Archer C7 - Discussion | Wi-Fi Router



Rep: (1)
TP-Link Archer C7 (AC1750 Dual Band Wi-Fi Gigabit Router)- Discussion
Wi-Fi Router 802.11a / b / g / n / ac | 2.4GHz frequency (450Mbit \ s) | 5GHz frequency (1300Mbit \ s) | LAN 4x1000Mbit \ s | USB 2x2.0 type A |

Attached Image

The forum decided to post images under the spoilerPicture

Specifications
HARDWARE CHARACTERISTICS
Interface 4 LAN ports 10/100/1000 Mbit / s
1 10/100/1000 Mbps WAN port
2 USB 2.0 ports
Buttons WPS / Reset Button
Wireless on / off button (wireless on / off)
Power On / Off Button
External power supply 12 V DC / 2.5 A
Dimensions (WxLxH) 243 x 160.6 x 32.5 mm
Antenna type 3 removable 5 GHz antennas with 5 dBi gain (RP-SMA)
3 internal 2.4 GHz antennas

PARAMETERS OF WIRELESS MODULE
IEEE 802.11ac / n / a wireless standards for 5 GHz frequency
IEEE 802.11b / g / n for the 2.4 GHz frequency
Frequency range (receive and transmit) 2400-2483.5 MHz
5150-5350 MHz
5 GHz transmission speed: up to 1300 Mbps
2.4 GHz: up to 450 Mbps
Sensitivity (reception) 5 GHz пјљ
11a 6 Mbps -96 dBm
11a 54 Mbps: -79 dBm
11ac HT20: -71 dBm
11ac HT40: -66 dBm
11ac HT80: -63 dBm
2.4 GHz
11g 54M: -77 dBm
11n HT20: -74 dBm
11n HT40: -72 dBm
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless functions Enable / disable wireless broadcast, WDS bridge, WMM, wireless connection statistics
Wireless Security Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK

CHARACTERISTICS OF SOFTWARE
QoS (data prioritization) WMM, bandwidth control
WAN connection type Dynamic IP / Static IP / PPPoE /
PPTP (Dual Access) / L2TP (Dual Access) / BigPond
Management Access Control
Local management
Remote control
DHCP server, client, list of DHCP clients,
address reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN traffic pass PPTP, L2TP, IPSec
Access Control Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management
Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, binding by IP and MAC address
Protocols Supports IPv4 and IPv6
Shared via USB Support Samba (storage device) / FTP server / media server / print server
2.4 GHz guest network guest network
one 5 GHz guest network

OTHER
CE, FCC, RoHS certification
Package Archer C7
3 removable antennas
Power adapter
Ethernet cable
Quick Setup Guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista в„ў or Windows 7, Windows 8 / 8.1 / 10
MAC OS, NetWare, UNIX or Linux
Environmental Parameters Operating Temperature: 0 в„ѓ - 40
Storage temperature: -40 в„ѓ - 70 в„ѓ
Operating Humidity: 10% - 90%, without condensation
Humidity during storage: 5% - 90%, without condensation
Firmware
Dumps
Attached fileРЎ7V2.zip(8.95 MB)
Useful


Post has been editedM | A | G - 06.08.20, 01:44
Reason for editing: Working recovery procedure for Archer C7 v2 via TFTP



Rep: (15)
About the gelding and frets.
Why not.
If Lada perfectly modest requests and funds for new gelding there. After all, it is necessary now, not in a month.
And if c7 will last for several years and at the same time he will not constantly fall off the internet, the wi fi - it turns out that I am not lost.
About bandwidth.
See (all written below occurs simultaneously):
50 Mbps for wan to return over (for TV)
+ 50 Mbps on wan with impact on wi fi (for nouta or smart)
100 + - 150 Mbps for lan c impact on lan or wifi (video nas)
+ As a reserve in case - you never know what.

Post has been editedalexis69 - 06.09.20, 15:51



Rep: (38)
* sapienti,
"It is also noted that if using a torrent, the rate has remained stable at around 30-40 MB / s."
Increase speed by aggregating two or more wan you will only see on a torrent. And if you're lucky, when downloading two or more files with the conventional web sites.

"In general, so many questions and so few answers, looking for spices, someone who can help solve the problem of" ports "and a break in the game connection. The connection breaks in the first 6-7 rounds, then it is stable."
It is necessary to check-replace patch cords and put the latest drivers for network cards, sometimes it's better to change the network cards on the new computer, or even use the more powerful. :)

"And the bonus may help circumvent the limit of 100 MB / s"
It seems you have already bypassed. I need a switch - you have it, and then it must be a router (routers) with multi-wan and summing channels. C7 can alter under openwrt and configure multi-wan, only his weak central CPU. You have a connection with authorization? At least two routers in parallel work? (I understand that, yes).
Generally you seek routers router for 2, 3, 4-core cpu with multi-wan or under openwrt, probably in the subject selection of network equipment.



Rep: (0)
* oneunit,
Thank you, yes, a couple of routers work at the same time. I'll try OpenWRT, problems did not arise specifically C7, except the ports issue. It should be the last firmware on wood and everything. 4 Wi-Fi network raised, and connected for many devices 2.4 and 5 Hz, CPU utilization is 80%, some interruptions and delays are not caught. Ie a multi-wan is likely above 100 Mbit / s to get?
Rolling back to the tp-link is possible then? Standard firmware that possibility does not give? Yet, on the Switch from a cheap dns was written, that the restriction of the Svicha 100 Mb / s, but again, with torrents 11 GB for 15 minutes flew by.



Rep: (38)
* sapienti,
You wire from the gigabit service provider? 8 cores? The switch should be put in the gigabits. A C7 can not overpower aggregation, as cpu weak. Able to roll on the stock dual-wan not. Generally, if you have a wire from the provider eight lived, you can try to alter C7 under openwrt and installing multi-wan pack. There is a probability that the rate will rise, but only when downloading torrents. And if you want to aggregate more than 3 channels, and have the router will need to look more seriously.



Rep: (32)
Sapienti @ 06.09.20, 01:22*
rate remained stable at around 30-40 Mbytes / s. 11 GB flown in 15 minutes
if the speed was 30-40, and then had to fly gigs 27-36 ....
..a way - it is a good 100;)

Sapienti @ 06.09.20, 20:01*
Yet, on the Switch from a cheap dns was written, that the restriction of the Svicha 100 Mb / s, but again, with torrents 11 GB for 15 minutes flew by.
What a model Svicha?
..although is now probably even the cheapest keeps 100 on all ports at once ....

PS. IMHO, he and four 100 channel pull, but only with the included Soft / Hard flow (openwrt 19.07)



Rep: (0)
Good evening everyone.
Can someone tell me what can be.
ISP provides access via PPPoE (MTS). Before that was an old kinetics of light, and everything worked more or less normal. I bought this unit, v5 version. And there were interruptions to the Internet, briefly disappears and reappears, and so several times. Then like niche. Then again, this garbage. Xs that do.



Rep: (38)
* Anatol841,
Such behavior is inherent in all brands of routers under certain circumstances. Put a switch between the provider and the router, check the patch cords and network card. The log look, it's there.



Rep: (32)
* Anatol841,
at the time of the disappearance of an Internet pinging the router itself, the provider gateway provider's DNS, someone to internet ....



Rep: (0)
Thank! I observe and poissleduyu.



Rep: (1)
Hi friends

Can anyone help with my problem. There Router v1.1. Included, did a factory reset via the WPS / RESET to default. Ruoter loaded, otkryvaertsya authentication root page, but admin / admin does not accept. More precisely, after entering he does not say that the loan is wrong, but does not go to the web face and asks the login / pass. If you randomly enter any credit - the same thing, just as if the page is updated and re-apply for credit. The only pass elsi leave empty, or there are gaps, it says that an empty / parobely can not be.

I tried to throw proshiku through tftp - it pulls the router, such as the attempts to update, then loaded and all over again.

I tried to feed him through a TFT firmware ddwrt, but after loading the input window again credo of green tplinka. It suggests the idea that it all the same can not be updated, although it SSIDy it shines its default a la TP-LINK-5GHZ_389c66.

There is an idea of ​​how it domuchat?
_______________________________
UPD.

I tried to pour through TFTP previous official firmware eaten - updated. In the authentication window, year 2015 changed to 2014. However, the same behavior.

Post has been editedminikot - 09.09.20, 12:24



Rep: (32)
* minikot If over the phone to try, too, is not?
https: //play.google.co...s id = com.tplink.tether?



Rep: (1)
prorokk-k @ 09.09.20, 12:41*
minikot, if through the phone to try, too, is not?
https: //play.google.co...s id = com.tplink.tether?



You will not believe - earned, thank you)

But the fact that it earned from the phone gave me the idea that the router is still alive. And damn me to try pulled open vebmordu not through Chrome, and through IE and it is authorized)))))))))))



Rep: (32)
* minikot,
IMHO, clearing cookies you too would like to help ...



Rep: (1)
Spec_spb @ 09.09.20, 13:51*
MHO, clearing cookies you too would like to help ...


I had not immediately thought, because the test with two different cars .... but probably will)



Rep: (13)
SQM took the test on Openwrt 19.07.3 (1000MHz percent / 780mgts memory overclocking). And lo! 270mbit already issued. Pleasantly surprised for my second router to IPQ401x issued only 240mbit ... You're feel and 19.07.4 can there that would be better. Impressed!

Post has been editedtreatorc - 09.09.20, 16:50



Rep: (5)
Do not throw slippers at once: blush:, in the subject and on the Internet, neither of which is not found. Archer C7 v.5. Brother hl 2135 printer (not wifi), connected via USB. The problem: the network laptop windows 7 it sees, and no windows at 10, even though the USB cable to the line no problem. HELP!!! : Thank_you: A router is switched on Archer C7, just for that, but I can not connect to the 10-e :( ....



Rep: (32)
* SlaF74,
and your 10 enabled SMB v1?



Rep: (5)
* Spec_spb And where to watch it?


Full version    

Help     rules

Time is now: 11/09/20, 13:26