Set up notifications and background applications for MIUI | All devices with MIUI firmware
Burov077 @ 08.22.17, 10:10
Can there be a normal topic with the output of notifications?
Well, where to take the topic - see for yourself, the choice is big. Starting from the standard Themes app
And ending here, onsavagemessiahzine.com - Catalog of the MIUI v6 / v7 / v8
GameCube @ 08/17/17, 06:03
As a result, notifications from mail and contact began to come, but sometimes with a strong delay
And did not try to make them systemic? Unless of course there is a root.
Human-oid @ 08/16/17, 09:02
system built-in sound and configured
And by chance the topic is not "left"? On the standard checked? If the standard is the same - it may try to ask in the subject.Google Calendar
At the same time, you can put a calendar from there, and check on the mods.
Post has been editedm378 - 23.08.17, 07:27
Hello everyone, guys, help me find a theme with the Russian alphabet, in the standard set of themes on Xiaomi Mi Max 2 so I can't find one, maybe someone has already encountered such problems? Well, or poke your nose :)) I like a newbie, maybe I did not find this on the site :)
Tell me how to make redmi 4a automatically connect to a previously configured wifi network. The tick "auto-connect" in the wifi settings is enabled, in the energy saving all that can be turned off is disabled. But no, the smart does not switch to it when wifi appears, only manually .. And after 10 minutes of inactivity, it disconnects from it. I read the first post in this thread .. I don’t know where else to look. Kick in the right direction.
[email protected], 09:10
Help me find a theme with the Russian alphabet
Above in the message there is in fact on the topics! To begin with, at least specify the firmware! If global, then what is wrong with the themes?
Restwed @ 08.28.17, 20:14
And after 10 minutes of inactivity disconnects from it.
Settings - Wi-Fi - Advanced - Wi-Fi in sleep mode - Enabled.
Settings - Wi-Fi - Saved networks - Delete
Settings - Wi-Fi - Add network.
Yes, and it is useful to indicate the firmware!
If there is a root, you can add a network manually:
/data/misc/wifi/wpa_supplicant.conf
m378 m378 @ 08.29.17, 07:36
Above in the message there is in fact on the topics! To begin with, at least specify the firmware! If global, then what is wrong with the themes?
I suspect that in the contact list there is no Russian alphabet on the right, for a quick transition to the letters. In fact, terribly uncomfortable.
SibD @ 08.29.17, 09:30
I suspect that in the contact list there is no Russian alphabet on the right, for a quick transition to the letters.
Well, if we are talking about this, then this is in my opinion not treated. Change the firmware. Use T9 in the call - it works.
Or, if you have a root / TWRP, edit the existing one. How this is done can be found in the topics on your smart.
As an option to use the firmware from localizers, I do not remember if there is a Russian in contacts on the global weekly,
I have been using firmware from localizers for a hundred years. There are no problems with the themes, or with T9, or with Russian letters.
Yes, and on the weekly, which are based on the Chinese, and this is from localizers, there are many chips that are not on the global weekly or on the global stable.
But this is to your taste. Maybe at MIUI9 they will correct this problem. Because it has long been rising on the forum.
Post has been editedm378 - 29.08.17, 10:03
m378 @ 08.29.17, 07:36
Settings - Wi-Fi - Advanced - Wi-Fi in sleep mode - Enabled.
Settings - Wi-Fi - Saved networks - Delete
Settings - Wi-Fi - Add network.
Yes, and it is useful to indicate the firmware!
If there is a root, you can add a network manually:
/data/misc/wifi/wpa_supplicant.conf
Settings - Wi-Fi - Saved networks - Delete
Settings - Wi-Fi - Add network.
Yes, and it is useful to indicate the firmware!
If there is a root, you can add a network manually:
/data/misc/wifi/wpa_supplicant.conf
Firmware ... and Fick knows what firmware. The smartphone was purchased in mvideo, respectively, the firmware is global, with all the updates released at the moment.
Your advice did not help, I already did a complete reset after the update .. one fic. Well, okay, I'll go, probably, to take back this miracle of Chinese technology)
Restwed @ 08/29/17, 19:14
Your advice did not help
SSID not accidentally hidden? In this case, manual addition of the network helps.
No - understand the settings of the router. Change the network type (frequency), Standard, channel number, etc.
m378 @ 08.29.17, 20:33
SSID not accidentally hidden? In this case, manual addition of the network helps.
No - understand the settings of the router. Change the network type (frequency), Standard, channel number, etc.
No - understand the settings of the router. Change the network type (frequency), Standard, channel number, etc.
No, it is not hidden. Other devices are connected to the router automatically, as soon as they are within range. As it should be.
Something is wrong with the energy saving settings in redmi4a, but what exactly is not clear.
By the way, what does the "Detailed log Wi-Fi" mean? How to view this magazine?
Post has been editedrestwed - 29.08.17, 20:50
Restwed @ 08/29/17, 20:48
Something is wrong with the power saving settings in redmi4a
The only thing I can advise, if the removal of all the saved networks did not help, and manually setting the network, is to change the modem version.
There was a problem with an auto-connection to Wi-Fi on some firmware - I decided, as I wrote a line above.
