You can leave an order for a modem from any firmware of any region in the subject line, it will be executed as soon as possible.
There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply by creating a new topic in the sectionI want to be curator(having previously studiedRules and recommendations for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editeddestroyer71 - 21.08.19, 07:12

Installation Instructions:
1. DownloadOdinand modem below.
2. Run Odin, click on the button."CP" and select the file MODEM_XXXXXXXXXXXXXX_ODIN.tar.md5 downloaded earlier.
3. We transfer the phone to the firmware mode. To do this, in the off state, press and hold the buttons"Volume down (Volume Down" , "Home (Home)" and button "Power" and after the menu appears with a yellow triangle, press the button Volume Up .
4. Connect the device to the PC via USB cable(Preferably original USB 2.0 cable) . If for any reason the PC does not recognize your computer, we recommend reinstalling "Samsung USB Driver" , change the cable or try the rear USB ports of the PC.
5. Press the button"Start" and do not touch the device until the reboot.
Done! The modem was successfully installed.

Attention!!! If your OS is updated, then you cannot install modems from previous versions of Android! Otherwise, you will fly IMEI!

List of modems to install via Odin:

G920FXXU3DPEO |6.0.1 | May 2016 | MODEM_G920FXXU3DPEO_ODIN.tar.md5(38.82 MB)

G920FXXU3DPDP |6.0.1 | April 2016 | MODEM_G920FXXU3DPDP_ODIN.tar.md5(38.82 MB)

G920FXXU3DPCA |6.0.1 | March 2016 | MODEM_G920FXXU3DPCA_ODIN.tar.md5(38.76 MB)

G920FXXS3DPB3 |6.0.1 | February 2016 | MODEM_G920FXXS3DPB3_ODIN.tar.md5(38.76 MB)

G920FXXS3DPB1 |6.0.1 | February 2016 | MODEM_G920FXXS3DPB1_ODIN.tar.md5(38.76 MB)

G920FXXS3DPBK |6.0.1 | February 2016 | MODEM_G920FXXU3DPBK_ODIN.tar.md5(38.76 MB)

G920FXXU3DPB8 |6.0.1 | February 2016 | MODEM_G920FXXU3DPB8_ODIN.tar.md5(38.76 MB)

G920FXXU3DPB6 |6.0.1 | February 2016 | MODEM_G920FXXU3DPB6_ODIN.tar.md5(38.76 MB)

G920FXXU3DPAD |6.0.1 | January 2016 | MODEM_G920FXXU3DPAD_ODIN.tar.md5(38.76 MB)

G920FXXU3QOJN |5.1.1 | December 2015 | MODEM_G920FXXU3QOJN_ODIN.tar.md5(38.57 MB)

G920FXXU3COJ7 |5.1.1 | October 2015 | MODEM_G920FXXU3COJ7_ODIN.tar.md5(38.56 MB)





Post has been editedKodIHTIK - 19.06.16, 19:48

Post has been editedDeaborn27 - 09.10.16, 23:42

CP_G920FXXU5EQAC.tar.md5(39.23 MB)


Post has been editedInfe [R] noS - 11.04.17, 17:04

Technical post number 2

Ril - a dedicated interface between the modem, the kernel and firmware files directly. If you put another modem, other than the one that comes by default with iOS, it is desirable to replace and RIL (the one who knows how to work correctly with the selected modem). The idea is that you need to take RIL on the firmware with which the modem was. This will be the link between your modem and your current firmware. We select the modem and look for a suitable RIL. This can really improve the quality of communication and partial answers to the question: why different firmware modems behave differently.

Installing RIL is optional, but can improve modem performance.

Note!!! RIL is an ordinary library (set of libraries), its installation is done by copying the file to the \ system \ lib system folder. Therefore, to install RIL, you need root access obtained in any available way. RIL files can be changed only within one version of the operating system. Be careful! For AOKP / AOSP firmware and their modifications (for example, CM), RIL files from stock firmware (in general) are not suitable

List of required files for RIL.



Thank uv.Pako777 for information.

Post has been editedKodIHTIK - 31.03.16, 08:59

I will be the first. It is clear that nothing is clear and I still use the phone as single-value. But still I will ask the 100,500th time. Has anyone found a way out with a 4g network blade when 2 sims are active? Modems from other firmware do not help.

There are no options yet except for the firmware of another modem .. In the SC, a shaft of duos with 4G connection dumps. Recommend waiting for updates.

N_Ilja,
so which one? I have tried everything at the moment - in any case, sooner or later it falls off before the reboot / airplane mode, plus the wild battery zhor (30% from 00 to 7 in the morning)

Only the selection method will help. All in different ways. I still scored and wait for updates from samsa.
I can say that after the SC and the replacement of the firmware, I regularly worked with one sim for 2 days. After installing the second sim card, the breaks began after 10 minutes. Removing from the device 2 sim problem with 4G does not solve, probably a complete reset is necessary.

N_Ilja,
and what service were you in? when I went - they said that there was not a single appeal on duos. From TP wrote - make a general reset. I did not give the bodies, because the meaning. I was also told about the update - “we know nothing”.

In the collection of modems SM-G920F MM.


G920FXXU3DPBT_Modem & Ril.zip(40.04 MB)
G920FXXU3DPCA_Modem & Ril.zip(40.04 MB)
G920FXXU3DPCJ_Modem & Ril.zip(40.04 MB)


Post has been editediron1971 - 06.04.16, 21:59

dabsavagemessiahzine.com, In St. Petersburg on the street. Yefimov.

I have already flashed 3 different modems and still the Internet is falling off, fucking fucking furious ((((

shreddder ,
Same . You have to forget about 2 sim. It is not the network that falls off, but the phone is off the network when 2 sim cards are active. He sees the network but is disconnected from it. This is a software crash of some sort. And there is no way out. This is helped by the modem's firmware, and for example, it didn’t help me, because in our city there is a dead OpSoC equipment and 4 g, which is not calculated. Basically dumps on 4 g occur.

Nope, I already transferred to 3G and 2G the Internet still falls off ((

Has anyone applied to TP and received from them any adequate answer about the Internet dump on firmware 6.0.1?
What do they say?
And then a friend has the same problem ... rollback to 5.1.1 doesn't really want to ... maybe you can just wait for the fixes?

I applied to Samsung for the University. The only medicine I was offered. Re-flashing the latest Russian firmware and general reset. Verdict does not help!

I will share my balalaikas:
There are 64 GB, dual, lives under the sim card MTS and foreign sim card.
On the 5.1 Android, the jokes started - with the network indication, I did not get around 40-50% of the calls, only then I received SMS about the missed calls.

As a result, he took it to the SC, replaced the cable and some part of the board. It did not help, I took it a second time - they replaced the same thing again, and at about the same time it was updated to Android 6.
After that (knocking on a tree) such overruns disappeared, only occasionally, again, when the full network is indicated, it does not go on the Internet, but these are epizhotic phenomena. Usually in Lte mode.

Moral - you can kick the SC to change the giblets of the phone, maybe it will help.

To everyone

Numda is so good. but I personally have no service center and one trip to the service center is 45 days. while he will ride and the warranty will end: D

The warranty is extended during the stay of the goods in the SC.

From personal experience, modems from the Philippine and British (latest) firmwares seemed to be the best on my Duos. Saves switching from auto mode to 3g-only. Opsosos of the first sim card Tele2, the second MTS.

It seems to me that it is worth adding themes to the header that the installation of a modem (another region) "turns off" the receipt of OTA updates.

Post has been editedsip1970 - 09.04.16, 22:05