Development and porting of GSI firmware
Architecture What do you use?
Architecture.
arm64-ab [ 970 ] ** [46,19%]
arm64-a [ 776 ] ** [36,95%]
a64-ab [ 128 ] ** [6,1%]
a64-a [ 55 ] ** [2,62%]
arm-ab [ 13 ] ** [0,62%]
arm-a [ 158 ] ** [7,52%]
Total Votes: 2,100
 



Rep: (2506)
Development and porting of GSI firmware


Supported Devices







Be sure to read!
Dear users!
I remind you that our section is called«Android - Development and Programming» , Which means that the topic is primarily intended for developers.

thereforetoday the topic is prohibited to discuss the nuances of the GSI-specific firmware on devices. All of these issues are discussed in the topics rom your devices in the section «Android - Firmware."
This is an official warning.For ignoring this warning particularly stubborn will receive read-only mode ( "read only")
.

Thank you for understanding! Have a nice chat.


Read a must.
For the report / review, the problem report.
Development and porting of GSI-firmware (Post derak1129 # 95942923)


Description
What is Project Treble?

Project Treble shares low-level drivers and the rest of the operating system so that manufacturers and third-party developers can release updates faster and easier. For devices with Android 8.x Oreo "out of the box" support for Treble is a must, and for older smartphones and tablets the option is available.

Instructions
Firmware
Template for the design of the post with the firmware

Lite GSI Images- Trimmed Images From firmware zerovoid
Patches for starting firmware gsi.
Android All GSIs

Android 11.x.x


Android 10.x.x
Firmware from Igor ~ s
Collection of firmwareby Igor ~ s


Android 10 release



Android 9.x.x


Android 8.x.x


Problem solving
Useful


Topics Curator KazukiAmazui . On the renewal and updating of the caps, please contact QMS

Post has been editedKazukiAmazui - Yesterday, 20:31
Reason for editing: AOSP Android 11



Rep: (1151)
Development and porting of GSI-firmware (Post zerovoid # 91828278)

CAOSv222 2020.08.08 // All Platforms


.

Post has been editedzerovoid - 09.08.20, 08:23



Rep: (39)
* AlexeyLetov42 , Fully support. Without any disco - I picked up and went. Great autonomy, smooth operation, both from the ground and after the piled their applications.
Tel. - Zoji 9 / arm64 A
Vendor 8.
Author fashion thanks, great modification.



Rep: (10)
Good day forum, put it on your device firmware LineageOS Q Mod, on my opinion this is the best and the flying piercing, at least on my phone.
---------------
So, I noticed a few stocks,
1- The computer does not see the device when connected via USB.
2 very small volume, it is impossible to hear anything.
3- Neto face scanner, although there is controversial or negative is a plus.
----------------
The device - Samsung Galaxy A105F
Firmware - LineageOS 17.1 Q Mod
Architecture - A64 A / B
----------------
If you know how to fix these problems please accomplish your goal, or poke his nose where it is written decision.



Rep: (1151)
* nravnonefanat, kind
1. This is a known problem of Samsung. usually chinitsya assembly of a custom kernel with the included MTP hack - how to do it, I do not know
2. look sound mixer configuration files somewhere in the / system / etc. You can try to take the values ​​of the other firmware, where the sound is good. details do not know, I have a normal volume
3. will be only when Google will return the code in android this opportunity



Rep: (5)
ON Mtk 6739 (arm64a), vendor 8.1 = BLESS v221 excellent, got up quickly, without drums. Magisk hh and franca beg properly. Offline charging itself can not!

R.S .: I think that with the firmware kernel at the beginning of a better start.



Rep: (32)
* ArNeCat ,
zzz58 @ 9.08.20, 15:57 *
Offline charging itself can not!

I just copied into the system / etc / charger 224 charging graphics file format .png for your screen resolution



Rep: (145)
Riveted overlay. Round corners, blue accent to do all things ... for the emulator (AOSP firmware there ugly: girl_cray:). Maybe someone will come in handy. Sawed for Android 10 may 9ke on and earn eight.
Connect a device, run the batch file, it will make everything for you: D
Attached Image

: Download: DOWNLOAD !!!Attached filefix_overlay.zip(6.65 MB)



Rep: (222)
Feedback on firmware

Device: Xiaomi Mi A2 Lite 3/32 | ARM64 A / B
Base: 8.1 ( V9.6.11.0.ODLMIFF )
Firmware: LineageOS Q Mod // LOSQ

Firmware is good. I agree, smooth and fast system, after the user software does not lose advantages. Firmware for daily work. Functionality is not so rich, but high stability. All the necessary functions for I have

GPS works correctly, mob. network works, a clear chamber, the battery does not melt. All transducers and sensors work well

Also installed Magisk v20.4 - problems with him found it works fine

This firmware, perhaps better thanBlissROMs Q Mod // BLESS- LOSQ faster and more stable, and in BLESS too many unnecessary features



Rep: (21)
zerovoid @ 11.02.20, 21:23*
LineageOS Q Mod // LOSQ

Vendor 8.1, mt6750, arm64 Aonly.
The first impression, it could be called a masterpiece all versions Leneek, just super! All those involved in this fashion, thank you very much for your efforts.

Post has been editedIvangrad - 12.08.20, 19:08



Rep: (1151)
Development and porting of GSI-firmware (Post zerovoid # 93807981)

updateLOSQv222 2020.08.13 // All Platforms + gapps

Attached images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedzerovoid - 14.08.20, 09:58



Rep: (877)
Surprisingly, AncientOS-CIVILIZATION-v3.9 - just 3.9 - bad lay on my iron: MT6763 (Helio P23). 3.8 - great! whatIndiansMalays nakompilirovali? Or Igor podshamanil? : Lol: The feeling that the sensors are not functioning. Slowly fall off. I set completely, if anything, with all wipe. Forced to revert to 3.8. Long I suffered, hoped for the best - but not, in general, all came off.

Post has been editedViSet - 14.08.20, 11:58
Reason for editing: for Malaysians corrected



Rep: (613)
Resurrection Remix

Android: 10
Firmware Version: 8.5.8
Author: Expressluke

Firmware based Lineage OS with a variety of expansion options. Google built there.
Screenshots
Bugs
1. Depends on the vendor
2. No service at MTC.


What works and what bugs on my phone

Download:all architectures

While available test ARM / ARM64 assembly. The rest later.

Post has been editedskittels15 - 26.08.20, 16:04



Rep: (613)
*Feedback onRR 8.5.8
Device: Xiaomi Redmi 8
Architecture and processor: ARM64-AB, SD 439
Vendor: MIUI 11.0.1 RU, Android 10 / MIUI 11.0.6 RU, Android 9

And notice what works equalizer navbare (unlike Bless Mod), the brightness does not need to include a "linear slider" in the PQQ settings. Video recording is also working on a kernel without katabatic fixes and PQQ settings. Gradients working in the Enforced. The sensors also do not fall off. Weather OWM works without api-key. There are custom settings for the bangs. Also works offline charging a few seconds shows the battery, then the screen fades out as the drain. Even the power saving modes, and high accuracy for GPS works. Other firmwares generally they are not.

Customization even more than I expected. In the past RR (Pie, Oreo, Nougat) settings have been less.

Bugs:
-Vendora (as always in the Chinese stock namudrili):
--zvuk not work over Bluetooth, all went through the phone's speakers. Also fixed quite easily.
-Proshivki:
--Not apply overlays devices, in fact, stated in their function too.
--Punkt Auto Brightness is, but it does not work.
--Nochnoy mode does not work.
--LiveDisplay does not work either.

Post has been editedskittels15 - 08.09.20, 12:26
Reason for editing: About Bugs



Rep: (1151)
crDRom v222test assembly R1
https: //sourceforge.ne...rom/files/crDRom/test-R1/

• put only clean
• Check the operation of the mobile network
• all platforms except the arm ab


checked :
Redmi 7A - communication works
Samsung S20 - FOD communication and work
Samsung A50 - FOD communication and work
Samsung A30 - communication works (+ call recording)
Samsung J5 Prime - communication works
Xiaomi Mi A2 lite - communication works (+ call recording)
Realme 3 MT6771 - Sims can not see
Tecno Spark Go MT6761 - Sims can not see
MEIZU M2 MINI MT6735 - does not see
DOOGEE s68pro Mtk6771 - no

All clear on the MTK is not due (As well as in some other firmwares)
Thank you all for the feedback and see how you can solve the problem, and even in the little things necessary to comb Proshka

Attached images
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedzerovoid - 16.08.20, 23:05



Rep: (26)
Feedback on firmware

It turned out to runBlissRoms
Device:micromax q440
Vendor: stok 8.1
Arm a

Firmware nimble like a very


Bugs: Do not operate a mobile access point, and why it throws when I want to adjust the face Haydee.



Rep: (2)
I have read and found a hatDevelopment and porting of GSI-firmware (Post Skyrimus # 80539089)
after overrunning the firmware install this patch, then another filing device manually - does not help
are there any effective methods of certification of the device?



Rep: (613)
* pyles , Create a secure file in the / system / phh and do wipe data or format data ->yes. The truth is still in the internal memory will be deleted.

Here's another way toandone more

Post has been editedskittels15 - 16.08.20, 13:25



Rep: (1151)
Development and porting of GSI-firmware (Post zerovoid # 95184224)

crDRom v222 2020.08.16 // All Platforms + gappsy



Rep: (2675)
ZenX-OS-v1.8 Android 10 GSI
Test, quick assembly. Interesting new firmware is based on AOSP.
ZenX-OS-v1.8-arm64-ab-vanilla
ZenX-OS-v1.8-arm64-a-vanilla
ZenX-OS-v1.8-a64-ab-vanilla.img
ZenX-OS-v1.8-a64-a-vanilla.img
ZenX-OS-v1.8-arm-ab-vanilla
ZenX-OS-v1.8-arm-a-vanilla

Attached images
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedIgor ~ s - 20.08.20, 16:52



Rep: (404)
skittels15 @ 15.08.20, 23:09*
Firmware - do not apply overlays devices. Auto Brightness item is, but it does not work. Night mode does not work.
Snape at 630, Sharp C10 everything works fine, and Auto-Brightness and night sea rezhim.Kastomizatsii really, really helped magiska module to translate dop.nastroek (there is a post with the screen), the battery keeps the rules.

Post has been editedPalych11 - 20.08.20, 16:55


Full version    

Help     rules

Time is now: 29/09/20, 1:03