Xiaomi Redmi Note 5 - MIUI firmware
under the messages to which you want to add links. Everyone who wants to make a backup of the most essential and Ruth still has no rights, and because of this, the Titan can not use or locked bootloader and custom rekaveri is not available, try this application, all of a sudden rescue if necessary.
https: //play.google.co...ails id = com.rlk.xcloud?
https: //play.google.co...ails id = com.rlk.xcloud?
F.A.Q.
A couple of words
Properly asked question, half have a key to the correct answer! So try to provide the most comprehensive and comprehensible information in writing the question in the subject line! First of all, indicate the full version of the firmware (which is worth what you want to put, etc.): yes2:
The code name of the model
Redmi Note 5 was codename -Whyred
Checked through fastbut, the command:
Checked through fastbut, the command:
fastboot getvar product
Anti-RollBack (ARB)
What is the ARB?
You can read about ithere .
How do I flash the latest firmware, but to stay with the old loader?
Read this - Xiaomi Redmi Note 5 Global / Note 5 China - firmware MIUI (Post flexible1126 # 76350832)
But all at your own risk!
But all at your own risk!
What threatens to downgrade the bootloader?
"Well," such a brick. : Comando:
boot modes
Recovery
- On the unit is turned off:to clampGr + and Nutrition . After the appearance of the logo, the power button can be released;
- From the "Update" application:three points - Reboot into Recovery ;
Fastboot
- On the unit is turned off:to clampGr- and Nutrition ;
- Of of a custom rekaveri (TWRP):Reboot - Loader ;
- If set to an extended restart menu: selectFastboot
Edl
- Lockeddownloader - throughtest point
- Unlockedbootloader - you can usethis program;
Unlocking and locking the bootloader
How to unlock or lock the bootloader?
To do this, there is the theme profile Unlocking XIAOMI bootloaders
How to check the status of the boot loader?
Does data reset when you unlock?
Yes, the data is reset as the program and will alert a few times!
If the Unlock the bootloader, whether coming updates?
Will. The state of the loader does not affect the OTA!
Is it possible to block the bootloader on the Chinese version of the device?
Only when the official Chinese firmware! On a global firmware can not be!
I want to unlock the bootloader, but the system says "Unlocked"
Status is checked via bootloader fastboot. If it says "locked", but others indicate the opposite (the loader status in menu development, splash, etc.), then you are Vietnamese (patched) firmware. The system will be updated, but the bootloader unlock will not work. Yield is stitching Of Chinese firmware via EDL, together with Persist section.
To learn how to do it, it is written here -Xiaomi Redmi Note 5 Global / Note 5 China - firmware MIUI (Post Dima_Apatity # 75490271)
To learn how to do it, it is written here -Xiaomi Redmi Note 5 Global / Note 5 China - firmware MIUI (Post Dima_Apatity # 75490271)
Firmware
What are the types of firmware
Firmware are divided into formal and informal (localized):
Official:
Numbering firmware:
In addition, about indexeshere .
Official:
- China - China Stable (With index " CN ") & China Developer (Beta) ;
- Global - Global stable (With index " MI ") & Global Developer (Beta) ;
- Russia - firmware with index Ru ", based Global stable ;
- Firmware, usually on the basis of Chinese, translated and with the addition of various kinds of modifications;
Numbering firmware:
- Stable - from 4 numbers example: 9.6.3.0 (where the first number indicates the version shell MIUI)
- Weekly - 3-numbers: 8.8.30 e.g. (Year - Month - Number of released EEPROM)
In addition, about indexeshere .
What iOS device will come?
Important for the Chinese version of the device.
Firmware may be different, depending probably on the "honesty" of the seller.
Official:
The so-called "Flops":
Firmware may be different, depending probably on the "honesty" of the seller.
Official:
- Chinese official firmware.
- Global official firmware, with unlocked loader, which confirms the verification through fastboot. Everything looks quite official!
The so-called "Flops":
- Global firmware, updated over the air. In the "Status of the boot loader" unlocked, locked in fact! On this firmware can not be unlocked bootloader . Way - is to sew through an EDL, the Chinese official, together with section Persist .
- Global firmware, updated over the air. In the "Status of the boot loader" blocked, blocked in fact! On such an insertion is possible to unlock the bootloader.
- Global firmware , The designation of the version which consists of 5 digits, for example: 9.5.17.0.0 . by air NOT updated, just because of these designations. "Bootloader Status" can be as in the previous "flip-flops", respectively, and the same developments.
Which firmware can be placed according to the version of the device?
on unlocked any loader without lowering the loader version.
Onblockedthere are limitations:
Chinese version - Of the Chinese firmware
Global version - Global and Chinese of-firmware
Xiaomi Redmi Note 5 Global / Note 5 China - firmware MIUI (Post Dima_Apatity # 77108147)
Onblockedthere are limitations:
Chinese version - Of the Chinese firmware
Global version - Global and Chinese of-firmware
Xiaomi Redmi Note 5 Global / Note 5 China - firmware MIUI (Post Dima_Apatity # 77108147)
Some had to upgrade, but I do not. What's wrong?
After releasing an update, it does not come to all, and selectively. This is for testing. As they are, if not found critical bugs, the firmware waits for release, placement in the pages of downloads. And then she'll be available to everyone at the PTA. Just wait. Well, or download already laid out the file and then restore themselves.
Can I upgrade the firmware with "RU" in the usual globalku three points?
No. It wants to unlock the bootloader and reflash via fastboot!
What method can be sewn with a locked bootloader?
Can:
- Built-in program "Update" (three points). Moving only within one location official firmware. Eg Stable "MI" in the Developer, and vice versa. But as a rule between the latest firmware!
- After a test point and EDL
- Through Fastboot (this is only for an unlocked bootloader)
Can I flash a localized (unofficial) firmware through the three points?
Not. All unofficial firmware sewn through TWRP.
How to activate the menu "For Developers"?
Go to Settings - About phone and tap on the "MIUI version" a few times. The partition appears in the Advanced settings.
If the Chinese version of the device firmware to flash the global, whether coming updates?
Yes, of course it will be. A version for PTA is not affected.
How to flash through firmware update? (three dots)
Download the archive with the official firmware for Recovery \ System, throw your phone or on a memory card, the application "Update" select "three points" and specify the path to the file. The transition from stable to developerskuyu (weekly) and back to the data prishodit discharge! Additional Information here - Xiaomi Redmi Note 5 Global / Note 5 China - MIUI firmware (Post INRIDI45 # 74728624)
If "Select firmware file" is not available, it is necessary to tapnut several times by the logo "10" and open the hidden items.
If "Select firmware file" is not available, it is necessary to tapnut several times by the logo "10" and open the hidden items.
What firmware have ARB3 status and which ARB4?
If you are thinking about switching to one or the other firmware, but are uncertain about which boot in it, look here -Xiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware (Dima_Apatity Post # 75920158)
Or here -http://en.miui.com/thread-2340434-1-1.html
Or here -http://en.miui.com/thread-2340434-1-1.html
How do I return to the MIUI custom firmware?
You want to eliminate possible bugs? The only completely through fastboot!
How do I upgrade to the localized firmware?
The destination must be a full wipe, but rather Format Data! To avoid any problems during the installation and use of a future firmware! Also, carefully review the instructions assembly of authors and teams!
TWRP & Root
Can I install TWRP on a locked bootloader?
No you can not!
Can I get Ruth on a locked bootloader?
No! For Ruth rules require:
Unlocking the bootloader ->install TWRP ->installation Magisk
Unlocking the bootloader ->install TWRP ->installation Magisk
How to install TWRP?
For example use autoinstaller -Xiaomi Redmi Note 5 Global / Note 5 China - firmware MIUI (Post ZerG_MOS # 75097385)
Another optionXiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware (Dima_Apatity Post # 74233186)
Another optionXiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware (Dima_Apatity Post # 74233186)
How to get the right Ruth?
Install TWRP - flash archive Magisk
Xiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware (Dima_Apatity Post # 74233186)
Xiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware (Dima_Apatity Post # 74233186)
What if TWRP constantly flies and rewritten drain rekaveri?
Android 9
Simply install the rekaveri, standard command, download it and patch your kernel, install the patch removal shirovaniya, and if need Root rights, then set Magisk.
To download rekaveri team, you need to flash the image of the dummyTo install, it is not required.
To download rekaveri team, you need to flash the image of the dummy
fastboot.exe flash antirbpass dummy.img
Android 8.1
In short, as follows:
- podgruzit tvrp
- From under it also set another image rekaveri
- Reboot of rekaveri in rekaveri
- Patch the kernel - install software patches or Magisk
Is Ruth flies when you upgrade?
Yes, it flies. Bet again.
How to update the firmware in the presence of TWRP?
Can useby this method.
"Archive damaged" error when updating the firmware
If rocked by three points and the full firmware slowed to reboot in rekaveri, the firmware started the process of "unpacking" and similar error while installing. Therefore, if and swing through three points, then after downloading, immediately transferred into TWRP for its installation. Or download the direct link from the phone \ PC.
When you update the firmware bug with Lucky Patcher
Checking for installed LP is present in TWRP from the Red Wolf. It's either clean the tails under \ data, in addition to removing Lucky. Or put another custom rekaveri.
What happens if renewed three points during a TWRP and Root?
If you update via three points, in addition to Ruth, it flies off and TWRP.
What you need to know before creating a backup
Before you create a backup, you have to remove the lock screen passwords and fingerprints. Because in the recovery, they will not work.
After recovery from backup device continually reloading in Fatsboot
After recovery requires more time to patch your kernel, please archive //savagemessiahzine.com/forum/d...ty-opt-encrypt-6.0.zip
Introduction
For the presence of regions in the firmware section is responsibleCust At the root of the entire system. Also present there (cust \ app \ customized) some pre-installed applications for a particular region. And if you set such as "India", then the customization of the application prescribed in the settings of the region.
The regions themselves are incust \ cust \**
**- the folder to a specific region.
The system is in the range of:Settings - Advanced Settings - Region
The regions themselves are incust \ cust \**
**- the folder to a specific region.
The system is in the range of:Settings - Advanced Settings - Region
I'm trying to go to the section of the region, but throws me back
So this section is empty. Accordingly, it is necessary to flash image cust.img . It is located in the archive with the firmware for fastboot. The firmware for rekaveri he is absent. Sewn on the team:
Or can be found here -Xiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware (Dima_Apatity Post # 74233186)
Because the image addition region also contains a custom software, and if you do not want, you can just install the patch with all regions -
All_Reg.zip(4.58 MB)
fastboot flash cust cust.img
Or can be found here -Xiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware (Dima_Apatity Post # 74233186)
Because the image addition region also contains a custom software, and if you do not want, you can just install the patch with all regions -
All_Reg.zip(4.58 MB)Flies region. What to do?
At first, a few words. When configuring the system, the exposed region is written to the filecust_variant along the way \ Data \ miui \ . Sometimes even the same file exists in the most cust folder, it should not be there, this is pure crutch!
If flies region, but the folders in place, you can do the following:
Or you can sewpatch According to their region
If flies region, but the folders in place, you can do the following:
- In foldercust remove cust_variant
- In folderdata \ miui open cust_variant If for example there is written cn , Then change to your!
Or you can sewpatch According to their region
I have no points Region
In localized firmware authors tend to hide this item. You can get there if the search type Region .
miscellanea
Do not operate the camera and sensors
If you do not operate the sensors and camera, then most likely the Persist jammed section, making it through Wipe TWRP.
Methods for recovery are described in the header topic, spoilerInstructions ->Sensor Recovery, EFS
Methods for recovery are described in the header topic, spoilerInstructions ->Sensor Recovery, EFS
When you install apps, Play Market writes, "is not supported on your device"
Clean Play Market data applications
How to change / flash modem?
The modem firmware to the attached!
The file is called modemNON-HLOS.bin . The firmware for rekaveri is in firmware-update . For fastbut in folder images .
Via fastboot:
The file is called modemNON-HLOS.bin . The firmware for rekaveri is in firmware-update . For fastbut in folder images .
Via fastboot:
fastboot flash modem NON-HLOS.bin
Why I do not see "Unlocking the face"?
By default, this option is available in five regions: Russia, India, Indonesia, Hong Kong, Taiwan.
Since GD 8.9.20 and GS 10.0.6.0 added Ukraine
Since GD 8.9.20 and GS 10.0.6.0 added Ukraine
How to remove the password lock screen?
Eg recovered from a backup and now does not accept the password. Remove easily can through TWRP.
The modified custom rekaveri this option is selected for installation, it is inAdditionally or Advanced - Tools
For official TWRP, as in the other, you can usepatches .
The modified custom rekaveri this option is selected for installation, it is inAdditionally or Advanced - Tools
For official TWRP, as in the other, you can usepatches .
Post has been editedDima_Apatity - 01.04.19, 18:04
Reason for editing: TWRP
Post updated
MiUIMS 8.8.30
Post has been editedKensuke - 31.08.18, 02:26
MiUIMS 8.8.30
Major changes
[New]
- Choose the region
- 6 icons into the dock bar
- several new icons
- Improved sound for Redmi Note 5
- animation and activate the melody in the components of the
- the ability to turn off notifications for the Android system
- Removed the recommendation of applications when performing actions
- Recognition of music in the katabatic application with fast display cards
- mark Rooms (application data Yellow pages need to be cleaned)
вЏі [Optimization]
- updated App Video
- Updated translations to 08/08/30
- Updated application Mi Drop
- Improved the layout and style of the date (day of the week, month, etc.)
[Correction]
- fixes known bugs
[Error]
- 7 error when installing the firmware (it is necessary to clear the section cust)
- Choose the region
- 6 icons into the dock bar
- several new icons
- Improved sound for Redmi Note 5
- animation and activate the melody in the components of the
- the ability to turn off notifications for the Android system
- Removed the recommendation of applications when performing actions
- Recognition of music in the katabatic application with fast display cards
- mark Rooms (application data Yellow pages need to be cleaned)
вЏі [Optimization]
- updated App Video
- Updated translations to 08/08/30
- Updated application Mi Drop
- Improved the layout and style of the date (day of the week, month, etc.)
[Correction]
- fixes known bugs
[Error]
- 7 error when installing the firmware (it is necessary to clear the section cust)
Screenshots
 |
 |
 |
 |
 |
Post has been editedKensuke - 31.08.18, 02:26
Reason for editing: Screenshot
Post updated
MiUIMS 8.8.30
Firmware reload!
Post has been editedKensuke - 01.09.18, 01:44
MiUIMS 8.8.30
Firmware reload!
Major changes
[New]
- Choose the region
- 6 icons into the dock bar
- several new icons
- Improved sound for Redmi Note 5
- animation and activate the melody in the components of the
- the ability to turn off notifications for the Android system
- Removed the recommendation of applications when performing actions
- Recognition of music in the katabatic application with fast display cards
- mark Rooms (application data Yellow pages need to be cleaned)
вЏі [Optimization]
- updated App Video
- Updated translations to 08/08/30
- Updated application Mi Drop
- Improved the layout and style of the date (day of the week, month, etc.)
[Correction]
- fixes known bugs
[Error]
- 7 error when installing the firmware (it is necessary to clear the section cust)
- Choose the region
- 6 icons into the dock bar
- several new icons
- Improved sound for Redmi Note 5
- animation and activate the melody in the components of the
- the ability to turn off notifications for the Android system
- Removed the recommendation of applications when performing actions
- Recognition of music in the katabatic application with fast display cards
- mark Rooms (application data Yellow pages need to be cleaned)
вЏі [Optimization]
- updated App Video
- Updated translations to 08/08/30
- Updated application Mi Drop
- Improved the layout and style of the date (day of the week, month, etc.)
[Correction]
- fixes known bugs
[Error]
- 7 error when installing the firmware (it is necessary to clear the section cust)
Post has been editedKensuke - 01.09.18, 01:44
Firmware Xiaomi Redmi Note 5
What instruction
Actually I decided to compile a list of instructions of the caps, which unfortunately no one reads, with my explanations for easier understanding. Instruction is oriented to kirpichevodov who do not know the basic terms and not reading carefully climbed wherever should not have.
My device
Redmi Note 5 Global Version Black 4/64
Bootloader unlocking
To begin, you should check your bootloader. Locked or not. Detail about this picture is writtenhere(Thank the author for instructions).
Checking the status of the loader via fastboot
1. Downloading Platform-tools (adb / fastboot) (spoiler Utilities and Applications) and unpack the archive contents into an empty folder on your PC / laptop
2. Putting your smartphone in fastboot (turn it off, hold the button and turn the volume minus vibration after release the power button and wait for the appearance of the image with the hare) mode. Connect it to your PC / laptop
3. In the folder with the files adb / fastboot holding Shift and pressing the right mouse button, select Open Command Window
4. In the window that opens, type a command console,
fastboot devices
fastboot oem device-info
• If fastboot gives Device unlocked: true - the bootloader is unlocked
• If fastboot gives Device unlocked: false - locked bootloader
1. Downloading Platform-tools (adb / fastboot) (spoiler Utilities and Applications) and unpack the archive contents into an empty folder on your PC / laptop
2. Putting your smartphone in fastboot (turn it off, hold the button and turn the volume minus vibration after release the power button and wait for the appearance of the image with the hare) mode. Connect it to your PC / laptop
3. In the folder with the files adb / fastboot holding Shift and pressing the right mouse button, select Open Command Window
4. In the window that opens, type a command console,
fastboot devices
fastboot oem device-info
• If fastboot gives Device unlocked: true - the bootloader is unlocked
• If fastboot gives Device unlocked: false - locked bootloader
At initial start-up was 9.5.19.0 firmware and boot loader has been locked. I through3 points(Thanks to the author's instructions) with a locked bootloader updated to version 8.8.16. On Version 8.8.16 ISTARTEDthe procedureUNLOCK LOADER. The link you will find all the useful information, but that you are less tinkering (like me at the time), you write how the device is unlocked.
1 Go to the settings on the phone, all the characteristics and looking "version miui" item. Tapan on it 5 times and we will open the hidden setting item "For Developers". This item is on the path: Settings-Advanced-For Developers
2 Go here and look for the item "factory unlocked" and activate it.
3 Then, looking below the item "boot status" and activate it.
To get it, you need to be tied to account XIAOMI (register). You are sure to remember the password on the account. It happens that the smartphone is bought with it and you do not have a password or a smart phone does not get rid of the previous account.
4 Then shake-to-date versionMiFlashUnlock
Install drivers for ADB / fastboot mode. They are, you must have already been installed at the validation stage boot loader state (See above.)
5 Unpack and open the program MiFlashUnlock. You agree to the terms and enter into your account Xiaomi, which I mentioned earlier.
6 Completely disable the smartphone and clamping keys Vol - and go to the Power Fastbut mode.
7 ProgramPLEASE READCautions, and if you agree, pressing unlock. 2 timer Wait for 5 seconds and begin the binding process \ unlocking device. This process will fail. If you did everything right, an error will be 99%. If completed on another amount of interest that deciphering errors and what to do will find \ askHERE(See FAQ).
If the fault occurs at 99%, it means that the timer is running in the 360/240 hours. This is the time for which you need to think about all you need it or not. About the reduction of waiting times readhereI personally have not used this life hacking and waited for all the required 360 hours.
8 At the end of the counter is reset (I have in the meantime been updated to 8.8.16 to 8.8.23, and then from 08/08/23 to 08/08/30 by"Three dots") You go back into the program MiFlashUnlock and repeat what I have described above (paragraph 5-7).
You now have a process reaches 100%. Your entire infa deleted. Also, the manipulation carried out with a fully charged smartphone.
Smartphone will reboot itself and the system starts to boot. Then check the status of the loader (made above). If the boot loader is unlocked, then proceed to the next step.
Install TWRP
To get Root, put a custom or localized supply MIUI, we need to install TWRP.
Personally, I put onof this instruction Many thanks to the author !! Thank him necessarily. I set myself TWRP Red Wolf (but it is at their discretion).
Personally, I put onof this instruction Many thanks to the author !! Thank him necessarily. I set myself TWRP Red Wolf (but it is at their discretion).
Installing custom firmware
I describe a way to install firmware and return to localizers. I write what I have personally tested and chewed. On this and cast.
I put and AEX 9.0 and MCAOSP. But because of the lack of gesture control, he returned to MIUI from MS.
Established custom ofThisinstructions (section 5.1)
I did exactly as described therein. Many thanks to the author. Thank him!
I put and AEX 9.0 and MCAOSP. But because of the lack of gesture control, he returned to MIUI from MS.
Established custom ofThisinstructions (section 5.1)
I did exactly as described therein. Many thanks to the author. Thank him!
Return to the MIUI 10 of localizers
In general poyuzat custom, I realized how much hooked on "gesture control" and hard to be without him. I decided to return to miui by localizers.
The choice fell on MIUI MS from "sun boy." Because liked the description of which was the point of that in his assembly off encryption. Because of the fear of getting a brick, I tried as much as possible less affect sections, especially their format. By this, I downloaded an invalid link assembly 8.8.30 and removed in the archive everything related to the ARB.It is for this INSTRUCTIONS !!! MAKE SURE !!!! Many thanks to the author! Thank him must!
Further, all makeaccording to this instruction! ITEM 7.2
Only LazyFlasher 6.0 I DO NOT flash, because the assembly MIUI MS is not encrypted profile data.
When you boot the system will reboot itself 2-3 times and start loading system (with animation).
The choice fell on MIUI MS from "sun boy." Because liked the description of which was the point of that in his assembly off encryption. Because of the fear of getting a brick, I tried as much as possible less affect sections, especially their format. By this, I downloaded an invalid link assembly 8.8.30 and removed in the archive everything related to the ARB.It is for this INSTRUCTIONS !!! MAKE SURE !!!! Many thanks to the author! Thank him must!
Further, all makeaccording to this instruction! ITEM 7.2
Only LazyFlasher 6.0 I DO NOT flash, because the assembly MIUI MS is not encrypted profile data.
When you boot the system will reboot itself 2-3 times and start loading system (with animation).
PS
Instructions will be replenished over time will correct grammatical mistakes and to supplement it. I ask not strictly true))) This is just my experience of installing and unlocking.
The author of the hand curves and shyness (need to ask questions on all your doubts) can not be held responsible!
The author of the hand curves and shyness (need to ask questions on all your doubts) can not be held responsible!
Post has been editedtselikov.oleg - 04.09.18, 21:39
MiFlash IN RUSSIAN LANGUAGE
by bullik01 (c)
Fully translated
(updated post)
by bullik01 (c)
Fully translated
(updated post)
Description
The program for firmware Xiaomi devices translated into Russian by me (bullik01)
Changes
- Translated all found resources
- Cut Chinese resources
- Translated update (MiFlash update tool)
- Translated various statuses (if found not translated - write in the LAN with a screenshot)
- Translated driver installation window
Screenshots
 |
 |
Russian MiFlash 2018.05.28
Download:
MiFlash2018-5-28-0_RUS_by_bullik01.zip (49.34 MB) (translated 01/09/2018)
Thank you for more than 53.0 thousand downloads!
Post has been editedbullik01 - 03.07.20, 18:13
TWRP red fashion
To install you need to unlock the bootloader.
Features
Version number 1: TWRP based PitchBlack-whyred-2.9.0-20190713 ; Magisk version 20.2 (20105) Canary, Magisk Manager version 7.4.1 (257) , Titanium Backup version 8.3.3 Pro . Making the interface, minor improvements and tools - my.
TWRP-331-PB_bordo9.img(37.42 MB)The same rekaveri to automatically install
AutoInstall_TWRP_whyred_331-PB_bordo.zip(36.9 MB)Version number 2: TWRP based PitchBlack-whyred-2.9.0-20190713 ; Magisk version 20.2 (20109) Canary, Magisk Manager version 7.4.1 (262) , Titanium Backup version 8.3.3 Pro . Making the interface, minor improvements and tools - my.
TWRP-331-PB_bordo11.img(37.43 MB)The same rekaveri to automatically install
AutoInstall_TWRP_whyred_331-PB_bordo.zip(36.91 MB)Several screenshots
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Rules of installation and use
1. Unpack the archive avtoinstaller on the C drive of the computer. Phone to transfer modefastbootand connect to a computer. Starttwrp-autoinstaller.batand follow the instructions on the screen.
2. After the automatic installation, the phone itself is loaded into TWRP. To rekaveri later flew not on stock, you must immediately do the following:
- after being loaded into TWRP remove encryption (Advanced ->Remove encryption).
- or set Magisk, if necessary Ruth (Optional ->Set Magisk).
3. If the claim 2 did not help, it follows from the very TWRP again to flash an image (img) TWRP Recovery to the partition.
4. Modem (NON-HLOS.bin ) Can be taken from any firmware and sew straight from TWRP, renaming the file extension img . Sew in the section Firmware.
