Changes in v5.0.1:
►1. Turn on unrestricted access to the internal memory of the jailbreak applications for backward compatibility with sandbox while preserving security by leaving the security restrictions enabled for the system and user applications.
►2. Update covers Phone Rebel models and kits.
Changes in v5.0.0:
►1. Full support for all devices on iOS 11.0-13.5 with Cydia.
Changes in v4.3.1:
►1. Update to version 4.3.1 because of a bug in github, because of which the old file was temporarily available.
Changes in v4.3.0:
►1. Added support for user-space reboot the first time you jailbreak.
►2. Added support for injection into all the user space.
►3. Added support searching and registration services from the sandbox with the prefix cy: for developers.
►4. Restart user space after jailbreak.
►5. Made major changes in the design to keep the system performance.
►6. Fixed the random reboots, hangs, memory problems, and any known issues that affect the system services or applications.
►7. Fixed a constant blocker software update to iOS 13 (all able to jailbreak).
►8. Fixed design issues that affect the recovery tool
Succession.
►9. Automatic, reclosing software updates when restoring RootFS.
Changes in v4.2.1:
►1. Fixed a bug that caused unreliability startup substitute.
►2. Fixed the problem that violate the battery settings and cause additional discharge.
Changes in v4.2.0:
►1. The problem with system services at A12-A13 (i.e. iMessage notification).
►2. Added support for iOS 13.0-13.3 A8-A11 devices.
►3. Fixed a temporary freeze after the jailbreak.
► 4.
important notes.
Changes in v4.1.1:
►1. Fixed a stability bug in time_waste exploit for iOS 13.0-13.3.
►2. Fixed random restart in v4.1.0, both during jailbreaking, and after it.
Changes in v4.1.0:
►1. Replace exploit oob_timestamp by
@_bazadto exploit time_waste by
@jakeashackswith 99% success in step 1 with iOS 13.0-13.3.
►2. Fixed compatibility issues with iOS 11.0-12.4 and 13.0-13.2.3.
Changes in v4.0.3:
►1. Fully Fixed App Store on A12-A13.
►2. Fixed a bug that affected the system services on the A12-A13.
►3. Increased reliability exploit, directing the user to the correct use.
Changes in v4.0.2:
►1. Fixed iOS 13.0-13.2.3 support.
►2. Fixed Substitute with WebContent.
Changes in v4.0.1:
►1. Fixed the App Store for the A12-A13.
►2. Fixed push-notifications for the A12-A13.
►3. Increased reliability for the A12-A13 devices iOS 13.0-13.3.
Changes in v4.0.0:
►1. Full support for A12-A13 devices on iOS 13.0-13.3 with Cydia.
Changes in v3.8.0 ~ b1:
►1. Added support for iOS 12.4.1 iPhone A12 (currently iPad is not supported).
Changes in v3.7.0 ~ b4-1:
►1. Update Cydia set for the network access request on Chinese devices.
►2. Rename complete mobilesubstrate, to match other jailbreak.
►3. Upgrade to substitute 0.1.0.
Changes in v3.7.0 ~ b3
►1. Fixed a reboot system daemons using Substrate (A7-A11).
Changes in v3.7.0 ~ b2:
►1. Fixed cameras on devices A12-A12X.
►2. Fixed GPS devices work on the A12-A12X.
►3. Fixed a problem with shopping in the App Store on devices A12-A12X.
►4. Fixed Face ID on the devices A12-A12X.
►5. Fixed performance issues on devices A12-A12X.
►6. Fixed stability problems on devices A12-A12X.
►7. The problem with restarting the system daemons on devices A12-A12X.
►8. Fixed general stability issues of system services on the devices A12-A12X.
►9. Fixed a shutdown of the system on the devices A12-A12X.
►10. Fixed a reboot of the system on the devices A12-A12X.
►11. Fixed USB devices work on the A12-A12X.
►12. Fixed a bug in the Xcode debugging devices A12-A12X.
►13. Fixed bug in libsubstitute, which resulted in damage to TetherMe tweak on devices A12-A12X.
►14. Fixed an issue with memory management on devices A12-A12X.
►15. Fixed tweak injection (Substitute) on devices with MobileSafari A12-A12X.
►16. On a full bypass AMFI / CoreTrust on devices A12-A12X.
►17. Reloading system daemons via launchctl instead ldrestart.
►18. Reloading system daemons before restarting SpringBoard.
Changes in v3.7.0 ~ b1:
►1. Full support for A12-A12X with Cydia and system-wide tweak injection (Substitute).
Changes v3.6.3:
►1. The problem with finding offsets kernels on A8 has been fixed.
Changes v3.6.2:
►1. The problem with API access to the kernel virtual memory on A7-A8 devices that made jailbreaking useless due to a failure to copy large kernel data (an error known as: "Unable to copy container profile in kernel memory.") Is fixed
Changes v3.6.1:
►1. Improved Automatically Select Exploit.
Changes v3.6.0:
►1. Completely redesigned and rewritten all the patches for jailbreaking from scratch.
►2. Patches for jailbreaking are static, not dynamic - this means that the stability of the system will be fully restored after the jailbreak.
►3. Fixed application crash on startup when it is signed by profiles with non-ASCII characters.
►4. Internal preparation of jailbreak patches for full support for A12-A12X.
►5. Jailbreak is much more reliable and faster in operation.
►6. Added SockPort 3.0 exploit to increase reliability on iOS 12.4 and devices with low RAM.
►7. Fixed SSH support for arm64e devices running iOS 12.0-12.1.2.
►8. Jailbreak is possible with damaged SystemVersion.plist on iOS 12.4.
►9. The jailbreak performs proper cleaning to maintain system stability in the event of a failure.
►10. Fixed jbctl command line utility.
►11. The transition to a new technique to configure system boot nonce generator, which works on all arm64e devices running iOS 12.0-12.4 (thanks
@ 0x7fffor the idea).
►12. Fixed a bug due to which the initial installation of Cydia sometimes freezed.
►13. Significantly accelerated the initial installation process of Cydia.
►14. Internal preparation of upcoming substitute support.
►15. Internal training of Cydia and its resources for full support for arm64e.
Changes v3.5.6:
►1. Added support for mounting RootFS in read-write mode on A12-A12X devices running iOS 12.1.3-12.4.
►2. Added support for RootFS recovery on A12-A12X devices running iOS 12.1.3-12.4.
Changes v3.5.5:
►1. Fixed problems with the jailbreak presented in the latest update.
►2. Fixed support for iOS 11.
Changes v3.5.4:
►1. Added full support for SSH with root-shell for A12-A12X devices on iOS 12.1.3-12.4.
►2. Added support for arbitrary execution of unsigned code on A12-A12 devices with iOS 12.1.3-12.4 (Note: object files must be signed using the CMS blob using the codesign utility).
►3. Added support for launching expired or withdrawn applications on A12-A12X devices on iOS 12.1.3-12.4.
►4. Fixed instant or random reboots after jailbreaking using the SockPuppet3.0 exploit on A7-A12X devices on iOS 11.0-12.4.
Changes v3.5.3:
►1. Added partial WIP support for A12-A12X devices on iOS 12.1.3, 12.1.4, 12.2 and 12.4 with support for installing HSP # 4 as TFP0, setting kernel_task info, exporting kernel_task port, dumping APTicket, logging KASLR shift and ECID and disabling auto updates.
-> пїЅHas been withdrawn, contains errors.
Changes v3.5.2:
►1. Fixed exploit of SockPuppet 3.0 on iPad Mini 4 and iPad Air 2.
Changes v3.5.1:
►1. Added updated exploit SockPuppet 3.0 from
@umanghere►2. Removed exploits SockPort and SockPort2.
►3. Updated system-memory-reset to fix random reboots.
►4. Added thanks to Apple.
►5. The error was fixed in stage 2 when jailbreaking after updating from a lower firmware while saving application data.
►6. Fixed crash of the application on iOS 11.
Changes v3.5.0:
►1. Added support for iOS 12.4 in the exploits of Sock Puppet (A8-A11) and Sock Port (A7-A7X).
Changes v3.4.2:
►1. Fixed a bug due to which the SockPuppet kernel exploit was not displayed on the A8-A8X devices.
Changes v3.4.1:
►1. Fixed a sandbox exchange error when using non-SockPuppet exploits.
►2. Added SockPort 1.5 exploit from
@jakeajamesfor A7-A9X devices (reliability: ~ 95% of comprehensive testing).
►3. Disabled the SockPuppet exploit on the A7-A7X due to reliability issues.
►4. Added support for iOS 12.3 ~ b1 for jailbreaking (tested on iPhone 5s).
►5. Fixed theoretical reliability bug with SockPuppet.
Changes v3.4.0:
►1. The SockPort 2.0 exploit has been replaced by the SockPuppet 2.0 exploit with greater reliability and stability on older devices.
Changes v3.3.8:
►1. Use rewritten SockPort 2.0 with ~ 100% reliability, execution time ~ 100 milliseconds and support for all devices on iOS 11.0-12.2 (exception A12-A12X at 12.1.3-12.2).
►2. Fixed jailbreak on iOS 12.2 for iPhone and iPod.
Changes v3.3.7:
►1. Increased reliability of the Sock Port kernel exploit on 4K devices.
Changes v3.3.6:
►1. Fixed Sock Port crash on 4K devices.
Changes v3.3.5:
►1. Fixed a reliability bug in the Sock Port.
►2. Fixed Sock Puppet on A8X.
Changes v3.3.4:
►1. Added exploit
Sock portfrom
@jakeashacksfor the A7-A9X with iOS 11.0-12.1.4.
Changes v3.3.3:
►1. Fixed Sock Puppet kernel exploit on iOS 11.
►2. Fixed the compatibility state of the Voucher Swap exploit with iPad Air 2 and iPad Mini 4 on iOS 11.
Changes v3.3.2:
►1. Fixed bug when searching for offsets kernel on iOS 11.
Changes v3.3.1:
►1. Increased jailbreak speed for a few seconds.
►2. Fixed a bug in the dark mode on the iPad.
Changes v3.3.0:
►1. Full iOS support
12.1.3 - 12.2for A9-A11.
►2. Various improvements, fixes, improvements.
Changes v3.2.1:
►1. Fixed several typos in the application.
►2. Updated uikittools.
►3. Ignore the badge update cache failures, unless they are fatal.
Changes v3.2.0:
►1. New user interface (
@HiMyNameIsUbik).
►2. Added dark mode for user interface.
►3. Added information buttons for options.
►4. Improved jailbreak reliability with the help of machswap and machswap2 exploits.
►5. Updated jailbreak resources to fix the CS_DEBUGGED option.
Changes v3.1.3:
►1. Fixed a bug in the status update.
►2. Fixed a logical error when remounting the root file system (
reddit.com/r/jailbreak/).
►3. Made it so that machswap and machswap2 are not dependent on the theft of the kernel credentials in order to eliminate a possible reliability problem.
►4. Upgrading kernel patches to use a more secure allocation method.
►5. Fixed missing information in the jailbreak completion notification.
►6. Fixed false information in the jailbreak completion notification.
Changes v3.1.2:
►1. Fixed a bug in the user interface settings on small devices.
►2. Added option to hide HUD progress.
Changes v3.1.1:
►1. Fixed recovery of the root file system when the system is not in a jailbreak state on iOS 11.
►2. Added option to automatically restart SpringBoard after jailbreak completion, instead of waiting for the user to press the OK button.
Changes v3.1.0:
►1. The kernel patch has been rewritten from scratch to improve the stability and reliability of the jailbreak.
►2. The preference management system was rewritten from scratch to optimize the jailbreak.
►3. From scratch rewritten diagnostic system to provide more useful information.
►4. The unrestrict library is rewritten from scratch to improve the stability of the system after jailbreaking.
►5. Added support for switching from other iOS 12 jailbreaks without restoring the root file system and data loss.
►6. Made Unrestrict and added sandbox exceptions for mach_lookup and mach_register.
►7. Fixed issues with processes looking for the Substrate port in iOS 12 to fix stability and performance issues.
►8. Fixed support for broken versions of RocketBootstrap and tweaks with hid support.
►9. Fixed iMessage crash when sending a voice message.
►10. Fixed disappearance of FaceTime calls on some devices.
►11. Fixed camera crash on some devices.
►12. Update the local APT repository to include the latest updates from the Elucubratus repository, including updated uikittools with rewritten uicache and sbreload commands to update the icon cache and reboot SpringBoard much faster when installing packages from Cydia.
►13. Updating the icon cache during the restoration of the root file system to fix the jailbreak of the application remaining on the home screen after restoring the root file system.
►14. Updated mobilesubstrate to version 0.9.7033 to disable the bootloader in the securityd daemon to fix the hang issue on iOS 12.
►15. Significantly improved jailbreak reliability when using machswap or machswap2.
►16. Wait until the user clicks OK in the jailbreak completion message before respringing.
►17. Improved self-repair jailbreak.
►18. Added HUD progress to display jailbreak process status.
►19. Optimized code.
►20. Improved approval.
►21. Added specific error messages.
►22. Display device information at startup.
►23. Cleared logging.
►24. Reconfigured settings "Reload System Daemons" and "Enable get-task-allow".
►25. The option "Enable get-task-allow" is active by default.
Changes v3.0.1:
►1. An iteration of the proc list has been performed with the appropriate data locks in Unrestrict to correct a possible race condition in the kernel (Important stability fix).
►2. Fixed a typo in the application.
►3. Fixed a bug in logging.
►4. Added a reset button for iOS 12.1.3 - 12.2.
-> пїЅDangerous to the device.
Changes v3.0.0:
►1. Full support for iOS 11.0 - 11.4.1.
►2. Full iOS support
12.0 - 12.1.2for the A7-A11.
►3. Numerous improvements, fixes, improvements.
Changes v2.2.6:
►1. Fixed bug in extracting bootstrap / install Cydia.
Changes v2.2.5:
►1. Included diagnostic log file.
Changes v2.2.3:
►1. Fixed bug with unpacking rsync.
Changes v2.2.2:
►1. Fully fixed bug when installing Cydia / unpacking bootstrap.
Changes v2.2.1:
►1. Fixed bug when installing Cydia / unpacking bootstrap.
Changes v2.2.0:
►1. Install Cydia Substrate, if not already installed.
►2. Check the Cydia Substrate files and reinstall them if the check fails.
►3. Fixed bug when switching from Electra without restoring the file system (RootFS).
►4. Clean up kernel data structure fixes for improved performance and security.
►5. Removed Substitute support files in the file system.
►6. Removed Substitute support links in the file system.
►7. Remove Electra's Cydia Upgrade Helper, if present.
►8. Improved preference management.
►9. Transition to a more efficient version control system.
►10. A new implementation of libarchive is used to decompress bootstrap for increased performance.
►11. Updated rsync to improve performance and stability of file system recovery (RootFS).
►12. Improved memory management.
►13. Re-unpacking bootstrap if it was unpacked on another version of iOS.
►14. Thanks to Saurik for Cydia and Substrate.
►15. Avoid writing to disk when it is not needed.
►16. Added a detailed log window for jailbreaking.
►17. Exploits a little faster.
►18. Jailbreak is much faster and more efficient.
►19. The jailbreak itself now takes a little less than a second (the exploit is not included).
►20. Fixed a bug in the search for patches, which led to a crash exit from the sandbox on some devices.
►21. Fixed theoretical errors.
►22. Improved approval.
►23. Improvements in performance.
►24. Fixed theoretical errors.
►25. Improved statement to make it more secure.
►26. Fixed a bug in the log.
►27. Updated bootstrap.
►28. Enabled file overwriting in bootstrap unpacking.
►29. Improvements in performance.
►30. Experimental changes have been made to the empty_list (vfs) exploit to improve its reliability (thanks to @ GeoSn0w for the hint).
►31. Fixed migration from Electra without restoring the file system (RootFS).
►32. Disabled experimental changes to the empty_list (vfs) exploit.
►33. Fixed some error descriptions.
►34. Fixed file system recovery (RootFS) on certain devices.
►35. Added a switch to hide the log window.
►36. The size of the application has been reduced from 81 MB to 25 MB by optimizing resources.
►37. Added a switch to reset the Cydia cache on demand.
►38. Cydia installation rewritten.
►39. Installed local repository.
►40. Removed bootstrap.
►41. The local APT repository from Cydia is hidden.
►42. Fixed theoretical errors.
Changes v2.1.4:
►1. Reduced application size from 63 MB to 22 MB by optimizing resources.
Changes v2.1.3:
►1. Fixed a bug in the search for patches, which affected the search for tricks in certain versions of iOS.
►2. Switch to a better version control system.
►3. Added the ability to downgrade version v2.2.0 (not yet released).
►4. Release v2.1.2 was not.
Changes v2.1.1:
►1. Jailbreak has become faster.
►2. Missing hosts file is not an error.
►3. Ignoring dependencies when reinstalling Cydia.
►4. Fixed false positives.
►5. Clearing user data Cydia when restoring a file system (RootFS).
►6. Fixed confusion with the names of images during file system recovery (RootFS).
►7. Fixed another error when restoring the file system (RootFS).
►8. Improved memory management.
►9. Fewer external binaries are used.
►10. Complete cleaning of Cydia user data when restoring a file system (RootFS).
►11. The kernel base is stored in kernel_task ->all_image_info_addr
►12. The kernel slide is stored in kernel_task ->all_image_info_size
►13. Fixed address assertion.
►14. Fixed instant mount file system snapshot.
►15. Improved approval.
►16. Optimized code.
►17. Fixed DEB installation error.
►18. Fixed reinstalling Cydia.
►19. Fixed installing / reinstalling OpenSSH.
►20. Improved error messages.
►21. Optimized jailbreak.
►22. Fixed other trivial errors.
►23. Optimized jailbreak process.
►24. Fixed a bug in the settings that updated the icon cache when installing / reinstalling OpenSSH instead of doing it when reinstalling Cydia.
►25. Optimized settings code to improve jailbreak efficiency.
Changes v2.1.0:
►1. Introduced internal changes to simplify troubleshooting.
►2. Added T-Mobile support for blocking certificate revocation.
►3. Re-jailbreak without rebooting (you need to restart the device when updating jailbreak).
►4. It became possible to switch from Electra without restoring the file system (RootFS) (you need to complete the pending updates in Cydia after switching from Electra to complete it).
►5. Updated built-in resources.
►6. Fixed bug when extracting bootstrap.
►7. Exiting the application only if the error is fatal.
►8. Fixed bug when loading daemons.
►9. The jailbreak process is faster and more stable.
►10. Added wishes to the user interface.
►11. Other fixes and improvements.
►12. Fixed bug when extracting bootstrap, which was presented in the previous assembly (beta 1).
►13. Fixed a bug in installing Cydia, which was presented in the previous build (beta 1).
►14. Fixed a bug when switching from Electra without restoring the file system (RootFS).
►15. Updated “No Tweaks” mode to support the new “Disable Loader” option in Cydia Substrate.
►16. Added the ability to completely disable jailbreakd when installing Cydia Substrate through a future update of Cydia.
►17. Added internal support to completely disable jailbreakd with updating resources.
►18. A special exploit error warning has been made to make it more understandable.
►19. Automatic reboot when the user clicks “OK” when an exploit fails.
►20. Improved version checking.
►21. Fixed a strange bug in the system that did not allow Cydia Substrate to download tweaks, although this error was not caused by the tool.
►22. The unc0ver interface supports different sizes and font styles (for example, bold text).
►23. Added initial localization support (not yet included).
►24. Reduced the number of stages.
►25. Fixed bug when installing OpenSSH.
►26. Transfer to Sam Bingner's new trust cache injector, thereby providing support for double-hash signatures.
►27. The hosts file is not updated unnecessarily.
►28. Unlocked Saurik repository.
►29. Reduced the number of stages.
►30. Removed unnecessary checks.
►31. Avoid applying unnecessary kernel patches if they are not required.
►32. Before use, make sure that the system snapshot has been correctly mounted.
►33. Unmount the system snapshot after crawling or restoring the root file system snapshot.
►34. Simplified viewing of thanks (authors).
►35. Removed unnecessary logging.
►36. Improved exploit success rate empty_list (vfs).
►37. Fixed runCommand for the correct log.
►38. Jailbreakd does not start if Cydia Substrate is installed.
►39. Boot-nonce is not installed if it is already there.
►40. Obvious internal changes.
►41. Jailbreak is obviously faster.
►42. Fixed gross kernel memory leak.
►43. Fixed shutdown or stop, leading to a reboot.
►44. Fixed a logical error that led to disabling fixes for jailbreaking when Substrate was installed, but Load Daemons was disabled, which was introduced in the previous build (beta 6).
►45. Fixed a bug in the restoration of the file system (RootFS) for iOS 11.0 - 11.2.6, which was presented in the previous build (beta 6).
►46. ​​Fixed cache error.
►47. Improved check for updates.
►48. Jailbreak has become faster.
►49. Fixed error in file system recovery (RootFS) for iOS 11.0 - 11.2.6, due to which it did not work on some devices.
►50. Fixed bug in checking for updates.
►51. Fixed a bug in the posix_spawn shell that caused strange problems on some devices (known to cause the problem "(24/40)".
Changes v2.0.2:
►1. Fixed bugs in the application.
►2. Increased jailbreak speed.
►3. Updated built-in resources.
►4. New technique for locking certificate revocation.
Changes v2.0.1:
►1. Official release v2.0.0 to make version tracking easier.
Changes v2.0.0r3:
►1. Fixed cache error.
Changes v2.0.0r2:
►1. Fixed an error in creating a snapshot of the file system.
►2. Added button for manual reset of logs instead of automatic reset.
►3. Fixed installation of a snapshot of the file system.
Changes v2.0.0r1:
►1. Added SpringBoard restart button for iOS 11.4 - 11.4.1 (no jailbreak for these versions).
►2. Improved reliability of the Restart button.
►3. Fixed multi_path permissions check.
►4. Added compatibility for other jailbreaks to fix applications such as iCleaner and fix the bootstrap error.
Changes v2.0.0:
►1. Initial Cydia Substrate support (Cydia Substrate update is required, which will be released later by Jay Freeman).
►2. OTA updates for jailbreak using Cydia, without rebooting.
►3. Added the ability to reinstall OpenSSH, Cydia.
►4. Button to restart SpringBoard without jailbreak.
►5. A button to restart the backboardd so that you can jailbreak with broken tweaks.
►6. Updated bootstrap, fixed jailbreakd error.
►7. Fixed a problem with battery consumption.
►8. Fixed ELOD (Electra Loop Of Death).
►9. Improved system restart speed, fixed countless bugs.
►10. Numerous improvements, not to remember all.
Changes v1.1.4:
►1. Fixed bug when searching offsets.
Changes v1.1.3:
►1. Fixed bug when starting jailbreakd.
Changes v1.1.2:
►1. Improved code, significant improvements in the Empty_List vulnerability (VFS) and minor Multi_Path improvements (MPTCP).
Changes v1.1.1:
►1. Added ECID display.
►2. Added button to open source code.
►3. Fixed the difference in errors associated with the file system (RootFS).
►4. Added update of icon cache, version checking, vulnerability selection, jailbreak status check, other improvements.
Changes v1.1.0:
►1. Automatic selection of the best vulnerability depending on the situation.
►2. Rewritten version checking.
►3. Detailed error message with the content of the code.
►4. Improved memory management.
►5. Optimized and cleaned code.
►6. Fixed a problem with the repository.
►7. A new method is used to disable automatic updating.
►8. Fixed a series of errors.
Changes v1.0.3:
►1. Fixed a problem with the support of beta versions of iOS.
Changes v1.0.2:
►1. Enabled and fixed file system recovery (RootFS) on iOS 11.0 - 11.2.6.
Changes v1.0.1:
►1. Disabled file system recovery (RootFS) on iOS 11.0 - 11.2.6 due to insecurity.
Changes v1.0.0:
►1. Fixed the error of recovery, remounting of the file system (RootFS).
►2. The Settings tab corresponds to the rest of the UI.
►3. Fixed bugs.
RC9 changes:
►1. Fixed file system remount error (RootFS).
►2. Added more detailed error message.
►3. Added a switch to increase the memory limit to improve stability.
►4. Added compatibility for correct work with some tweaks that were specially created for other jailbreaks.
RC8 changes:
►1. Fixed file system remount error (RootFS), added warning about work done on iOS 11.0 - 11.1.2 and 11.4 beta 1/2/3
RC7 changes:
►1. Fixed file system recovery (RootFS) error on iOS 11.2 - 11.2.6, improved multi_path reliability.
RC6 changes:
►1. Enabled logging, improved update checking, fixed multi_path work.
RC5 changes:
►1. Fixed the demon videosubscriptionsd.
►2. Fixed a bug about non-support, fixed update check.
RC4 changes:
►1. Added display of the device uptime.
►2. Added information about the application version.
►3. Using system fonts.
RC3 changes:
►1. Added switch for manual file system recovery (RootFS).
►2. Tweak settings are not reset when restoring a file system (RootFS), additional fixes.
RC2 changes:
►1. Added Dynastic repository, fixed bugs on some devices with iOS 11.4 beta 1/2/3