Xiaomi Redmi Note 5 - MIUI firmware
under the messages to which you want to add links. 5Vision @ 10.06.19, 13:54
It is best to raise this firmware with a full loader lock and pass the official unlock:
I know what is better, but I have dozens of devices, and there are so many accounts.
Do not tell me through the MI Flash flashing in EDL mode pops up the CANNOT Receive Hello Packet Erorr error in what is the problem?
[email protected], 14:10
Do not tell me through the MI Flash flashing in EDL mode pops up the CANNOT Receive Hello Packet Erorr error in what is the problem?
Your phone does not respond to a request from MI Flash. Reconnect the phone in the EDL without a battery naturally.
Tell me. Put Masik 5 for 9 Androd, began to warm the phone in the games, Pubg so generally trolleys even with GFX before it was not true! In the Antutu monitor shows the constant loading of the processor, even though applications do not hang. What is the reason?
Just turned off the dark theme, like the load slept, maybe because of it?
Post has been editedgyord - 10.06.19, 11:55
 |
Just turned off the dark theme, like the load slept, maybe because of it?
Post has been editedgyord - 10.06.19, 11:55
Reason for editing: spoiler
Guys. I sit on the Chinese firmware 10.2.2 oeicnxm, stable
Soon you will unlock the bootloader. I want to put the global 9.5.19.0
Can I roll back?
Soon you will unlock the bootloader. I want to put the global 9.5.19.0
Can I roll back?
Everyone is written that the problem with the update to 9 android. My friend MEE7S, the loader is unlocked by it. Updated by air calmly at 10.3.1 global
Ramoj , Yes. Posted on 10.06.2019, 11:27:
Ramoj , I also have. Just have phones fully unlocked, and there is a broken loader, hence the problem Ishei , stitching as well as did before. According to the instructions. But most likely you have a Vietnamese. HereHyde how to reflash
AKR.RKA @ 10.06.19, 08:22
After the upgrade to the 9 th android, there was a problem with the video to a memory card.
The card was installed in February, and worked perfectly. saving to SD-card take pictures and videos has been set up in the chamber.
Now the big picture continues to remain an oddity and video in any does not want to.
After you stop recording the video to the camera, it hangs in an attempt to complete the save.
Also through a gallery does not delete photos / videos from the memory card, just, select a photo, a command removal, photo from the gallery disappears, and the process of all this, any error messages, or places without rights, but when you restart the gallery see Cho everything is in place, nothing not removed.
CameraMX tried another camera set up in her preservation to SD-card (create a new folder for it directly from the folder selection dialog in the camera settings in the root), and everything is saved.
What a "canoe"? Who can faced or knows how to overcome, please help.
The card was installed in February, and worked perfectly. saving to SD-card take pictures and videos has been set up in the chamber.
Now the big picture continues to remain an oddity and video in any does not want to.
After you stop recording the video to the camera, it hangs in an attempt to complete the save.
Also through a gallery does not delete photos / videos from the memory card, just, select a photo, a command removal, photo from the gallery disappears, and the process of all this, any error messages, or places without rights, but when you restart the gallery see Cho everything is in place, nothing not removed.
CameraMX tried another camera set up in her preservation to SD-card (create a new folder for it directly from the folder selection dialog in the camera settings in the root), and everything is saved.
What a "canoe"? Who can faced or knows how to overcome, please help.
Incidentally supplemented. Update flew through the air unit with Block loader with the original stable system. Previously, when you upgrade to MIUI 10 everything went without a problem, as in the air, and now with the new update to the Droid 9th issue.
What is not clear where to dig.
PS: MIUI Global 10.3.1 | Stable 10.3.1.0 (PEIMIXM)
Ramoj, Xiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware
If you look at the description, then 9.5.19.0 also ARB 4 must be without problems. Do not locate only the bootloader again, putting a check mark no))
Good afternoon, confused little with questions over flashing. I ask for help / council.
There is a telephone Redmi Note 5 (on the building sticker in Chinese, the model is indicated by MEE7S). At the moment, the firmware MIUI 10.3 STABLE 10.3.4.0 Android 8.1.0 is installed, there is no Russian language in the phone, the loader is blocked. Actually, you need to fasten the Russian language. As I understand it, you need to flash on the global version, the last global version is indicated 10.3.1.0 (there are two of them with such an index - Android 9 and Android 8, interests 8).
The question is whether it is possible to flash on 10.3.1.0 global stable with a blocked loader, or be sure to unlock? And it will be considered as a rollback or not?
Post has been editedbu2bu2bu - 10.06.19, 11:57
There is a telephone Redmi Note 5 (on the building sticker in Chinese, the model is indicated by MEE7S). At the moment, the firmware MIUI 10.3 STABLE 10.3.4.0 Android 8.1.0 is installed, there is no Russian language in the phone, the loader is blocked. Actually, you need to fasten the Russian language. As I understand it, you need to flash on the global version, the last global version is indicated 10.3.1.0 (there are two of them with such an index - Android 9 and Android 8, interests 8).
The question is whether it is possible to flash on 10.3.1.0 global stable with a blocked loader, or be sure to unlock? And it will be considered as a rollback or not?
Post has been editedbu2bu2bu - 10.06.19, 11:57
BU2BU2BU @ 06/10/19, 11:56
Is it possible to flash on 10.3.1.0 Global Stable with a locked loader
No, it is necessary
BU2BU2BU @ 06/10/19, 11:56
Be sure to unlock
BU2BU2BU @ 06/10/19, 11:56
Is it possible to flash on 10.3.1.0 Global Stable with a locked loader, or be sure to unlock?
It can not be brick. It is necessary to unlock the bootloader, and then sew the global. Morelocale-2 APK. Partially solves the problem with the Russian language
Hello everyone :) It myself collided with the problem after updating the Chinese NOT 5 with a unlocked loader on the 9th Android and the upgrade of ARB before 4. After upgrading the loader was born myself.
So ... in this topic did not find a solution. Everyone has not been stuck. But I found it on XDA, I post the translation.
Way forMiFlash .
Files to download:
Miflash 2018.
Prog Emmc Firehose Elf (Patched)SpasibkiChocoml
Firmware with ARB4 (last on 06/10/19):Global, China
1. Load and unpack the firmware into the folder. If you have a global phone - use Global Rom if Chinese - use China ROM to prevent repeat brick when restoring (Miui Version CAN't Be Installed in This Device).
2. Load and replace the prog_emmc_firehose_sdm660_ddr.elf in the firmware folder.
3. The source states that you need to turn off the phone, and I say that you will translate it in EDL mode and connect to PCXiaomi Redmi Note 5 Global / Note 5 China - MIUI FirmwareThe first 5 steps
4. Select Cleanall and place the phone modified firmware.
5. After the firmware and reboot, you will have a Chinese recovery, just clatter 2 times the POWER button
Well, on the standard: unlocking the bootloader and installing the global rum :)
The source has another recovery method (QFIL / QPST), link to XDA under the spoiler
Post has been editedCRAZY41 - 17.06.19, 10:54
So ... in this topic did not find a solution. Everyone has not been stuck. But I found it on XDA, I post the translation.
Way forMiFlash .
Files to download:
Miflash 2018.
Prog Emmc Firehose Elf (Patched)SpasibkiChocoml
Firmware with ARB4 (last on 06/10/19):Global, China
1. Load and unpack the firmware into the folder. If you have a global phone - use Global Rom if Chinese - use China ROM to prevent repeat brick when restoring (Miui Version CAN't Be Installed in This Device).
2. Load and replace the prog_emmc_firehose_sdm660_ddr.elf in the firmware folder.
3. The source states that you need to turn off the phone, and I say that you will translate it in EDL mode and connect to PCXiaomi Redmi Note 5 Global / Note 5 China - MIUI FirmwareThe first 5 steps
4. Select Cleanall and place the phone modified firmware.
 |
5. After the firmware and reboot, you will have a Chinese recovery, just clatter 2 times the POWER button
Well, on the standard: unlocking the bootloader and installing the global rum :)
If the settings say that the bootloader is unlocked
Update the air to the last Chinese, then you can unlock
The source has another recovery method (QFIL / QPST), link to XDA under the spoiler
Post has been editedCRAZY41 - 17.06.19, 10:54
Crazy41 @ 06/10/19, 15:03
So ... in this topic did not find a solution.
In this thread, there are literally a lot of solutions, including the firmware for the Chinese and the global without unlock.
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement