Archer C7 - Discussion | Wi-Fi Router

Rep: (1)
TP-Link Archer C7 (AC1750 Dual Band Wi-Fi Gigabit Router)- Discussion
Wi-Fi Router 802.11a / b / g / n / ac | 2.4GHz frequency (450Mbit \ s) | 5GHz frequency (1300Mbit \ s) | LAN 4x1000Mbit \ s | USB 2x2.0 type A |

Attached Image

The forum decided to post images under the spoilerPicture

Interface 4 LAN ports 10/100/1000 Mbit / s
1 10/100/1000 Mbps WAN port
2 USB 2.0 ports
Buttons WPS / Reset Button
Wireless on / off button (wireless on / off)
Power On / Off Button
External power supply 12 V DC / 2.5 A
Dimensions (WxLxH) 243 x 160.6 x 32.5 mm
Antenna type 3 removable 5 GHz antennas with 5 dBi gain (RP-SMA)
3 internal 2.4 GHz antennas

IEEE 802.11ac / n / a wireless standards for 5 GHz frequency
IEEE 802.11b / g / n for the 2.4 GHz frequency
Frequency range (receive and transmit) 2400-2483.5 MHz
5150-5350 MHz
5 GHz transmission speed: up to 1300 Mbps
2.4 GHz: up to 450 Mbps
Sensitivity (reception) 5 GHz пјљ
11a 6 Mbps -96 dBm
11a 54 Mbps: -79 dBm
11ac HT20: -71 dBm
11ac HT40: -66 dBm
11ac HT80: -63 dBm
2.4 GHz
11g 54M: -77 dBm
11n HT20: -74 dBm
11n HT40: -72 dBm
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless functions Enable / disable wireless broadcast, WDS bridge, WMM, wireless connection statistics
Wireless Security Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK

QoS (data prioritization) WMM, bandwidth control
WAN connection type Dynamic IP / Static IP / PPPoE /
PPTP (Dual Access) / L2TP (Dual Access) / BigPond
Management Access Control
Local management
Remote control
DHCP server, client, list of DHCP clients,
address reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN traffic pass PPTP, L2TP, IPSec
Access Control Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management
Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, binding by IP and MAC address
Protocols Supports IPv4 and IPv6
Shared via USB Support Samba (storage device) / FTP server / media server / print server
2.4 GHz guest network guest network
one 5 GHz guest network

CE, FCC, RoHS certification
Package Archer C7
3 removable antennas
Power adapter
Ethernet cable
Quick Setup Guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista в„ў or Windows 7, Windows 8 / 8.1 / 10
MAC OS, NetWare, UNIX or Linux
Environmental Parameters Operating Temperature: 0 в„ѓ - 40
Storage temperature: -40 в„ѓ - 70 в„ѓ
Operating Humidity: 10% - 90%, without condensation
Humidity during storage: 5% - 90%, without condensation
Attached fileРЎ MB)

Post has been editedstp101 - 15.10.20, 13:47
Reason for editing: Dump Archer c7 v5

Rep: (286)
* swxswl,
Can you read? Above, I even gave the link.
For gifted screen:
Attached Image

Post has been editedNun70 - 14.12.17, 16:35

Rep: (0)
I bought this router the other day and ran into a problem ((WiFi at 2.4 GHz is very, very slow to measure 1 megabit on speedtest, and 50 Mbit at 5 GHz, I have a 50 Mbps rate).
1.0.0 Build 20170306 rel.39799 (5255)
Hardware version 4. Can anyone come across such a problem?

Rep: (286)
* dmb2004
1. You may be disturbed by neighbors, see which channels are more free.
2. Than 5GHz does not suit?

Rep: (0)
Perhaps you are right, I will try to put the channel manually. I have a Wi-Fi column and google Google does not see 5G. Thank)

Rep: (43)
* NuN70,
And what aboutprohibitionTP-Link installation of third-party firmware on routers? According to TP-Link technical support, there is no way to remove the restriction. Currently studying info and the ability to put LEDE on Archer C7 (RU) _V4. I would not want to make the device ..

Rep: (286)
* swxswl,
V2 has the same check, but I have the last lede and it works fine. In these firmware, they bypass the check for off-firmware. Read forums on this subject.

Rep: (24)
Put this firmware for V4, and everything will be fine

Attached files

Attached MB)

Rep: (6)
* running2000 Is this off-firmware?

Rep: (43)
* running2000
I would like to know what instructions to put, since I found onhttps://lede-project.orgtwo different. The first one says: "Make sure that the LEDE firmware file you are going to install matches your router model and is called" ... .factory.bin ", since you will use it to change the vendor's firmware firmware towards LEDE." Your file is called "c7v4_ru20171031beta.bin". Second: "Flash instruction using restore TFTP:1. PC set to a fixed IP-address 2. Download lede ar71xx versatile archer c7 v4 squashfs factory.bin and rename it to ArcherC7v4_tp_recovery.bin 3. Start the tftp server tp_recovery.bin file in its root directory 4. Turn off the router 5. Press the reset button and keep 6. Turn on the router and hold the reset button and wait ~ 15 seconds 7. Release the reset button and after a short time, the firmware must be transferred to the tftp server 8. wait about 30 seconds to complete recovery " . and inThose. dataArcher C7 v4 is specified - Processor: Qualcomm Atheros QCA9561, apparently the English version of the router. And I have QCA9563 (I opened and looked). In general, it is not clear yet ..

Rep: (24)
* swxswl,
Put through a standard firmware update. This firmware has nothing to do with LEDE! This is a beta version from TP-LINK!
Instructions how to put here:
http: // f = 2 & t = 1368

You'd be surprised what your awesome router is)))

Post has been editedrunning2000 - 22.12.17, 10:34

Rep: (6)
* running2000 where did you get the beta?

Rep: (24)
* deh4ep
From TP-LINK Forum

Rep: (43)
running2000 @ 12/22/17, 12:27*
You'd be surprised what your awesome router is)))

I and so is worth a fresh Russian firmware 2017, is almost everything! Router bought two weeks ago, it was a pity not to v.2, bought v.4 (RU). What is there in the "Beta" can be a new and supernatural? A router actually quite navorochen, I already appreciated. But the fact that I need on the router surveillance, AdBlock - filter through advertising hosts file, torrents, etc .. The standard firmware from Tp-Link that can not be so surprised, "Beta" is unlikely to have! Therefore it is necessary to put the firmware OpenWRT or Lede. The problem is that in v.4 (RU) is a bit different processor, and there is no ready firmware, unlike v.2. And the experience of creating your firmware "for themselves" until enough. Above Nun70 threw the link to the firmware for LEDE v.4, but without WEB-interface Luci, just the command line which is also still necessary to understand. And in the future WEB-interface is needed to make quick changes. In general, all quietly studying, you see, and can ready firmware gash craftsmen ..

Post has been editedswxswl - 23.12.17, 00:34

Rep: (286)
* swxswl,
Well, put luci, it is put in a package. Read how to do it and that's it.
https: //wiki.openwrt.o…/howto/luci.essentials

https: //wiki.openwrt.o…/howto/luci.essentials


Post has been editedNun70 - 23.12.17, 10:23

Rep: (0)
The router has worked for half a year, and with constant network breaks and freezes. I took to replace zyxel with which there were no problems at all, but ... I wanted speed))) Yesterday the router refused to start at all ... it turns on ... it flashes with diodes ... it takes a couple of minutes and everything goes out ... V4 official firmware , I did not do anything with it ....... I spit shorter

Rep: (286)
* telegera,
Well, under the guarantee in the SC, carry, what's the problem?

Rep: (24)
* swxswl,
I laid out for those who had problems with the loss of I-net!
New? So you try it !!! She is the best!

Post has been editedrunning2000 - 23.12.17, 18:54

Rep: (43)
* running2000
Thank you of course, but I do not have I-this router is not lost! Both range plow clearly, as a watch! Firmware 20170306 rel.39799 (5255). The only caveat - that the router itself is heated significantly, in my opinion this is not normal. Before that was 4 years ZyXeL NBG334W EE, so he is not warmed. I think still put on a cent. suitable copper radiator considering future load. And with highlights and nuances firmware LEDE OpenWRT and generally is clear. I will put Linux on a computer. (In addition to Windows and Hackintosh) the benefit of the SSD "extra lying around", and must start to collect himself firmware for themselves. Of course still have to study for a good material and instructions ..

Rep: (0)
I purchased this device Archer C7 (RU) .V4 I read reviews, I don’t know what to do until I unpacked it can change to V2, what do you say? Thanks

Post has been editedshmon1976 - 29.12.17, 12:14

Rep: (24)
shmon1976 @ 29.12.17, 13:13*
I purchased this device Archer C7 (RU) .V4 I read reviews, I don’t know what to do until I unpacked it can change to V2, what do you say? Thanks

* shmon1976
It's your business, but I put the beta firmware and everything is great!

Full version    

Help     rules

Time is now: 22/10/20, 9:39