Mistakethis miui version can't be installed on this device (recovery) and You are not authorized to download (Miflash)
In general, if anyone is interested. In continuation
Themes of my brick.
After a week of unsuccessful attempts to restore.
Who has not seen a single whale firmware. With mistakes
this miui version can't be installed on this device (recovery) and
You are not authorized to download (Miflash)
The case is extraordinary, but already takes place not only for me,
No recovery method from the header (and not only), unfortunately not rolled (.
After auto update, the bootloader is locked.
I tried the firmware of various versions, the firmware of mythlesh of various versions, mythlesh about, qfil .... changed a bunch of files of all sorts of prog_emmc_firehose_whyred and not only ....
Silo either global (which did not start the recovery with the aforementioned error
"This Miui Version CAN't BE Installed .."), or nothing.
At absolutely all Chinese firmware there were completely errors when starting the firmware for any scenarios and replacements.
Instruction
I bet (who did not put) drivers for the mode 9008
//savagemessiahzine.com/forum/d...ader+HS-USB+Driver.zip** On windows 8.1 and above before installing, be sure to turn off the driver signature check (external link, how to do it
https://remontka.pro/d...gital-signature-check/ ).
After that, you disassemble the phone, turn off the battery and contact the contacts to the EDL mode.
Transition to EDL.
Turn off the battery, closer tweezers two contacts as in the photo and not blurred insert cable already connected to a PC
Read more
here battery After entering EDL
Do not connect before the end of the firmware .
* According to reviews: If it still does not sew, then in some cases helped holding EDL contacts are closed at the time of the firmware start (or before the firmware). Personally did not check, but people unsubscribe, which was silent so or so
If the flash driver requests accounts - try changing PCs to reinstall the driver The firmware is already in the archive with the firmware, we use this version. I took the firmware whyred_images_9.5.30_20190530.0000.00_9.0_cn (by the way I tried at the very beginning, and later, but then it did not work)
Replaced two files (prog_emmc_firehose_whyred ...)
Translated into EDL,
At the bottom of the exhibitionClean all - The firmware went.
All files for FirmwareGoogle drive (Flasher (went through a bunch, stitched only on it) + firmware + insurcoker loader).
** The firmware in the archive is already replaced by prog_emmc_firehose_whyred files ....
After recovery We translate into fastbut and try unlocking the bootloader (software in the archive). I have trial 168 hours (1 week).
After unlocking the bootloader , I advise you to install the TVRP, // it will save from further hemorrhoids //
I have installedZerg_mos_3.3.. In it, the installer immediately patches and TVP does not fall off after loading + the memory correctly sees.Now you can install any firmware.
I tried a few, stopped onRedminote5_miui_9.6.13_mirom_9.0.It is the maximum stock and feel stable as possible, which was required.
If anyone is useful in general. The task was to raise the body from the state of the semi-criming.
I tried to briefly facilitate the understanding of the issue for beginners.
Successful recovery!
Post has been editedhum3 - 13.12.19, 16:32Reason for editing: Reduced to the maximum.