X96 [Android] | [TV Box] [AMLogic S905X]
X96
Are you satisfied with the work of the console?
More than [ 375 ] ** [35,68%]
50/50, there are flaws [ 535 ] ** [50,9%]
Not [ 141 ] ** [13,42%]
Total votes: 1051
 



Rep: (55)
DiscussionX96
Picture[Andriod] [TV Box] [S905X]
Discussion » | Catalog of programs for media consoles » | Discussion X96 Mini Amlogic S905W » | Marriage and Repair »

Specifications
Processor: Amlogic s905x 4 core Cortex A53 2.0GHz
Video Core: Mali-450 MP
HDMI: 2.0A 4K * 2K (not tested)
RAM: 1G or 2G
ROM: 8G or 16G
Max. memory card capacity: up to 64GB
Black colour
Codecs: H.264 / AVC, H.265, VP9, ​​RealVideo8 / 9/10
Video formats: AVS, DAT, ISO, MKV, MOV, MPEG, MPEG-4, MPEG1, MPEG2, RM, RV, VP9 Profile-2, WMV
Audio Formats: AAC, FLAC, MP3, OGG, RM, WMA
Photo formats: BMP, GIF, PNG, TIFF
WIFI: 2.4ghz 802.11b / g / n
Connectors: AV, Ethernet, HDMI, LAN, Optical, TF card, USB2.0
Power supply: 5V 2A
Bluetooth: no
Equipment: 1 x X96 TV box, 1 x HDMI cable, 1 x remote control, 1 x power supply, 1 x instruction, optional - 1 x additional IR receiver, 1 x board for mounting on TV

A photo
Reviews
Instructions
TWRP
Firmware
Attention!
Firmware from the manufacturer
Custom firmware

Buying and Accessories
Useful



There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedVolkodav. - 21.12.20, 17:45
Reason for editing: ATV9 for black fee, V88-1.0



Rep: (254)
I’m tormented for a couple of days with the prefix, in light mode, so to speak, I didn’t understand this stinky code and so I could not lose anything with the iPhone, help good people, and where to find the firmware so that everything is already sewn in, there are all kinds of other repositories angry birds



Rep: (106)
Killer Beach @ 03/26/17, 9:13*
If about android, then from the box from the seller
In the settings, look at the firmware number. I will explain why if the frequency is 1.5 MHz, then the problem is due to the firmware. Just like you did not know what it could be connected with (I watch Torrent a proxy, M3U list) an experimental way (I put 15 firmware pieces) I found out that only at a frequency of 2 MHz everything works fine.



Rep: (5)
* ncux3012
and firmware can change the frequency?



Rep: (106)
Killer Beach @ 03/26/17, 9:20*
and firmware can change the frequency?
Of course.



Rep: (5)
* ncux3012
1.5 mg. if you can give a link or instructions and at the same time, your reputation will rise. ;)

Post has been editedkiller beach - 26.03.17, 09:24



Rep: (322)
Serg71kz @ 03/25/2017, 21:15*

Yes, remove this patch from the header. It was made under a certain firmware and even for another device.



Rep: (106)
Killer Beach @ 03/26/17, 9:24*
1.5 mg. if you can give a link or instructions and at the same time, your reputation will rise. ;)
X96 [Android] (Post rus-05 # 58025007), and now oneX96 [Android]. Both firmware edited one RUS-05 person. I think there is no special difference in them, except for the launcher, but I sit on the first and I consider it the best for our box)

Post has been editedncux3012 - 26.03.17, 09:30



Rep: (7)
John-Veg @ 03/26/17, 09:09*
And then inserted the nonsense batteries at 1.4 V - it does not plow. Inserted a little better - plows. I heard many inexpensive Chinese consoles so.
But the batteries should work up to 1 in
That's done correctly, the voltage on the batteries can and shows 1.4B But the capacity in them has already fallen over time and it is not enough small to eat the strength of the current.



Rep: (25)
* z2zbigben , Thank you, tell me, but how to remove the patch?



Rep: (322)
* Serg71kz,
On top to roll the tight firmware if there is no backup, and on the future before changing the system, make backup.



Rep: (5)
* z2zbigben
but someone tell me, is not found in the header, where instructions on how to sew using tvpr through SD card and what to do action?



Rep: (106)
Killer Beach @ 03/26/17, 9:42*
but someone tell me, is not found in the header, where instructions on how to sew using tvpr through SD card and what to do action?
X96 [Android] (post rus-05 # 54116135), 3 and 4 spoiler



Rep: (7)
Guys, tell me, and programmatically you can increase the frequency of C1.5GHz to 12 GHz on the stock firmware 1.1.1 without flashing, it is not infusable for overheating so-like another radiator + kuller 80 * 80. The temperature is above 47 В° not rises.



Rep: (5)
* ncux3012
thanks again will deal later. Well, for help later reputation is also enhanced.



Rep: (4)
Killer Beach @ 03/26/17, 9:42*
but someone tell me, is not found in the header, where instructions on how to sew using tvpr through SD card and what to do action?
It is not necessary to sew it, stock recovery for the eyes.
Almost all the firmware is in the variant for the CD card, look easy.

Post has been editedextralights - 26.03.17, 09:49



Rep: (47)
NCUX3012 @ 03/26/2017, 01:31*
sadly (
How is 1.5 inferior 2 MHz?
On 2 MHz, only the heating is a brutal and more difference did not notice !! You can enlighten the difference !!

Post has been editedErnes89 - 26.03.17, 11:10



Rep: (106)
Ernes89 @ 03/26/17, 11:06*
How is 1.5 inferior 2 MHz?
On 2 MHz, only the heating is a brutal and more difference did not notice !! You can enlighten the difference
there is a difference. The heating does not care for me (it is worth the radiator) as I wrote earlier, only on the firmware from 2 MHz normally shows the Torrent TV (M3U). I do not know why so, but not on one other firmware it does not work (slideshow). Eden Sheet walked normally, but there and the quality may be different because of this. There is no more difference. Since the box is used according to your direct destination (viewing TV) for me this is a very significant difference. I liked the Android TV, but it is also a frequency of 1.5 MHz. I tried to change the kernel, but everything is in vain. Therefore, at the moment, for me, the best firmware is from M8SII.



Rep: (47)
NCUX3012 @ 03/26/2017, 11:20*
As I wrote earlier, only the Torrent TV (M3U) turns on the firmware from 2 MHz.
I put the player perfect and everything works well !!
X96 [Android] (post Ernes89 # 59754952)Post updated



Rep: (106)
* Ernes89 ,
Ernes89 @ 03/26/17, 12:58 *
I put the player perfect and everything works well !!
Perfect player can not handle HLS stream, it is necessary to quickly switch channels. I use PrTVE, it shows an excellent picture, but only for 2 MHz. Perfect is even a paid version, but in comparison with the HRT, nothing

Post has been editedncux3012 - 26.03.17, 13:06



Rep: (0)
Tell me and the RootExplorer program can I download for free? And then on playmarks she paid 175 rubles.


Full version    

Help     rules

Now: 01/23/21, 20:00