5. If desired, change the wallpaper that is displayed in the first seconds after the phone (Splash ), Sewing section Splash.
6. It is possible to directly from the menu "Tools" to installCamera2Api (Support for Google-camera) and fonts Google sans .
7. It is also easily and quickly stitched imagesCust (Responsible for the regions) Persist ( img these sections can be taken from any official firmware).
pay attention: different versions rekaveri retain backups in different locations (folders) and often do not see a copy of the sections to one another. therefore, restore the same rekaveri, which makes a copy.
Post has been editedshurkesha - 18.12.19, 21:26
Within a month about reset and "feel" as the stock firmware Develop 10 miui, masik, miupro, miRoom all set with ful wipe and format data across the EU.
Today freewheeling 9.6.4.0 stabilku and just a different feeling. Not a single frieze, all smoothly, clearly. One can see the Chinese well-polished 9 meow.
And sleeps well and does not thresh percent.
Still, the stock has a drain. Podzhiraet battery for longer Masik, but on par with MiRum and Miupro prozherlivy began, though something in it was freezing.
Custom bikes have not tried, but probably Aex Of downloaded'll see that there is a super endurance. To me it is now important without wifi.
And in fact all firmware + - hours, a maximum of two and is highly dependent on the network, brightness and used programs.
The most stable of all the same to me seemed localized Masik further MiRum and then have it all 10 Miupro meow.
Making 10 meow I went down and I'll be back on Masik, though, and be sure to sit at 9 a few days.
Well, about Aex not forget you need to, though I can not stand naked android, but if you suddenly pull hour 12 screen (with a maximum of 9 hours that could Masik) with heavy use ONLY 3 Ms and always Auto-Brightness and synchronization, can and try to get used to .
On average, all hold 7-8 hours of intensive use. For myself, concluded for greater autonomy does not make sense to jump from the firmware to the firmware within the MIUI, only because of what that buns and beautiful if only.
Vacation is over, intensive use is now so often is not a means Masik and 10 meow, Masik waiting less than all I eat battery.
Today freewheeling 9.6.4.0 stabilku and just a different feeling. Not a single frieze, all smoothly, clearly. One can see the Chinese well-polished 9 meow.
And sleeps well and does not thresh percent.
Still, the stock has a drain. Podzhiraet battery for longer Masik, but on par with MiRum and Miupro prozherlivy began, though something in it was freezing.
Custom bikes have not tried, but probably Aex Of downloaded'll see that there is a super endurance. To me it is now important without wifi.
And in fact all firmware + - hours, a maximum of two and is highly dependent on the network, brightness and used programs.
The most stable of all the same to me seemed localized Masik further MiRum and then have it all 10 Miupro meow.
Making 10 meow I went down and I'll be back on Masik, though, and be sure to sit at 9 a few days.
Well, about Aex not forget you need to, though I can not stand naked android, but if you suddenly pull hour 12 screen (with a maximum of 9 hours that could Masik) with heavy use ONLY 3 Ms and always Auto-Brightness and synchronization, can and try to get used to .
On average, all hold 7-8 hours of intensive use. For myself, concluded for greater autonomy does not make sense to jump from the firmware to the firmware within the MIUI, only because of what that buns and beautiful if only.
Vacation is over, intensive use is now so often is not a means Masik and 10 meow, Masik waiting less than all I eat battery.
Only that person got the body and unlock immediately. Unsubscribed. His actions:
Phone came with firmware 9.5.13.0 Global, arb3.
Synchronization and search devaysa cut off immediately.
1. Tied your ACC, through tied the developer.
2. Through E flash unlock (miflash_unlock_ru_3.3.525.23) tried this version - 720 hours.
3. untethered from E in a smart Acca.
4. tied to another smart miakku
5. Went miflesh through the second account and connected smart
6. It worked, the phone unlocked.
Phone came with firmware 9.5.13.0 Global, arb3.
Synchronization and search devaysa cut off immediately.
1. Tied your ACC, through tied the developer.
2. Through E flash unlock (miflash_unlock_ru_3.3.525.23) tried this version - 720 hours.
3. untethered from E in a smart Acca.
4. tied to another smart miakku
5. Went miflesh through the second account and connected smart
6. It worked, the phone unlocked.
A few words about the assemblies of mirum. sitting on 8.8.9, bombicheskaya firmware, everything flies, the battery normally keeps magistik and all that plowing.
New thing came out 8.8.30.
I think, are reset, MB will be even better.
Established from scratch (wipe date, etc. through caches tvrp).
When you first boot the slave table, after the initial setup, bug flew GP services and the heat went.
The keyboard opens sekudn 10, the camera runs 15 seconds, etc ..
I did reset, reboot. Did not help.
In short rolled to 8.8.9, everything is fine.
Tolley assembly curve felts crooked something fell.
Maybe someone will be useful in my experience. Peace for everyone!
New thing came out 8.8.30.
I think, are reset, MB will be even better.
Established from scratch (wipe date, etc. through caches tvrp).
When you first boot the slave table, after the initial setup, bug flew GP services and the heat went.
The keyboard opens sekudn 10, the camera runs 15 seconds, etc ..
I did reset, reboot. Did not help.
In short rolled to 8.8.9, everything is fine.
Tolley assembly curve felts crooked something fell.
Maybe someone will be useful in my experience. Peace for everyone!
LOka32432 @ 04.09.18, 10:30
the problem is clearly in miui
Configure notifications miui 10 for examplesavagemessiahzine.com(similar for other applications)
Settings in the software application
 |
Settings - Applications
 |
 |
Settings - Resolution - autostart
 |
Settings - Battery - background application mode
 |
 |
Curtain in the status bar
 |
 |
Castle on the application (optional)
 |
Total
 |
Post has been editedurcik - 04.09.18, 17:05
Reason for editing: Add screenshots curtain
Features (original with XDA)
* Supports Treble and non-Treble ROMs
* Up-to-date Oreo kernel, built from sources
* Increased compatibility with TWRP
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* Built-in support for installing SuperSU (v2.82-201705271822 - non-Treble ROMs only)
* AromaFM
* Password
* Support for Miui and Custom ROMs
* Better language support
* Optimized versions of community scripts
* Fox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more!
* Up-to-date Oreo kernel, built from sources
* Increased compatibility with TWRP
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* Built-in support for installing SuperSU (v2.82-201705271822 - non-Treble ROMs only)
* AromaFM
* Password
* Support for Miui and Custom ROMs
* Better language support
* Optimized versions of community scripts
* Fox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more!
R8.0 ChangeLog
* OrangeFox now supports the backing up of internal storage.
* Improvements in MIUI OTA functionality.
* Improvement in Treble support.
* Updated sources with lastest TWRP.
* Updated Magisk to 17.1
* Support Pie decryption (in Pie ROMs that support encryption).
* Fixed random crashes after some zip installs.
* Some minor bug fixes.
* Fixed graphic bugs in quick settings on 18: 9 screens.
* Minor UI changes.
* Fixed bug with inscriptions in Chinese, Japanese and Korean not appearing on some buttons.
* Increases in devices officially supported.
* And more ...
* Improvements in MIUI OTA functionality.
* Improvement in Treble support.
* Updated sources with lastest TWRP.
* Updated Magisk to 17.1
* Support Pie decryption (in Pie ROMs that support encryption).
* Fixed random crashes after some zip installs.
* Some minor bug fixes.
* Fixed graphic bugs in quick settings on 18: 9 screens.
* Minor UI changes.
* Fixed bug with inscriptions in Chinese, Japanese and Korean not appearing on some buttons.
* Increases in devices officially supported.
* And more ...
Screenshots
 |
 |
 |
Original screenshots from XDA
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Installation: Download the file, boot into TVRP, flash archive. At the end of the unit itself will reboot into the new rekaveri.
PS You can also use the option to install the script, or sew the way through the available rekaveri - simply remove it (image) from the archive and act on instructions favorite.
NB! Under this option, the installation will not be set more "bun" Fox, such as: Magisk, Superpower, api2 camera and stuff like that.
Download:
OrangeFox-R8.0-whyred.zip(45.09 MB)Instructions OTA Updates rekaveri
XDA thread
Post has been editedVolkoffstein - 25.09.18, 23:27
Reason for editing: In the header
Sander_sib, You are absolutely right.
Firmware
MIUI | 9.6.3.0 | 9 | 8.1 | MiFlash / fastboot
instruction
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement