the update.
- If purified System, Vendor, then install GApps. Optionally, you can install Magisk (Ruth).
- Making Cache purification, Dalvik.
- Reboot into the system.
Additions
Screenshots
∞�{♦}�������������{♦}�∞
Post has been editedmicky228 - 03.08.19, 00:01
Reason for editing: Updating.
Bootleggers unofficial
Created: Senthil, Scorpion Dark Prince.
Last update: 09.03.2019.
Version: 4.0 Stable.
Android: 9.0 Pie.
Description
Bootleggers unofficial version of the firmware, the creators assembled Candy Unofficial core and Dark Magic Kernel. The firmware is based on AOSP and stable.
Installation method
How to install:
How to upgrade:
- Download the archive with the firmware and throw it in a convenient place for you. Desirably MicroSD / USB flash drive (OTG).
- We go in TWRP.
- Makes cleaning partitions System, Vendor, Data, Cache, Dalvik, the internal memory.
- Install zip-archive with the firmware.
- Set GApps. Optionally, you can install Magisk (Ruth).
- Reboot into the system.
How to upgrade:
- Download the archive with the update.
- We go in TWRP.
- Install zip-archive with the update.
- Set GApps. Optionally, you can install Magisk (Ruth).
- Making Cache purification, Dalvik.
- Reboot into the system.
Changelog
09.03.2019
* Initial build
* March security patch-android-9.0_r34
* Latest derp kernel-v5.0
* Updated blobs
* Synced with Latest bootleggers source
* Fixed power menu issue
* Launcher rebase.
* March security patch-android-9.0_r34
* Latest derp kernel-v5.0
* Updated blobs
* Synced with Latest bootleggers source
* Fixed power menu issue
* Launcher rebase.
Download:
here
here
Post has been editedmicky228 - 13.03.19, 19:10
Android One
✔ Firmware Status: Port
AAndroid version: Pie 9.0
AGoogle Apps: embed
PDeveloper: @ speedo.thc
❗ Bugs
MTP: sometimes can not connect
Solution 1: Select "usb tethering", and then "File transfer" and click OK.
Solution 2: Settings->About phone>Activate razrabotchika- settings>
=>Developer settings, choose the connection mode and choose "Data Transfer"
Solution 1: Select "usb tethering", and then "File transfer" and click OK.
Solution 2: Settings->About phone>Activate razrabotchika- settings>
=>Developer settings, choose the connection mode and choose "Data Transfer"
^ Installation
- We put TWRP
- Making partitions wipe / dalvik / system / cache / data / vendor (internal memory optional)
- Reboot the phone and go back to TWRP
- We sew firmware
- Reboot the system and configuration
- Reboot into TWRP
- sew Magisk
- Reboot into system
& List of changes
changes 03/21/19
• fix audio "flac" issue + other formats
• fix video call for whatsapp
• fix carrier manual (broken on v2.1)
• reworked "in-call sound" using fluence
• remove vndk-28 libs (useless for us)
• remove adb notification (it bored me)
• fix video call for whatsapp
• fix carrier manual (broken on v2.1)
• reworked "in-call sound" using fluence
• remove vndk-28 libs (useless for us)
• remove adb notification (it bored me)
***************************************
changes 03.03.2019
On v2.1 Full 2019-03-03
• Update to Mi A2 rom V10.0.4.0 (19/02/2019)
• Security patch 02.05.2019
• fix adb support
• fix screencast
• Add init.d support (for Fluid N.G)
• Add missed Terminal
• Unfreeze Mi Backup / Restore
• Removed Maps and Youtube
• Move to One kernel v1.0
oPTIONNAL:
• Add Gesture (Fluid N.G)
• Add Music (AOSP)
• Add VLC video player
• Add Firefox Web browser
• Add Qwant Web browser
• Add App lock (need root)
• Add FireWall (need root)
This version requires a clean install!
• Update to Mi A2 rom V10.0.4.0 (19/02/2019)
• Security patch 02.05.2019
• fix adb support
• fix screencast
• Add init.d support (for Fluid N.G)
• Add missed Terminal
• Unfreeze Mi Backup / Restore
• Removed Maps and Youtube
• Move to One kernel v1.0
oPTIONNAL:
• Add Gesture (Fluid N.G)
• Add Music (AOSP)
• Add VLC video player
• Add Firefox Web browser
• Add Qwant Web browser
• Add App lock (need root)
• Add FireWall (need root)
This version requires a clean install!
***************************************
changes 12.20.2018
On v1.8 update 2018-20-12 (OTA)
• Kernel 4.4.168-rebirth-v2.8
• Wifi files from MiA2 (vendor)
• Improve Sounds (incall + loud speaker)
• Fix Fingerprint action
• Add missed calculator
• Kernel 4.4.168-rebirth-v2.8
• Wifi files from MiA2 (vendor)
• Improve Sounds (incall + loud speaker)
• Fix Fingerprint action
• Add missed calculator
***************************************
changes 12.12.2018
On v1.7 update 2018-12-12 (OTA)
• Fix sound out to Loud Speaker in call issue
• Fix sound out to Loud Speaker in call issue
***************************************
changes 11.12.2018
On v1.6 update 2018-12-11 (OTA)
• Fix bug "Krackle" sounds in music games
• Fix bug "Krackle" sounds in music games
***************************************
changes 10.12.2018
On v1.5 update 2018-12-10 (OTA)
• Add Safety Net Pass support (Unroot / Root)
• Add Safety Net Pass support (Unroot / Root)
***************************************
changes 08.12.2018
On v1.4 update 2018-12-08
• Add OTA support stuff Android File Host
• Add OTA support stuff Android File Host
***************************************
changes 07.12.2018
On v1.3 full rom 2018-12-07
• Add FM Radio stuff
• Update kernel 4.4.166 -Rebirth-v2.4
• Add FM Radio stuff
• Update kernel 4.4.166 -Rebirth-v2.4
***************************************
changes 04.12.2018
On v1.2 Patch02 2018-12-04
• Fix Goodix sensor issue
• Fix Goodix sensor issue
***************************************
changes 01.12.2018
On v1.1 Patch01 2018-12-01
• Fix Blutooth issue
• Fix Blutooth issue
***************************************
changes 11.29.2018
On v1.0 Initial 2018-11-29
• Patch Camera support (Miui + Gcam)
• Patch system (init)
• Patch vendor (dirac sound)
• Patch ramdisk (boot)
• Adapt built (s) prop to whyred
• Kernel 4.4.164-rc1-Rebirth-v2.3
• Add Busybox 1.29
• Add Mix Explorer
• Modified bootanimation (dark)
• Patch Camera support (Miui + Gcam)
• Patch system (init)
• Patch vendor (dirac sound)
• Patch ramdisk (boot)
• Adapt built (s) prop to whyred
• Kernel 4.4.164-rc1-Rebirth-v2.3
• Add Busybox 1.29
• Add Mix Explorer
• Modified bootanimation (dark)
YScreenshots
 |
 |
 |
! Download
Post has been editedNeferon - 23.03.19, 23:22
Reason for editing: Screenshots
Mokee os
Sitehttps://www.mokeedev.com/en/
Updates:
https://download.mokeedev.com/?device=whyred
Description:
The firmware is based on the source code LineageOS Android Pie.
Performance.
Firmware fromMoKee ROMIt ensures the smooth operation of your device without lags and was fading. This makes your device run faster and thus helps you to easily handle it.
Customizable themes.
The firmware allows you to include a dark subject, choose an accent color. It allows you to apply themesSubstratum.
The latest security patches.
MoKee ROM releases monthly updates with the latest security updates as soon as they release Google.
P.S. The properties of the firmware on March 12, 2019. stated that the security patch from 01.01.2019g. Perhaps the builders do not correct the date in build.prop.
GApps'y built in the Developer section of the menu there is a section "superuser", but it does not contain any options. Obviously, the superuser will arise only after Magisk firmware.
Built-in launcher -Lawnchair . I recommend to familiarize yourself with its capabilities in the relevant subject:
Lawnchair (Post DvaderFun # 62940535)
Keyboard Gboard.
Built-in browser Via.
Built-in media player - Phonograph.
Performance.
Firmware fromMoKee ROMIt ensures the smooth operation of your device without lags and was fading. This makes your device run faster and thus helps you to easily handle it.
Customizable themes.
The firmware allows you to include a dark subject, choose an accent color. It allows you to apply themesSubstratum.
The latest security patches.
MoKee ROM releases monthly updates with the latest security updates as soon as they release Google.
P.S. The properties of the firmware on March 12, 2019. stated that the security patch from 01.01.2019g. Perhaps the builders do not correct the date in build.prop.
GApps'y built in the Developer section of the menu there is a section "superuser", but it does not contain any options. Obviously, the superuser will arise only after Magisk firmware.
Built-in launcher -Lawnchair . I recommend to familiarize yourself with its capabilities in the relevant subject:
Lawnchair (Post DvaderFun # 62940535)
Keyboard Gboard.
Built-in browser Via.
Built-in media player - Phonograph.
Screenshots
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Personal experience
- I use this firmware more than a month after a long experience with Havok firmware, AOSiP, PE, Siberia, Resurection Remix;
- by and large, this firmware is not much different from many others. It is stable and is updated frequently;
- Updates are very frequent: the last time they go out on a daily basis (reminiscent of the night update from CyanogenMod, who remembers);
- personally I have everything working and not going to change it to something else.
- by and large, this firmware is not much different from many others. It is stable and is updated frequently;
- Updates are very frequent: the last time they go out on a daily basis (reminiscent of the night update from CyanogenMod, who remembers);
- personally I have everything working and not going to change it to something else.
Energy saving
Like many firmware, energy conservation is highly dependent on the time elapsed since the last update (the system needs to be earned extra) and the level of screen brightness.
To control the flow battery using the app EX Kernel Manager® EX Kernel Manager (Andriy2i # 35269880 Fasting)In this application there is a battery consumption monitor mode in the operating mode, and in idle mode. Other firmwares I have in operation the battery consumption was 7-8% per hour, in this firmware (only after an overnight "running-in" system) - 4.5-5.5% per hour, ceteris paribus.
To control the flow battery using the app EX Kernel Manager® EX Kernel Manager (Andriy2i # 35269880 Fasting)In this application there is a battery consumption monitor mode in the operating mode, and in idle mode. Other firmwares I have in operation the battery consumption was 7-8% per hour, in this firmware (only after an overnight "running-in" system) - 4.5-5.5% per hour, ceteris paribus.
Post has been editedfaorekh - 29.05.19, 15:45
Reason for editing: Mirror is overdue, the author of the post no longer takes this firmware.
 |
PORT ZenUI 5 from Zenfone 5
✔ Firmware Status: beta (build: 20190214)
Based on: AOSP
AAndroid version: Pie 9.0
AGoogle Apps: Present
PDeveloper: Guzram
❗ Bugs
- Deepsleep (trouble sleeping)
In this build replaces native kernel on PureCoffee-Espresso!
In this build replaces native kernel on PureCoffee-Espresso!
^ Installation
- Making partitions wipe / dalvik / system / cache / data (internal memory optional)
- Reboot the phone and go back to TWRP
- Set the port
- Loaded into the system, go through the initial setup, go to settings - additional - auxiliary instruments and where it is desirable to disable all item (s emergency aid is not touched) for a better autonomy
& List of Changes -20190126, 20190214
- Includes ROG PixelMaster camera by linuxct
ASUS camera is now working, but you need to manually set the configuration for the front of the camera!
20190214
- updated to official ver 74
- vendor base to ancient latest
- fixed zenimoji
- fixed audiowizard headset issue
- etc
20190126
- updated to official ver 58
- vendor base revert
- fixed notch thing, no more cutout area
- fixed fp wakeup
- fixed volte thing
- fixed the gapps thing, if still give playstore problem or slow connection, reflash gapps from opengapps
- f2fs support
ASUS camera is now working, but you need to manually set the configuration for the front of the camera!
20190214
- updated to official ver 74
- vendor base to ancient latest
- fixed zenimoji
- fixed audiowizard headset issue
- etc
20190126
- updated to official ver 58
- vendor base revert
- fixed notch thing, no more cutout area
- fixed fp wakeup
- fixed volte thing
- fixed the gapps thing, if still give playstore problem or slow connection, reflash gapps from opengapps
- f2fs support
YScreenshots
 |
 |
 |
 |
 |
 |
Post has been editedsharapa - 30.04.19, 15:06
Reason for editing: The point of installation added extra. more info
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement