My path to the root.
All actions you do at your own risk!
The author is not responsible for your actions!
Attention! After KNOX data manipulation will be 0x1.
Instructions relevant for A307FNXXU2BTD1 firmware for Android 10
Introduction:
After several unsuccessful attempts to obtain rights of Ruth, decided to share their experiences. According to the instructions in the header went in butlup (probably something that is not understood). on firmware
A307FNXXU2ASL1(The latter as of 10.01.2020), after falling off rutirovanie apparently modem, as after loading ceases to see the sim card or periodically fall off. By this I decided to decrease the firmware to
A307FNXXS2ASK5(Below will not work if the boot loader has been updated to the latest version (the fifth digit from the end of the firmware designation)). With the introduction of all, well, at this point in more detail.
Training: Download and unpack,
match your, Firmware, you can site
https://sfirmware.com/(Fast and free of charge, be sure to select a region)
archiver
7z open the file
AP_A307FN ... and take out of his file
boot.img.lz4. Throws the downloaded file
boot.img.lz4 in the smart phone, set the
MagiskManager and
Zarchchiver By ZArchiver unpack
boot.img.lz4 (You should get
boot.img ).
Next, open MagiskManager click on the first button
"Installation"Further in the window again
"Installation", Further
"Patch image manually", Then choose our resulting file
boot.img and forward reports of the process is completed. Patched file will be stored in the phone memory folder
"Download"under the name
"Magisk_patched.img" Copy the downloaded file
"Magisk_patched.img" to rename a computer (
!important! ) at
boot.img and with the help
7z we archive format
.tar (No compression and other parameters)
At this training is over go to the very rutirovaniyu.
The process itself: 1. Since during rutirovanie
You need a full resetsave the data to internal memory.
1.1. Just can immediately flash on predlagayumoyu me firmware A307FNXXS2ASK5. The firmware file must be selected
CSC (!important!) (HOME_CSC file is used only when the firmware while preserving user data and we do not need)
2. The apparatus itself must be unlocked with the loader. How to do this has already been described.
(! Unlock requires a reset!)3. Turning off the unit, while holding the buttons "Volume up" and "Volume down" connected to the computer, and after the appearance of the window with a choice of modes let go of the button. Next, briefly click the button "Volume up" and we find ourselves in ODIN mode.
4. kompuktere program ODIN select previously prepared file
boot.tarin line
Ap. In the tab "Options" remove the tick in the "Auto Reboot"
(!!important!!) and click "Start". We are waiting for the end of the process, takes just 5-10 seconds.
5. Field firmware pull out the end of the cable, hold the button "Volume down" and "Power" to restart,
as soon as the screen fades out we press the "Volume up" and "Power" that would get into rekaveri. We do a factory data reset (!important!).After resetting the menu rekaveri are aiming to restart and click,
once the screen goes off stifle the "Volume up" and "Power"BEFORE Samsung logo appearance(Literally 1-2 seconds)
(!!!important!!!) . Hold - get in rekaveri, repeat step.
Smartphone will reboot a couple of times and turns.
6. Run a smartphone MagiskManager install and run it, a window pops up with the property setting finish, agree, Smart reboot after installation and that's it.
The method is not new, and is universal for line A
Post has been editedsnekt - 21.05.20, 12:15Reason for editing: clarification