Instructions to transfer your current firmware file on f2fs system saves data: (Hereinafter meant that the section of media, images, videos, downloads and others. Important information you will transfer or not survive on their own. This option describes the preservation of the current firmware to your current stack of programs, if they are recorded on the internal memory card)
1. Ensure that your current firmware version and installed the kernel supports f2fs. Otherwise, to update these.
2. establish twrp with guaranteed support f2fs. (E.g., OrangeFox9.1)
later in the twrp:
3. To back up the partition, at least, Boot, System, Data, Vendor. Desirably the outer microSD or OTG usb. This will save your current firmware in the case of failure.
4. perform cash conversion and data sections in the file system f2fs (could be, and section vendor, system, cust, but about f2fs performance in these and other areas of the developers said the fox that this will never happen: coldly:). On the example of orangefox 9.1 is the cleaning menu expanded ochistka->select the section below under Options ->change FS->choose f2fs.
5. Press the top of the gear and select twrp main menu:
use rm fs instead of formatting
6.
Restore partition data saved in step 3 through the recovery menu
7. Boot the system.
ps. speed, and it can not add extra, but someone thinks that the work with the data in that file system will prolong the life of your device.
perhaps the same should be done with an external micro SD, but it's not exactly: D
Post has been editedtory_ad - 16.02.19, 11:58