TP-Link TL-WR845N - Discussion | [wifirouter] Wi-Fi Router: 11n: Up to 300 Mbps
If you have less than 15 posts - click on the button.
under the message where they helped you, and write thanks.
Safanda3 @ 04.07.17, 15:31
This is a matter for everyone individually.
This is the "general" answer. It is desirable that the desire was somehow justified. At least by statistics, observation, etc. And just like that ...: rolleyes:
A123l @ 04.07.17, 15:35
This is a "general" answer.
You have created a topic. It may be read. They helped you. Satisfied with the result. All this is good and even beautiful! But if they ask what did not suit the drain and why a switch to an alternative firmware is desirable, then you should probably share your impressions ... Well, at least it’s accepted on the forums. What is offensive?
A123l @ 04.07.17, 17:35
This is the "general" answer. It is desirable that the desire was somehow justified. At least by statistics, observation, etc. And just like that ...: rolleyes:
And here the statistics? Here for example I want to watch iptv on two, three TV sets without any prefixes, I want to take an Internet from a neighbor and use my router as a client.
[email protected], 17:49
And the instructions, even if superficial and no
The time will come.
A123l @ 04.07.17, 16:03
But if they ask what did not suit on the drain and why the transition to an alternative firmware is desirable
Well, I govre, they flooded: D But what's the difference that they don’t like, maybe I don’t like the green color, maybe because the interface is in English, maybe because it’s a sink, and maybe purely to learn something new, which what the difference difference did not suit? Each has its own selection criteria, and the fact that it does not suit one, the second on the buzz, so that all these inquiries are nothing more than a flood.
Post has been editedstp101 - 04.07.17, 16:10
Vovan26_ @ 07/04/17, 16:04
Here for example I want on two, three TV sets without any consoles to watch iptv
Is there enough space for this goal in your native flash?
A123l @ 04.07.17, 18:11
Is there enough space for this goal in your native flash?
A123l @ 07/04/17, 18:17
About the possibility of including IPTV packages in the firmware
The ultimate goal of the author of the topic was the firmware of this router with alternative firmware. I advised him to contact you. You offeredyourtransition method. IPTV and stock certainly has nothing to do with it.
It is possible to take such a router cheaply. So I'm interested.
Supposed to be usedaswith the possibility of a print server.
Post has been editedA123l - 04.07.17, 16:43
[email protected], 16:09
What difference does it not like
It is possible to take such a router cheaply. So I'm interested.
Supposed to be used
Post has been editedA123l - 04.07.17, 16:43
The router became completely 841v11, the name of the firmware for recovery: wr841nv11_tp_recovery.bin
 |
Transition firmware is represented by the SW.xssa .
The process of flashing:
We fill the transitional firmware through the WEB-interface, open WinSCP, by mtd we fill in the OFF firmware 841v9, 10, 11, which one is more like, after cutting out the yubut !!!
http: //forum.tp-linkru..14f36fb422545bd7dc29b5
then via the web interface we upload the firmware from the yubut of the selected version.
lede-17_01_2-ar71xx-generic-tl-wr845-v1-squashfs-factory.rar(3.32 MB)
The process of flashing:
We fill the transitional firmware through the WEB-interface, open WinSCP, by mtd we fill in the OFF firmware 841v9, 10, 11, which one is more like, after cutting out the yubut !!!
http: //forum.tp-linkru..14f36fb422545bd7dc29b5
then via the web interface we upload the firmware from the yubut of the selected version.
Attached files
lede-17_01_2-ar71xx-generic-tl-wr845-v1-squashfs-factory.rar(3.32 MB) safanda3, Try to roll back like this: OpenWrt 841vx>on mtd OF firmware without u-boot>via WEB OF firmware with u-boot.
Firmware for rollback and restore tp-845v1.
wr845nv1_tp_recovery.bin .rar(3.46 MB)Post has been editedvovan26_ - 08.08.17, 19:09
Vovan26_ @ 08.08.17, 18:29
Try to roll back so
Everything turned out without problems, the router again is 845v1.esche again, thank you very much for your hard work and time with me +++, now you can easily switch from 841 to 845 and back
Here I have a problem in general, I plug the cable into the router, the speed cuts to half, now I attach screens
This is with the router when I insert the cable on the line but everything is 100, what kind of crap and when the LAN cable from the router to the network card, then the card lights up orange when on the straight green what kind of nonsense was someone pushing away with such a problem? and by the way there is a crack for TP-Link Wireless N Router WR845N? thank
This is when the cable is networked directly
And just in case the interface of the router may need someone) well, what really is not the Russian language
Post has been editedstp101 - 30.08.17, 23:53
 |
 |
And just in case the interface of the router may need someone) well, what really is not the Russian language
 |
Post has been editedstp101 - 30.08.17, 23:53
Reason for editing: Spoiler
KEKS1993 @ 08/30/17, 23:21
when the lan cable from the router to the network card, then the card lights up orange when on straight green what kind of nonsense
This nonsense is most likely called the 100 megabit port of the router with a gigabit network card and the gigabyte port of the provider switch and the gigabit network card.
About the Russian language only by the method from the cap, that is, the firmware upload from 841, as far as I know there are no Russian firmware for it.
Post has been editedstp101 - 31.08.17, 00:02
KEKS1993 @ 08/31/17, 00:11
Do I need to upload 841 firmware otherwise how?
stp101 @ 30.08.17, 23:55
As far as I know there are no Russian firmware for him.
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement