[X]Assistant

[4r2na]

TP-Link Archer MR200- discussion пїЅ
LTE Wi-Fi Router: 2.4GHz (300Mbit \ s) - 5GHz (433Mbit \ s) | 4 • 100Mbit \ s

• In the subject are allForum Rulesor10 commandments novice who is hard to master the Rules of the Forum
  
• Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
  
• Instead of saying “Thank you!” UseIf you have less than 15 posts - click on the button.under the message where they helped you, and write thanks.
  
• Useful topics to note:Forum FAQ, How to search the forum?, How to remove the image under the spoiler.

Description

Wi-Fi-router with built-in LTE-modem. Or vice versa LTE-modem with built-in Wi-Fi-router. As you like.

Specifications

General characteristics

Certified Product Yes
1 year warranty
Type of Wi-Fi access point
802.11n wireless standard, 802.11ac, 802.11a / b / g
Max. speed wireless connection 733 Mbit / s
The frequency 2.4 / 5 GHz

Reception / Transmission

Power transmitter 23 dBM
Protection of information WEP, WPA, WPA2

VPN

Support for VPN pass through there
Support for VPN-tunnels There

Monitoring and Configuring

Web-based interface There
SNMP Support Yes

Options access point / bridge

Port speed 100 Mbps
There is a bridge mode

Router

There router
DHCP-server Yes
Firewall (FireWall) There
NAT There
Static Routing Yes
There SPI
Demilitarized Zone (DMZ) There
Dynamic DNS support is there

Antenna

The number of external antennas 2
Type detachable external antenna
The number of internal antennas 3

Additionally

Black colour
Dimensions (Wxhxd) 202x34x141 mm
Additional information two-LTE external antenna, built-in support for 3G and LTE

Useful information

Official page
3dnews review
Overview of the mnmag
Overview of the theGeek

There is no curator in the subject. For questions about filling caps, please contactauto RUin QMS or moderators section through a buttonunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been edited4r2na - 25.09.17, 16:44

[MrEugenX]

MrEugenX @ 11.03.20, 15:16

Guys, I can not ask for Archer MR200 v1 which was issued by the provider with custom firmware which is very tupit. I would like to fill in the firmware of TP-Link or OpenWRT. I tried to flash the firmware of TP-Link but I get an error: Error code: 4503 (The upload file was not accepted).

#
Attached images

Decision:

https: //forum.openwrt....rmware-install/57386/7 + https: //forum.openwrt....-reply-dont-work/57529

Post has been editedMrEugenX - 13.03.20, 18:06

[yejik]

I ask for advice.
I bought a router somewhere one month ago. Used everything was good, the speed was so-so 20 - 25 megabits but the SNR was from 0.8 to 1.6, moved to another location. SNR 16 - 22 speed 50 - 100megabit but began plugging, it happens every hour is more or less frequently, and the router in intrfeyse shows good levels of signal, but where the internet draws a red mug with a cross and then itself restores, sometimes you need to reboot sometimes simply walk around web interface and then again ok speed. The difference found in the fact that the earlier the router yl included just in the socket, and now into a surge protector, today switched to a regular electrical outlet, or rather extension cord, already working for several hours. But out of the house on the phone is connected to vozmvscheniyu vayfay network, and immediately issued a message that the network without the Internet but the Internet has appeared a few seconds later. Can the router due to buggy line filter. And so if the interface vyglyaditt Internet from the network does not come. but there is still a little "krmanny" router megaphone it with the same simkarty error does not.

[rudnevale]

Uhans70,



where is it? not found

Serg_NSK_RU @ 04.03.20, 10:55

"Devices" on

and I have? since the tariff for the device? 40GB and night anlim. What they still nadoooo ????
The help, guys, the day rate of PPC is small, the night of 60 and the phone is always good. How does this woman have to change, chtbo them fuck.?

[Uhans70]

rudnevale, Select Settings distribution channel wi-fi number 13 or 14, as a rule in the house are interference from concurrent routers in most one default frequency (Auto), as well as elaborate on what frequency a reliable and 3G or 4G steady reception on default (Auto), which is not good and leads to falling asleep signal reception, good luck.

[rudnevale]

Uhans70 @ 25.03.20, 20:57

rudnevale, Choose settings distribution channel wi-fi number 13 or 14, as a rule in the house are interference from concurrent routers in most one default frequency (Auto), as well as elaborate on what frequency a reliable and 3G or 4G stable reception default (Auto), which is not good and leads to falling asleep signal reception, good luck.

Thank you, I know I have a router connected via lan cable to noutbkuku. Vafaley I almost never use, speed, and there and there is not very much. I Tele2 speed pruned day and robust design. While on the phone 40 on my router less Mbit Skorosoto normal at 2:00 nochi- 60. but I have to sleep, I'm sorry.

Post has been editedrudnevale - 25.03.20, 22:47

[yejik]

The router continues to squeeze. After 10 minutes after the Internet simply falls. The interface on the internet site red icon. Could this be due to the bars on the window. But when running 70 megabits issues. The signals are normal. I do not know what to do already. In this case, a pocket router in the same place for days worked. But also I worked for days and had no problems subject to another apartment. What can be generally causes ingress Internet signal at a normal level. Where to dig. Reset has not helped.

And it seems that he seemed asleep. Because here if you actively use the Internet. Eg serial download or watch Youtube it does not fall. But it is necessary to stop to talk for at least 10 minutes of not even being disconnected from vayfay. Immediately triggered what that trigir and all internet disconnected.

Post has been editedyejik - 28.03.20, 08:22

Reason for editing: 1

[uk_guerillo]

yejik @ 28.03.20, 08:20

And it seems that he seemed asleep. Because here if you actively use the Internet. Eg serial download or watch Youtube it does not fall. But it is necessary to stop to talk for at least 10 minutes of not even being disconnected from vayfay. Immediately triggered what that trigir and all internet disconnected.

A similar situation, the router at night like to sleep and in the morning there is no Internet, we have to reboot. Surely this is somehow treated.

[Gunnermidas]

Comrades, a native capacity 4g external antenna?

[Gunnermidas]

Prompt and any connector our friend, if you shoot home antenna and an external? Neutral sma female?

[Gunnermidas]

Oh, and radishes, no one moved, even ...

Comrades, come mr200 v4
There were conflicting data on the network at the expense of the connectors.

Standard sma mother.

[petropolys]

Hello not much kick might have missed!
general archer mr200 v1 turned into a brick after manipulation restore the firmware after a factory openwrt none lan port of the PC is not defined even if you put ip soldered on instructions usb uart boot log rides in a circle tpl stops him but through tftp can not upload firmware as none lan port does not work

is there any way out?

[zernovoi]

Hello and good health!

And who have external antenna LTE-tried to mount to the router? MIMO there should be, because 2 connector? And how to learn on the polarization - in datasheet no info
I MR400 v3 (LTE-two detachable antenna), did not find topics specific to the MR400, so I am here, I think, from the MR200 is not much different

Thanks to all!

[Gunnermidas]

I Tried. And while in the process.
Vodafone only our sense of smell completely lost. The native antennas 5-9, and MIMO mikrotik 0.8-1.2
And in all the rules plow.
So evil is not enough.

Post has been editedGunnermidas - 26.04.20, 22:24

Reason for editing:

[people1992]

Guys, all the greetings, but there is a decision to mr 200 for v4 firmware? or only RP?

[Gunnermidas]

people1992Which in this necessity?

[people1992]

Gunnermidas, You must configure the WiFi hand with corporate SIM cards)

[people1992]

GunnerMidas,
Generally need to change imei on the device, as far as I know it can be done only by flashing)

[sashzxc]

people1992 @ 01.05.20, 14:04

GunnerMidas,
Generally need to change imei on the device, as far as I know it can be done only by flashing)

as? It is also necessary.

Posted on 05/01/2020, 15:54:

yejik @ 03.03.20, 10:45

That is, the router for 6000 rubles with external antennas, takes less than a box without antennas and the size of a pack of cigarettes, and costing a little more than 2 thousand rubles

Similarly, almost. That expensive router with an external antenna, the modem - the same speed. Money down the drain

[sashzxc]

how to find imei router?

[~ Greg ~]

sashzxc
throughhttp://192.168.1.1/at the bottom is written
Firmware Version: 0.9.1 1.2 v004a.0 Build 180502 Rel.53881n Hardware Version: Archer MR200 v1 00000000 IMEI: *** Support
also at the bottom of the housing with the sticker number.