KII Pro DVB-S2 / T2 [Android] | [TV Box] [DVB-S2 / T2] [AMLogic S905]
DVB-S2 / T2 TV Box on Amlogic S905
under the messages to which you want to add links.
g-victor If you do not complicate reset please refer to the latest firmware, and the fact that I can not find. Thanks.kii pro at s905 to sink iOS, everything seems to work, but there is a caveat to your WiFi router, operating in 802.11n mode ONLY connect does not want to - see, trying, but ...
CFG80211-ERROR) wl_cfg80211_connect: Connectting witha8: 57: 4e: 06: 92: 02 channel (6) ssid "TPLINK", len (6)
connect failed event = 0 e->status 1 e->reason 0
wl_bss_connect_done: Report connect result - connection failed
In 802.11g mode - everything is fine.
Does anyone have it? From firmware depends? Can someone check the work in 802.11n mode (which is not in mixed 802.11g / n mode, only n)?
It must be exactly n, because I want to IPTV for WiFi, but there are other standards raped ether and smoothness is not achieved.
And yet, for some reason, even after switching off (maybe it still sleep) on the router is seen as a client - bud WiFi does not turn off for some reason ...
Post has been editedtimbo766 - 16.02.20, 20:57
CFG80211-ERROR) wl_cfg80211_connect: Connectting witha8: 57: 4e: 06: 92: 02 channel (6) ssid "TPLINK", len (6)
connect failed event = 0 e->status 1 e->reason 0
wl_bss_connect_done: Report connect result - connection failed
In 802.11g mode - everything is fine.
Does anyone have it? From firmware depends? Can someone check the work in 802.11n mode (which is not in mixed 802.11g / n mode, only n)?
It must be exactly n, because I want to IPTV for WiFi, but there are other standards raped ether and smoothness is not achieved.
And yet, for some reason, even after switching off (maybe it still sleep) on the router is seen as a client - bud WiFi does not turn off for some reason ...
Post has been editedtimbo766 - 16.02.20, 20:57
Yes, already I tried different -odinakovo. To begin to know that at least someone is working in the n standard, or so the same, and if works, on what firmware.
timbo766 @ 17.02.20, 16:02
Yes, already I tried different -odinakovo. To begin to know that at least someone is working in the n standard
Also, at the very top box make the following settings:https://ru.c.mi.com/thread-1869122-1-1.html
Post has been editedkornn - 17.02.20, 11:19
Reason for editing: Editing
channel width changed, encryption, and so cut off from the other router is the same garbage: strictly n mode does not connect, to mix g / n and simple g - without key problems, other devices (smartphone, tablet, mediaboks) problemm do not know.. Does anyone in their try to force into the n standard - can at all so? Or piercing Stock curve.
Post has been editedtimbo766 - 17.02.20, 11:54
Post has been editedtimbo766 - 17.02.20, 11:54
Guys what is not realizing
To reset rezet malyasik firmware so now it does not start dvbt2 black screen and freeze
To reset rezet malyasik firmware so now it does not start dvbt2 black screen and freeze
neon4ik333 , Gave in repair, rebuilt. The problem was due to the absence of interference resistance usb connectors.Send someone, please, img file for Kii Pro version S905 DDR3. Nowhere can not find a normal way, with flashing gives 0x10105002 or 0x10105004. I will be grateful)
Hello! Experts! Advice on this issue with the sound.
Boxing (KiiPRO S905) connected through HDMI to the TV. From TV to the amp is a standard minijack audio cable. When you watch the telly and people talk, the speakers continually interference as Bud man standing on strong wind with a microphone.
TV and lace with amps fall away, because if the sound is not boxing - it was clean. No extraneous noise is not. Only with boxing such nonsense.
Maybe somewhere something android twist itself or box just so shitty sound output via HDMI.
How else to amp can sound output? That it was parallel to the image.
Thank.
Post has been editedMiceRus - 19.03.20, 17:05
Boxing (KiiPRO S905) connected through HDMI to the TV. From TV to the amp is a standard minijack audio cable. When you watch the telly and people talk, the speakers continually interference as Bud man standing on strong wind with a microphone.
TV and lace with amps fall away, because if the sound is not boxing - it was clean. No extraneous noise is not. Only with boxing such nonsense.
Maybe somewhere something android twist itself or box just so shitty sound output via HDMI.
How else to amp can sound output? That it was parallel to the image.
Thank.
Post has been editedMiceRus - 19.03.20, 17:05
shnurok12 @ 19.03.20, 22:52
cords visible not screened
HDMI? After all, only he was not tested.
Post has been editedMiceRus - 20.03.20, 19:43
Hello, please tell me whether it is possible to put android 7 on an older revision k2 pro?
What is the best firmware currently exists for this set-top box?
How can you search for cable channels dvb-c?
What is the best firmware currently exists for this set-top box?
How can you search for cable channels dvb-c?
Emakcom @ 23.03.20, 21:08
whether you can put the android 7 on an older revision k2 pro?
not.
Emakcom @ 23.03.20, 21:08
What is the best firmware currently exists for this set-top box?
Some like Malaysk, I use WeOS, but the sink is quite norms.
Emakcom @ 23.03.20, 21:08
How can you search for cable channels dvb-c?
Only on LibreElec it seems ... on Android does.
MiceRus I have optics goes from boxing at the amp. No interference. In your case, you can try to power up all connected devices (TV, Boxing, amp) through the extension (tee) without grounding, that is flat rosette on two holes.©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement