TP-Link TL-WR845N - Discussion | [wifirouter] Wi-Fi Router: 11n: Up to 300 Mbps



Rep: (131)
TP-Link TL-WR845N - discussion пїЅ
Wi-Fi Router: 2.4GHz (11n: Up to 300 Mbps (dynamically) 11g: Up to 54 Mbps (dynamically) 11b: Up to 11 Mbps (dynamically) Mbit \ s) | 1 10/100 Mbps WAN port • 100Mbit \ s


Attached Image

Appearance
Attached Image
Attached Image
Attached Image
Description
Speed ​​up to 300 Mbps suitable for demanding applications such as streaming HD video
Three antennas increase the stability and reliability of the wireless connection
Easy setup of a secure connection by pressing the WPS button
Bandwidth control by IP address allows administrators to determine how much bandwidth is assigned to each device.
IPv6 support
Tether mobile application provides quick installation and configuration of the router from a smartphone
Specifications
Interface 4 LAN ports 10/100 Mbps
1 10/100 Mbps WAN port
Buttons Reset Button
On / off button Wi-Fi
On / off button power supply
Antenna 3 x 5 dBi fixed omnidirectional antennas
External power supply 9 V / 0.6 A
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Wireless Transmission Standards
Dimensions (WxLxH) 230 x 144 x 35 mm
PARAMETERS OF WIRELESS MODULE
Frequency range (receive and transmit) 2.4-2.4835 GHz
Transfer speed 11n: Up to 300 Mbps (dynamically)
11g: Up to 54 Mbps (dynamically)
11b: Up to 11 Mbps (dynamically)
Sensitivity (reception) 270 Mbps: -70 dBm with 10% PER
130 Mbps: -74 dBm with 10% PER
108 Mbps: -74 dBm with 10% PER
54 Mbps: -77 dBm with 10% PER
11 Mbps: -87 dBm with 8% PER
6 Mbps: -90 dBm with 10% PER
1 Mbps: -98 dBm with 8% PER
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless functions Enable / disable wireless broadcast, WDS bridge, WMM, wireless connection statistics
Wireless Security Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK
CHARACTERISTICS OF SOFTWARE
QoS (data prioritization) WMM, bandwidth control
WAN connection type Dynamic IP / Static IP / PPPoE /
PPTP (Dual Access) / L2TP (Dual Access) / BigPond
Management Access Control
Local management
Remote control
DHCP server, client, list of DHCP clients,
address reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN traffic pass PPTP, L2TP, IPSec (ESP Head)
Access Control Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management
Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, binding by IP and MAC address
Protocols Supported IPv4 and IPv6
Guest network One 2.4 GHz guest network
Firmware
Useful


There is no curator in the subject. For questions about filling caps, please contactauto RU in QMS or moderators section through a button Pictureunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editedsafanda3 - 30.11.17, 13:20
Reason for editing: Transition firmware



Rep: (0)
Attached filelede-17_01_2-ar71xx-generic-tl-wr845-v1-squashfs-factory is she? where to shove it? : rofl:
The web interface tells me to get out of here: D

Post has been editedKEKS1993 - 31.08.17, 00:50



Rep: (445)
* stp101,
In my clearer already impossible.TP-Link TL-WR845N - discussion (Post vovan26_ # 63570199)



Rep: (0)
Author but what is more important where to poke where what to choose for your model ?! : girl_cray:

Post has been editedKEKS1993 - 31.08.17, 00:55



Rep: (445)
KEKS1993 @ 08/31/17, 02:55*
choose for your model?
And what is your model. :)



Rep: (0)
TP-Link Wireless N Router WR845N
Model No. TL-WR845N



Rep: (567)
More understandable instructions for installing firmware from wr841n v11 through a transitional firmware fromvovan26_
The essence of the firmware is to download this file, unpack it and upload the interface of your current firmware via the web.
TP-Link TL-WR845N - discussion (Post vovan26_ # 63570199)the one that lede-17_01_2-ar71xx-generic-tl-wr845-v1-squashfs-factory.rar
Now we go through WinSCP and upload the firmware to the / tmp / directory
Attached Image
Attached Image

We close WinSCP, we will not need it anymore.
Further we open Putty we connect on ssh on 192.168.1.1 the login root the password is not necessary.
Write commands
cd / tmp /
mtd write * .bin firmware

The firmware will start.
At the end we write
reboot

Firmware without boot sector from wr841n v 11
Attached filewr841nv11_tp_recovery.bin_.zip(3.48 MB)

Well, at the end, update the firmware as usual by downloading the latest firmware for wr841n v11 from the tp-link website
Is done.
The author of the method and transition firmwarevovan26_

Post has been editedstp101 - 31.08.17, 02:04



Rep: (445)
KEKS1993 @ 08/31/17, 03:24*
TP-Link Wireless N Router WR845N
Model No. TL-WR845N

Can you open the router and see the full processor name and flash?
Model No. TL-WR845Nv3

Post has been editedvovan26_ - 01.09.17, 09:20



Rep: (0)
Do not get unscrewed 2 bolts he bastard hold xs how or there special rivets which
I don't want to break the body

Post has been editedKEKS1993 - 01.09.17, 17:42



Rep: (445)
KEKS1993 @ 09/01/17, 19:30*
Do not get unscrewed 2 bolts he bastard hold xs how or there special rivets which
Ordinary clips, gently podden a knife, then remove, putting a little effort.
See pictures:https://wiki.openwrt.org/toh/tp-link/tl-wr841nd

Post has been editedvovan26_ - 01.09.17, 17:45



Rep: (432)
KEKS1993 @ 09/01/17, 17:51*
something is holding very tight on all sides

Attached Image



Rep: (0)
If you still need a photo I will do so far from the autopsies
two common screens


Attached images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image



Rep: (432)
On it, the ROM is built into the chip or something? In the pictures are not visible 25Q scheme



Rep: (0)
* Herzz,
What picture do you have it for now?



Rep: (432)
* KEKS1993,
The chip of such a plan should be (highlighted in yellow)
Attached Image



Rep: (0)
* Herzz,
It?
Attached Image


Post has been editedstp101 - 01.09.17, 18:42
Reason for editing: Spoiler



Rep: (432)
* KEKS1993,
That power chip. So inside the ROM is built.



Rep: (131)
IRON, WR845N ver3 is built on:

CPU - MTK MT7628NN 575MHz
RAM - Winbond DDR2 512Mbit
Flash - Winbond Nor Flash 64Mbit info from technical support



Rep: (445)
Safanda3 @ 09/01/17, 21:13*
CPU - MTK MT7628NN 575MHz
RAM - Winbond DDR2 512Mbit
Flash - Winbond Nor Flash 64Mbit info from technical support

RAM - Winbond DDR2 512Mbit = 64mb
Flash - Winbond Nor Flash 64Mbit = 8mb



Rep: (445)
* KEKS1993,
http://wrt.raxp.ru/led…3-squashfs-factory.bin
Try to pour on tftp, rename the firmware to tp_recovery.bin
In the network company - 192.168.0.66

Post has been editedvovan26_ - 01.09.17, 21:06



Rep: (0)
* vovan26_,
tftp this kuda?


Full version    

Help     rules

Time is now: 18/06/20, 16:59