I think it's easier to ask this question in the topic for your smart.
PS although I would advise just to make a local backup (save it on SD for example) to flash smart via MiFlash with full cleaning.
Post has been editedm378 - 31.08.17, 10:14
m378 @ 08.31.17, 10:03
The only thing I can advise, if the removal of all the saved networks did not help, and manually setting the network, is to change the modem version.
There was a problem with an auto-connection to Wi-Fi on some firmware - I decided, as I wrote a line above.
I think it's easier to ask this question in the topic for your smart.
PS although I would advise just to make a local backup (save it on SD for example) to flash smart via MiFlash with full cleaning.
There was a problem with an auto-connection to Wi-Fi on some firmware - I decided, as I wrote a line above.
I think it's easier to ask this question in the topic for your smart.
PS although I would advise just to make a local backup (save it on SD for example) to flash smart via MiFlash with full cleaning.
Thanks for the answer! I solved the problem more dramatically - I handed over the redmi4a back to the store, changed it to a different brand smart.
m378 rudy1973 SibD @ 08.29.17, 09:30
I suspect that in the contact list there is no Russian alphabet on the right, for a quick transition to the letters.
Confused. Solved by topics. There is an alphabet in the Stock MegaMod theme from the store. But I didn’t like that they were changing the interface too much. The t9 itself on the telephone keypad is in the stock dialer. I installed the Default + theme from the "local collection on the forum", it also has an alphabet, but you need to "rebuild" it on the phone itself. And I replaced the rest of the components component-wise with more stock ones.
P.S. Here it is offtopic, the question is closed.
Post has been editedSibd - 05.09.17, 15:51
Setting voice search on MIUI9
Usually on localized firmware based on Chinese versions,
Not all Google applications are installed.
On global, the voice input application is usually pre-installed.
Then skip the installation and you can go directly to the settings.
For voice search, we need to installhttps: //play.google.co...d.googlequicksearchbox
2 applications will appear ("Google" and "Voice Search")
Open Security (separate application) - Apps - Google - AutoPlay - Enable
Open Security (separate application) - Applications - Google - Permissions - Enable or verify that we would include:
- Sound recording
- lock screen
- Run in background
Check that the restriction is not enabled in the background (1) and you can disable the cleaning of RAM (2):
Security - Battery (Power) - Background Mode - Google - Unlimited.
Or Settings - Battery & Performance - Background Mode - Apps - Google - No Limits.
Settings - Advanced - Language and input - Voice input - Select "Advanced Google features" - Ok
After that in the same place we press a gear - we Adjust necessary:
- Recognition "Ok, Google" - On any screen (it may offer 3 times to say "Ok Google")
- Sounding results - On (if needed)
- Speech recognition offline (if needed)
You can immediately turn on the voice input button on the keyboard if you use:
Settings - Advanced - Language and input:
(1) - Current keyboard (Default) - "Select keyboard" ("Set up input method") - Google voice input - Enable - Ok
(2) - GBoard (if installed, otherwise what is installed there) - Settings - Voice input button - Enable
It is advisable to overload the smart after the settings.
Unfortunately, not all firmware at the moment voice input works after a reboot normally,
especially from localizers that are made on the basis of test ones (not officially released yet).
You must either manually then run the Google application Or you need to make it system!
For this you need a root. I ask to pay attention that on global, this application most likely initially system.
Additionally, you can hang the lock on it!
To convert the application to the system you need to installLink2SD(need root!)
Launch, Find the installed Google application in the list - long press on it, a menu appears - "Convert to system"
Reboot.
P.S. For voice search, you must turn on the screen. With certain versions of the firmware, unfortunately, it does not work on the screen off.
This post was written based on the MiuiPro firmware, the names of some menu items may differ slightly.
Post has been editedm378 - 13.09.17, 10:50
Usually on localized firmware based on Chinese versions,
Not all Google applications are installed.
On global, the voice input application is usually pre-installed.
Then skip the installation and you can go directly to the settings.
For voice search, we need to installhttps: //play.google.co...d.googlequicksearchbox
2 applications will appear ("Google" and "Voice Search")
 |
Open Security (separate application) - Apps - Google - AutoPlay - Enable
Open Security (separate application) - Applications - Google - Permissions - Enable or verify that we would include:
- Sound recording
- lock screen
- Run in background
 |
 |
 |
 |
Check that the restriction is not enabled in the background (1) and you can disable the cleaning of RAM (2):
Security - Battery (Power) - Background Mode - Google - Unlimited.
Or Settings - Battery & Performance - Background Mode - Apps - Google - No Limits.
 |
 |
 |
Settings - Advanced - Language and input - Voice input - Select "Advanced Google features" - Ok
After that in the same place we press a gear - we Adjust necessary:
- Recognition "Ok, Google" - On any screen (it may offer 3 times to say "Ok Google")
- Sounding results - On (if needed)
- Speech recognition offline (if needed)
 |
You can immediately turn on the voice input button on the keyboard if you use:
Settings - Advanced - Language and input:
(1) - Current keyboard (Default) - "Select keyboard" ("Set up input method") - Google voice input - Enable - Ok
(2) - GBoard (if installed, otherwise what is installed there) - Settings - Voice input button - Enable
 |
 |
 |
 |
 |
It is advisable to overload the smart after the settings.
Unfortunately, not all firmware at the moment voice input works after a reboot normally,
especially from localizers that are made on the basis of test ones (not officially released yet).
You must either manually then run the Google application Or you need to make it system!
For this you need a root. I ask to pay attention that on global, this application most likely initially system.
Additionally, you can hang the lock on it!
 |
To convert the application to the system you need to installLink2SD(need root!)
Launch, Find the installed Google application in the list - long press on it, a menu appears - "Convert to system"
Reboot.
 |
 |
 |
P.S. For voice search, you must turn on the screen. With certain versions of the firmware, unfortunately, it does not work on the screen off.
This post was written based on the MiuiPro firmware, the names of some menu items may differ slightly.
Post has been editedm378 - 13.09.17, 10:50
Friends, tell me what you can do?
There xiaomi redmi note 2 with drain miui 8. It application to synchronize with smart clock (wiiwatch) does not work in the background, and from the cache. That is, it is impossible to hang a lock that used miui this application does not close. All ticks from power and permissions I put the only thing I can not remove the optimization of internal memory, or 3000 mAh battery will discharge to zero for 3 hours on the phone in sleep mode. So, this synchronization application stupidly turned off at the opening of any more or less difficult for the internal memory of the application. Miui so optimize. How to exclude the killing of the sync application with miui smartchasami 8 operating system?
There xiaomi redmi note 2 with drain miui 8. It application to synchronize with smart clock (wiiwatch) does not work in the background, and from the cache. That is, it is impossible to hang a lock that used miui this application does not close. All ticks from power and permissions I put the only thing I can not remove the optimization of internal memory, or 3000 mAh battery will discharge to zero for 3 hours on the phone in sleep mode. So, this synchronization application stupidly turned off at the opening of any more or less difficult for the internal memory of the application. Miui so optimize. How to exclude the killing of the sync application with miui smartchasami 8 operating system?
Plus a "primer" for notifications. Served to check your settings. Initially, there were no problems with the notification. All settings are made by intuition, everything works. But I can not solve the problem with the delay of notifications in sleep mode. The delay of 30 seconds. up to 3 min Depends on the time of sleep, the time of the last entrance to the messenger ...
(Redmi 4x, 8.2.10.0)
Post has been editedzenITfon - 11.09.17, 22:49
(Redmi 4x, 8.2.10.0)
Post has been editedzenITfon - 11.09.17, 22:49
[email protected], 21:38
It works not in the background, but from the cache
What does "running from cache" mean? If you have it running at the moment, when you press the left touch button,
you should have it in any case on the list of the last!
Something does not work - make it systemic.
ZenITfon @ 11.09.17, 22:47
The delay of 30 seconds. up to 3 min
It depends on the firmware settings, how quickly the process goes to sleep and in which mode, from the applications themselves.
It is difficult to say something remotely. See the first post in the thread, spoiler "For those who persistently fail to configure notifications"
In the application, which is indicated there, you can set the time of the survey, it can help.
Try to translate the necessary applications into the system, try to change the firmware.
Post has been editedm378 - 13.09.17, 06:57
I would also like to note that these items are not in the system settings, but in the pre-installed neoSafe application. I constantly turned off the pedometer, and no tricks helped until I went into this application ->Energy Saving ->Gear ->Clear with a large energy consumption - remove this tick.
m378 @ 09/13/17, 06:52
What does "working from cache" mean?
Here is:
 |
And when you click on the left touch button it is not:
 |
How will the application become systemic help me here? Miui 8 will not close it conducting its optimization? And how without a root to make the application system?
[email protected], 20:44
There is
And what is there? I see only a notice in the blind, this is just a service.
Click on it, as I understand it should open, press the left touch button (without going to the desktop or something else) - it should be in the list of running. Or not?
[email protected], 20:44
How will the application become systemic help me here?
And think for yourself;)
[email protected], 20:44
And how without a root to make the application system?
No, just putting the root. Unless having brought the application itself to the firmware archive, but the first one I think will be easier.
Restrictions of background activity for him removed exactly? Autoload and everything else is done according to the instructions, checked carefully?
Check permissions for this application (run in background)
On MIUI9, there is a security item “Cleaning RAM”, namely a separate item, like “Cleaning Garbage”, etc., where you can set an exception for cleaning applications from the switches.
Here is installed your application from the market. How do I understand it?
I have everything in the list of running!
 |
 |
 |
m378 @ 09/14/17, 09:02
Here is installed your application from the market. How do I understand it?
I have everything in the list of running!
I have everything in the list of running!
That's what helped, good man!) The application was originally downloaded not from the market, but from the manufacturer’s smart watch site and it was not displayed in the list of running programs. And the one installed from the market is displayed as it should.
Posted on 09/14/2017 at 23:41:
m378 @ 09/14/17, 09:02
Here is installed your application from the market. How do I understand it?
I have everything in the list of running!
I have everything in the list of running!
The application from the market fell as it should. The original site of the manufacturer was with glitches.
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement