I have nothing against ROMODELOV !!!!!!!!! I just said that the test THEY THEM ON 3/32 !!!
I am watching and waiting here to peck ..

Whoops, thanks, do not even know how it happened ;-)

Glamurniy ,
It's not even the fact that they are testing on 3/32, I had a 2/16, I put it a different port, and firmware version, and from different portirovschikov. So what I am, that on some ports, everything worked as it should, without glitches, crashes, smoothly and steadily (not with the box of course, a bit had to be the hands to bring the core to mind, at some ports), and on which it did not want 2 / 16 work normally, even with tambourines and dancing.
So the conclusion is not the fault of 2/16, as they say here all individually, because our phones were collected from a huge pile of parts from different manufacturers, to take only the screens, they already 3 versions, but if you dig deeper in every detail, you will be shocking: D

P.S.Kak said collected from T .... a bullet: rofl:

P.S # 2 And finally, let's close this topic. Thank you for understanding.

Post has been editedBallance2016 - 15.01.18, 23:36

See the gallery settings.
And another thing: Application->The default that is exposed?

Hello to all!
Please tell me got a choice to update MIUI to 8 to 9, and then maybe put a route-right?
The situation has changed so broken screen and then phone became mercilessly battery plant. On the day we have to charge almost three times. Here, I read the information that you need to do a battery calibration through route-law. Ruth does not have rights. When installing the Root-rights found that a new version of miui, so I want to ask the community. It is better to flash miui to 9, and then set the route-law (9 possible to install them?) Or just install Root-law, calibrate the battery, and then to flash at 9?
I hope it is clear all laid out.

And what makes you think that this is impossible?)
Here is one of the options
P.S. And what to do, you decide))

Post has been editedmul'tik.66 - 16.01.18, 08:17

This item has tvrp wipe battery stats bin, through "calibrate" Statistics ..Xiaomi Redmi Note 3 Pro - firmware MIUI (Post gyord # 68015612)

SU:



Post has been editedsergo2073 - 16.01.18, 08:37

Hello. Recently, a problem has arisen: for no reason at all the camera, microphone, sound output (both through speakers and headphones) stop working. When playing music through the stock player, the "file is damaged" comes out.
The video plays, but without sound (MX Player). Through the stock player did not check.
When you turn on the camera goes "can not connect to the camera."
Similar goes when trying to record on the recorder.
There is no notification sound, only vibro works. When you restart the device, the problem goes away.
On the system: MIUI 8.5.7.0 Stable, TWRP + root.

mul'tik.66,
in the gallery of the default application has not been selected, I am now chosen - rebooted and that does not change, nothing too much disconnected, so optimization can affect it? Field nor any manipulations did not make

Post has been editedmaloi83 - 16.01.18, 09:28

gyord,
This firmware from the Portuguese?

Ilham14 , Such as the Brazilians

Guys who2/16 Play around with another assembly.
Basis of epics (close to the drain notification cool) the core from Turks (IMHO most stable).
Added byKernel toolkitandmagisk(Ruth).

After installing vystvit in Kernel Toolkit sledushchie optionsand select "apply when downloading".

Camera highly recommendthis oneweek was not a single blade.

Gathered under him, so critics are forested, on the other hand welcomed constructive.

Downloadyadisk.
Mega

Post has been editedKUS333 - 16.01.18, 18:49

Prompt, which kernel supports phone unlocking double tapom, and what better place to flash MIUI 9 Android 6.0 V8.1.11. And how it all installed?

sndrm ,
Read here
Xiaomi Redmi Note 3 Pro - Core
And after a full understanding of the install. backup mandatory

I asked myself, and I’ll answer: to increase the number of volume levels in Music without using Xposed, you need to add a line to build.prop
ro.config.media_vol_steps = 30
Without spaces. And save. Then restart and everything will be ready.
Backup is required.
MuiuPro 9.2.1.0
Edited by thisР’В® BuildProp Editor (Post by stassson # 63242919)

Post has been editeddr-dima - 16.01.18, 13:31

Which of custom kernels 7 android (MIUI9_MIUIPRO_PORT_HYDROGEN_TO_KENZO_7.12.28_MOD_KISASANYA_AROMA) can normally disable quick charging (to Agni when disconnecting the tester still writes consumption of more than 6 volts to zetsubou such option in kernelauditore not present, but the tester for charging writes consumption of more than 6 volts ). I would not want to use the fast charge mode, but all the chargers at home are aukey, with QC support.

I stitched the phone, turned off the electricity during the firmware, after which the phone didn’t respond completely to the phone but the PC defines it as an unknown device, the flash fails to produce an error, what can I do?

Hello !
tell me where to look? notifications are not displayed on the lock screen in the settings all-inclusive change of themes does not help
firmware KENZO_7.12.28_MOD_KISASANYA_Aroma V6

PalychRv,
I tried to flash through mi flash failed mi flash error "object reference not specified in object instance"

Posted on 1/16/2018 at 15:01:

PalychRv,
Fastboot also does not define